Introduction
This manual provides detailed instructions for the CAMECHO Android 11 Car Stereo Radio, Model B0CMZYBR41. This unit is specifically designed for Ford Fusion models from 2010 to 2012, offering advanced features such as Wireless Apple CarPlay, Android Auto, GPS Navigation, Bluetooth, Wi-Fi, FM/RDS radio, and AHD backup camera support. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
Image: CAMECHO Android 11 Car Stereo installed in a Ford Fusion dashboard, showcasing the large 10.1-inch touchscreen display with various app icons.
Setup & Installation
What's in the Box
Verify that all components are present in the package before beginning installation:
- 1 x Android Head Unit
- 1 x Radio Housing
- 1 x AHD Backup Camera
- 1 x External Microphone
- 1 x Protocol Box (Canbus)
- 1 x GPS Antenna
- 1 x Power Cable
- 1 x Radio Head
- 1 x RCA Cable
- 1 x Rear Camera Input Cable
- 2 x USB Cables
- 1 x Instruction Manual
- Installation Tool (plastic pry tools)
Video: This video demonstrates the unboxing and shows all the components included in the package for the CAMECHO Android 11 Car Stereo.
Image: A visual representation of the main unit's dimensions and a clear layout of all included accessories, such as the radio antenna, Canbus, microphone, RCA cables, AHD rear camera, power cable, USB cables, GPS antenna, rear camera input cable, user manual, and installation tool.
Wiring Diagrams & Connections
Proper wiring is crucial for the functionality of your car stereo. Refer to the following diagrams for correct connections.
Steering Wheel Control Setup
Ensure the 8-pin cable is plugged into the head unit connector and the CANBUS box is connected. After connecting the Canbus, you need to set the protocol correctly for steering wheel controls to function. Navigate to: Car Settings -> Factory Setting (password: 8888) -> Protocol settings, then choose Xinpu + the year and model of your car.
Image: Detailed diagram showing the CANBUS connection and the software interface for configuring steering wheel controls, including the required password and protocol selection.
No Sound Troubleshooting
If you experience no sound after installation, follow these steps:
- Connect the AUX IN R/L and AUDIO OUT R/L from the RCA cable to AUX IN R/L from the Power harness.
- Connect the AMP cable to the ACC cable of the Power harness.
- Open the 'Car Amplifier' option on the drag-down page of the top bar.
- For external power amplifiers, connect the power cable of the amplifier to the ACC cable of the Power harness.
Image: Visual guide for resolving no sound issues, detailing RCA connections, AMP cable connection, and the 'Car Amplifier' setting within the stereo's interface.
Reversing Camera Installation
The reversing input must be plugged in even if the reversing camera is not used. For camera wiring:
- Connect the positive pole of the power supply of the car's reversing light.
- Connect the negative pole of the power supply of the car's reversing light.
- The reversing trigger is controlled by the stereo, so no additional connection is required.
After wiring, set the camera resolution via: Car Settings -> Factory Settings (password: 8888) -> Protocol parameter settings -> Reversing settings -> Reverse video resolution. Choose 'NTSC/PAL' or 'AHD/25', then restart your car.
Image: Step-by-step wiring guide for the AHD reversing camera, including electrical connections and the necessary software configuration within the car stereo settings.
Operating Instructions
Video: This video provides an overview of the Android Car Stereo's user interface, demonstrating features like Wi-Fi connectivity, GPS navigation, music playback, radio functions, Bluetooth calls, and various app functionalities.
Wireless Apple CarPlay & Android Auto
Connect your smartphone wirelessly for seamless integration of navigation, music, calls, and messages.
How to connect Wireless Apple CarPlay:
- Enable Bluetooth on your iPhone and pair it with the car radio.
- Open the "Zlink" application on the car stereo.
- If the connection fails, connect your phone to the car stereo's hotspot, then click the "Zlink" app again. Maintain both Bluetooth and hotspot connections.
How to use Wireless Android Auto:
- Ensure you have installed the "Android Auto" app on your Android phone.
- Enable Bluetooth on your Android phone and pair it with the car radio.
- Open the "Zlink" application on the car stereo.
Image: Display of Wireless Apple CarPlay and Android Auto interfaces, illustrating the connection process and available features on the car stereo screen.
Bluetooth Functions
The built-in Bluetooth module supports hands-free calling, A2DP music streaming, and phonebook download for convenient communication and entertainment.
Image: The Bluetooth interface showing options for hands-free calls, music playback, and phonebook access.
GPS Navigation
Utilize both online and offline navigation features to guide you to your destination. The system supports various map applications.
Image: The GPS navigation screen displaying a map with route information and icons for popular navigation applications.
Wi-Fi Connection
Connect to Wi-Fi hotspots to browse the internet, stream media, and download applications directly on your car stereo.
Image: The Wi-Fi settings screen and a demonstration of streaming video content, highlighting the internet connectivity feature.
FM/RDS Radio
Enjoy your favorite radio stations with 18 FM presets. The RDS function provides additional information like station name and song titles.
Image: The FM radio interface displaying frequency selection, RDS information, and preset options.
HiFi Sound System
Experience high-fidelity sound with the integrated audio system. Adjust equalizer settings to customize your listening experience.
Image: The HiFi sound equalizer screen, showing customizable audio settings and presets like Rock, Jazz, and Pop.
Split Screen Function
Multitask efficiently by using the split-screen feature, allowing you to run two applications simultaneously, such as navigation and music playback.
Image: The split-screen feature in action, showing a navigation map on one side and a music player on the other, demonstrating simultaneous application usage.
Video Playback
The unit supports 1080P video playback, allowing you to enjoy high-quality video content. Video output to headrest monitors is also supported.
Image: Illustration of the full RCA output feature, showing video content being displayed on rear headrest screens for passenger entertainment.
Maintenance
To ensure the longevity and optimal performance of your CAMECHO car stereo, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the touchscreen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Refer to the system settings for update options.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent issues.
Troubleshooting
This section addresses common issues you might encounter with your car stereo. For more complex problems, please contact customer support.
- No Power: Check all power connections, including the main power cable and ACC wire. Ensure the car's fuse is not blown.
- No Sound: Refer to the 'No Sound Troubleshooting' section under Setup & Installation for detailed steps regarding RCA and AMP cable connections.
- Steering Wheel Controls Not Working: Ensure the CANBUS box is correctly connected and the protocol settings are configured as described in the 'Steering Wheel Control Setup' section.
- GPS Signal Issues: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky. Check GPS detection in settings.
- Bluetooth/Wi-Fi Connectivity Problems: Ensure Bluetooth and Wi-Fi are enabled on both the stereo and your device. Try restarting both devices. For CarPlay/Android Auto, ensure the 'Zlink' app is running and connections are stable.
- Touchscreen Unresponsive: Try restarting the unit. If the issue persists, a factory reset might be necessary (note: this will erase all user data).
- Backup Camera Not Displaying: Verify the camera wiring and ensure the camera resolution settings are correct as outlined in the 'Reversing Camera Installation' section.
Specifications
| Brand | CAMECHO |
| Model Name | CAMECHO |
| Vehicle Service Type | Car |
| Screen Size | 10.1 Inches |
| Special Feature | Touchscreen |
| Connectivity Technology | Bluetooth |
| Map Type | Worldwide |
| Audio Output Mode | Stereo |
| Mounting Type | Dashboard Mount |
| Resolution | 1024 x 600 |
| Operating System | Android |
| Memory Storage Capacity | 32 GB |
| Touch Screen Type | Capacitive |
| Display Type | LCD |
| Human-Interface Input | Touchscreen |
| Compatible Devices | Ford Fusion 2010, 2011, 2012 |
| Control Method | Touch |
| Supported Satellite Navigation System | GPS |
| Item Dimensions L x W x H | 12.7"L x 1.9"W x 14.5"H |
Warranty Information
This CAMECHO car stereo unit comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact customer support.
Customer Support
For any questions, technical assistance, or support regarding your CAMECHO Android 11 Car Stereo, please contact our customer support team:
Email: CAMECHOVIP@126.com
Our team is available to provide help and guidance for your product.
Image: A customer support representative ready to assist, with the support email address clearly visible.