Wurkkos TS10 V2 Titanium Alloy 6000K EDC Flashlight User Manual

1. Introduction

The Wurkkos TS10 V2 is a compact and powerful Everyday Carry (EDC) flashlight constructed from titanium alloy. It features a maximum output of 1400 lumens and a beam distance of up to 130 meters. The flashlight incorporates three main 90CRI LEDs for accurate color rendering at a 6000K color temperature, alongside three RGB auxiliary LEDs. Its compact size, approximately 2.8 inches in length, makes it suitable for portable use. This manual provides detailed instructions for the safe and effective use of your TS10 V2 flashlight.

Image 1.1: Wurkkos TS10 V2 Titanium Alloy Flashlight. This image displays the compact flashlight with its titanium alloy body and orange accent ring, highlighting the main LEDs and the pocket clip.

Image 1.2: Wurkkos TS10 V2 size comparison. This image shows the flashlight held in a hand, illustrating its compact dimensions of 71.5 mm (2.8 inches) in length and 21 mm (0.82 inches) head diameter.

2. Product Components

Familiarize yourself with the main components of your Wurkkos TS10 V2 flashlight.

Image 2.1: Exploded view of the Wurkkos TS10 V2. This diagram illustrates the flashlight's internal and external parts, including the 3*CSP2323 LEDs, 3*RGB auxiliary LEDs, titanium alloy body, O-rings for waterproofing, pocket clip, and tail switch.

• Main LEDs: Three high-CRI (90CRI) LEDs for primary illumination.
• Auxiliary LEDs: Three RGB LEDs for signaling and low-light indication.
• Titanium Alloy Body: Durable and corrosion-resistant housing.
• Tail Switch: Mechanical push-button switch for operation.
• Pocket Clip: For secure attachment and carrying.
• O-Rings: Provide IPX8 water resistance.
• Battery: Rechargeable lithium-ion battery (included).

3. Setup and Initial Use

3.1 Battery Installation

The Wurkkos TS10 V2 comes with a rechargeable lithium-ion battery. Before first use, ensure the battery is properly installed and any protective film is removed.

1. Unscrew the tail cap of the flashlight.
2. Remove the battery. If there is a small insulating sticker on the positive or negative terminal of the battery, peel it off.


Image 3.1: Removing the battery insulation sticker. This image shows hands removing a circular orange sticker from the end of the battery, which must be done before use.

3. Insert the battery with the positive (+) end facing towards the head of the flashlight.
4. Screw the tail cap back on securely.

3.2 Charging the Battery

The TS10 V2 does not feature integrated charging. The included battery must be charged using an external lithium-ion battery charger.

1. Remove the battery from the flashlight as described in Section 3.1.
2. Place the battery into a compatible external lithium-ion charger.


Image 3.2: External battery charger. This image shows a Wurkkos 900mAh 3.7V Li-ion battery being charged in a separate, external charging unit connected via a USB cable.

3. Follow the instructions provided with your external charger for proper charging procedures.
4. Once fully charged, reinsert the battery into the flashlight.

4. Operating Instructions (Anduril 2.0 UI)

The Wurkkos TS10 V2 utilizes the Anduril 2.0 user interface, offering both a simple mode for basic operation and an advanced mode for extensive customization.

4.1 Simple Mode

Simple mode provides straightforward access to essential functions.

• Turn On/Off: Single click the tail switch.
• Change Brightness: While on, press and hold the tail switch to ramp brightness up or down. Release to select desired level.
• Turbo Mode: From OFF, double-click the tail switch to activate maximum brightness.
• Moonlight Mode: From OFF, press and hold the tail switch briefly to activate the lowest brightness level.

4.2 Advanced Mode

Advanced mode unlocks the full potential of Anduril 2.0, allowing access to various special modes and configurations. Refer to the official Anduril 2.0 manual online for a complete guide to all functions.

• Switching to Advanced Mode: From OFF, click 10 times and hold on the 10th click.
• Auxiliary LEDs: The TS10 V2 features three RGB auxiliary LEDs. These can be configured for various states (off, low, high, blinking) and colors.


Image 4.1: Auxiliary LED modes. This image displays the auxiliary LEDs in different states: OFF, Low brightness, High brightness, and Blinking, demonstrating their configurable nature.


Image 4.2: Auxiliary LED colors and CRI comparison. This image shows the flashlight emitting blue, green, and red auxiliary light, and also illustrates the difference in color rendering index (CRI) with examples of cherries at 90CRI, 80CRI, and 70CRI.
• High CRI Main LEDs: The main LEDs offer a 90CRI (Color Rendering Index) at 6000K color temperature, designed to accurately represent colors, aiding in object observation.


Image 4.3: High CRI demonstration. This image shows the flashlight beam illuminating red flowers, emphasizing the accurate color reproduction provided by the high CRI LEDs.

5. Maintenance

5.1 Cleaning

Wipe the flashlight body with a clean, soft cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid harsh chemicals or abrasive materials.

5.2 O-Ring Lubrication

To maintain the IPX8 water resistance, periodically inspect and lubricate the O-rings with silicone grease. Replace O-rings if they appear damaged or worn.

5.3 Battery Care

Store the battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to approximately 50% capacity. Avoid fully discharging the battery, as this can reduce its lifespan.

Image 5.1: Wurkkos TS10 V2 impact and water resistance. This image demonstrates the flashlight's durability, showing it being run over by a tire (impact resistance: 1 meter/3.28 feet) and submerged in water (water resistance: IPX8).

6. Troubleshooting

If you encounter issues with your Wurkkos TS10 V2, refer to the following common troubleshooting steps. A separate troubleshooting tips guide may also be included with your product.

• Flashlight does not turn on:
  • Ensure the battery is fully charged.
  • Check that the battery is inserted with correct polarity (+ towards head).
  • Verify that the tail cap is screwed on tightly. A loose tail cap can prevent electrical contact.
  • Confirm that any protective film on the battery terminals has been removed.
• Light output is dim or flickers:
  • The battery may be low; recharge it.
  • Clean the battery contacts and flashlight threads.
  • Ensure the tail cap is securely tightened.
• Flashlight gets hot quickly:
  • High brightness modes (especially Turbo) generate significant heat. This is normal.
  • The titanium alloy body dissipates heat, but can feel hot to the touch. Reduce brightness if discomfort occurs.
• Difficulty with Anduril 2.0 UI:
  • Refer to Section 4.1 for Simple Mode operation.
  • Consult the comprehensive Anduril 2.0 manual online for detailed instructions on advanced features.

7. Specifications

Image 7.1: Wurkkos TS10 Technical Parameters. This table details the performance specifications for the flashlight in Advanced UI mode, including lumen output, runtime, beam distance, and candela for various brightness levels (H1-H8), along with impact and water resistance ratings. Note that results may vary with different batteries or environmental conditions.

Note: The above parameters are based on tests according to international flashlight testing standards (ANSI/NEMA FL1) in our laboratory. Results may vary with different batteries or under different environmental conditions.

8. Warranty and Support

8.1 Warranty Information

The Wurkkos TS10 V2 is covered by a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions.

8.2 Customer Support

For any questions, concerns, or assistance with your Wurkkos TS10 V2 flashlight, please contact Wurkkos customer support. Contact information is typically provided in the packaging or on the official Wurkkos website.