Annaror LS-CL-I24W-M-C

Annaror 12-inch Square Motion Sensor LED Ceiling Light User Manual

Model: LS-CL-I24W-M-C

1. Introduction

Thank you for choosing the Annaror 12-inch Square Motion Sensor LED Ceiling Light. This hardwired flush mount light fixture is designed for indoor use, featuring an integrated motion sensor, selectable color temperatures, and adjustable timer settings for convenience and energy efficiency. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

2. Safety Instructions

WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can lead to electric shock or fire.

  • Ensure the power supply is turned off before beginning installation.
  • All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
  • Consult a qualified electrician if you are unsure about the installation process.
  • Do not install near heat sources or in areas with excessive moisture.
  • This product is designed for indoor use only.
  • Do not attempt to modify the fixture.

3. Package Contents

Verify that all components are present before installation:

  • Annaror 12-inch Square Motion Sensor LED Ceiling Light
  • Mounting Hardware (screws, wire nuts)
  • User Manual

4. Specifications

BrandAnnaror
Model NameLS-CL-I24W-M-C
Dimensions12"L x 12"W x 0.98"H
Power SourceCorded Electric
Voltage120 Volts (AC)
Wattage24 Watts
Brightness2400 Lumens
Color Temperature3000K (Warm White), 4000K (Natural White), 5000K (Cool White) Selectable
Special FeaturesAdjustable Color Temperature, Energy Efficient, Motion Sensor
Mounting TypeCeiling Mount / Wall Mount
Indoor/Outdoor UsageIndoor
MaterialPlastic

5. Setup and Installation

This fixture is designed for hardwired installation. Ensure power is OFF at the circuit breaker before proceeding.

  1. Prepare the Fixture: Rotate and remove the plastic bracket from the light fixture.
  2. Mount the Bracket: Attach the plastic bracket to the junction box on your ceiling or wall using the provided mounting hardware.
  3. Connect Wiring: Hook the fixture with a hanging rope (if available) to support it during wiring. Connect the household wires to the fixture wires using wire nuts:
    • Connect the black wire (Live) from the junction box to the black wire of the fixture.
    • Connect the white wire (Neutral) from the junction box to the white wire of the fixture.
    • Connect the ground wire from the junction box to the ground wire of the fixture.
  4. Secure the Fixture: Carefully push the light fixture upwards, aligning it with the mounted bracket. Rotate the fixture to secure it firmly to the bracket.
Diagram showing four steps for hardwired installation of the ceiling light.
Figure 5.1: Hardwired Installation Steps. (1) Remove bracket, (2) Attach bracket to junction box, (3) Connect wires, (4) Secure fixture.
Detailed diagram showing the easy hardwired installation process with numbered steps and wire connections.
Figure 5.2: Visual guide for easy hardwired installation.

6. Operating Instructions

The Annaror motion sensor ceiling light offers adjustable color temperature, multiple operating modes, and a customizable timer.

6.1 Color Temperature Selection (CCT)

Before final installation, select your desired color temperature using the toggle switch located on the fixture. This setting cannot be changed after the fixture is fully installed.

  • 3000K: Warm White
  • 4000K: Natural White
  • 5000K: Cool White
Image showing three rooms illuminated with 3000K Warm White, 4000K Natural White, and 5000K Cool White light, with a toggle switch for selection.
Figure 6.1: Color Temperature Selection Switch. Choose between 3000K, 4000K, or 5000K before installation.

6.2 Operating Modes

The light features a switch to select between three operating modes:

  • ON Mode: The light remains continuously on, functioning as a standard ceiling lamp without motion sensing.
  • G Mode (Only Motion Sensor): The light activates when motion is detected, regardless of ambient light levels (day or night).
  • AUTO Mode (Motion Sensor + Light Sensor): The light activates only when motion is detected and the ambient light level is low (darkness).
Diagram illustrating three operating modes: ON (always on), G (motion sensor only, day and night), and Auto (motion sensor + light sensor, only in darkness).
Figure 6.2: Operating Mode Selection. Choose between ON, G (Motion Sensor Only), or AUTO (Motion Sensor + Light Sensor).
Image showing the three modes (Auto, G, ON) with corresponding icons for motion and light sensing, and a toggle switch.
Figure 6.3: Detailed view of the mode selection switch on the fixture.

6.3 Timer Settings

When in G or AUTO mode, the light will automatically turn off after a set period of no motion detection. Use the timer switch on the fixture to select the desired duration:

  • 30s: Light stays on for 30 seconds after last motion detected.
  • 120s: Light stays on for 120 seconds after last motion detected.
  • 180s: Light stays on for 180 seconds after last motion detected.
Close-up of the light fixture showing the motion sensor and the switches for mode selection (Auto-G-ON) and timer settings (30s, 120s, 180s).
Figure 6.4: Timer and Mode Switches. Adjust the hold time for motion-activated lighting.

6.4 Motion Sensor Detection Range

The motion sensor has a 360° detection range and a 120° sensing angle. It can detect motion within 9-20 feet, with an optimal installation height of 8-12 feet.

Diagram illustrating the 360-degree detection range and 120-degree sensing angle of the motion sensor, with an optimal installation height of 8-12 feet and a maximum detection range of 20 feet.
Figure 6.5: Motion Sensor Detection Range and Angle.

6.5 Product Video Overview

Video 6.1: This video demonstrates the motion detection capabilities, different operating modes (ON, Auto, G), timer settings, and various application scenarios for the Annaror motion sensor ceiling light.

7. Maintenance

To ensure the longevity and optimal performance of your Annaror LED Ceiling Light, follow these simple maintenance guidelines:

  • Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
  • LEDs: The integrated LED lights are designed for long life and are not user-replaceable.

8. Troubleshooting

If you encounter issues with your Annaror Motion Sensor LED Ceiling Light, refer to the following troubleshooting guide:

ProblemPossible CauseSolution
Light does not turn on.
  • No power supply.
  • Incorrect wiring.
  • Light sensor in AUTO mode detects sufficient ambient light.
  • Motion sensor not detecting movement.
  • Check circuit breaker/fuse.
  • Verify wiring connections (refer to Section 5).
  • Switch to G mode (motion sensor only) or ON mode.
  • Ensure motion is within detection range and angle.
Light stays on continuously.
  • Fixture is in ON mode.
  • Constant motion detected within range.
  • Switch to G or AUTO mode.
  • Ensure no continuous motion (e.g., pets, drafts) in the detection area.
Light turns on/off randomly.
  • Interference with motion sensor.
  • Fluctuating ambient light in AUTO mode.
  • Ensure no objects are obstructing or interfering with the sensor.
  • Consider switching to G mode if ambient light is inconsistent.
Motion sensor range is poor.
  • Incorrect installation height.
  • Obstructions.
  • Verify installation height is within 8-12 feet.
  • Clear any objects blocking the sensor's view.

9. Warranty and Support

Annaror products are manufactured to high-quality standards. For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.