highsam Textil-Schneeketten

Highsam SUPER GRIP Snow Socks Instruction Manual

Model: Textil-Schneeketten

1. Introduction

The Highsam SUPER GRIP Snow Socks are textile snow chains designed to provide enhanced traction for vehicles on snow and ice. This product is certified according to European standard EN 16662-1, ensuring compliance with road safety regulations in EU countries where winter equipment is mandatory. This manual provides essential information for the correct installation, usage, and maintenance of your snow socks.

2. What's in the Box

Upon opening the package, please verify that all the following items are included:

  • 2 x Highsam SUPER GRIP Snow Socks
  • 1 x Pair of protective gloves
  • 1 x Waterproof storage bag
  • 1 x Instruction manual
Contents of the Highsam SUPER GRIP Snow Socks package, showing two snow socks, a pair of gloves, and a storage bag.

Image: Package contents including snow socks, gloves, and storage bag.

3. Key Features

The Highsam SUPER GRIP Snow Socks offer several advantages for winter driving:

  • EN 16662-1 Certified: Approved for road safety in all EU countries.
  • Optimal Traction: Special 3D textile design and anti-slip points ensure superior grip on ice and snow.
  • Quiet and Vibration-Free: Provides a smooth driving experience without the noise and vibrations associated with traditional metal chains.
  • ABS and ESP Compatible: Designed to work seamlessly with your vehicle's safety systems without causing damage to tires or rims.
  • Easy Installation: Lightweight and simple to install, even for individuals with limited experience.
  • Durable and Reusable: Made from tear-resistant material, designed for multiple uses after proper cleaning and drying.
Highsam Super Grip features banner with icons for easy install, reusable, ABS/EPS OK, super grip, no vibration, no harm to wheel.

Image: Overview of key features including easy installation, reusability, ABS/ESP compatibility, superior grip, and no vibration.

Comparison table showing advantages of Highsam Snow Socks over traditional snow chains, highlighting traction, installation, and vehicle compatibility.

Image: Comparison of Highsam Snow Socks with traditional snow chains, detailing benefits like maximum traction on both snow and ice, long-distance use, suitability for narrow wheel arches, no vibration, durability, easy installation, and compatibility with ABS/ASR/ESC/TCS systems.

Close-up of Highsam Snow Sock showing 3D thicker textile and innovative anti-slip spots for improved grip.

Image: Detailed view of the snow sock's construction, highlighting the 3D thicker textile and innovative anti-slip spots for enhanced performance.

4. Tire Size Compatibility

It is crucial to select the correct size of snow socks for your vehicle's tires. The Highsam SUPER GRIP Snow Socks are available in various sizes (XS, S, M, L, XL, XXL). This product is size XL. Always verify the dimensions indicated on your tires against the size chart provided.

Note: Some batches of XL size charts may contain printing errors. Always refer to the most current size chart available or consult customer service if unsure.

Tire size guide table for Highsam Snow Socks, showing compatible tire dimensions for sizes S, M, L, XL, and XXL.

Image: Comprehensive tire size guide table, listing various tire dimensions compatible with Highsam Snow Socks across different sizes (S, M, L, XL, XXL).

5. Installation Instructions

Installing your Highsam SUPER GRIP Snow Socks is a straightforward process:

  1. Step 1: Fix to Top of Tire. Position the snow sock over the top part of the tire, ensuring it covers the tread as much as possible.
  2. Step 2: Lower as Much as Possible. Pull the snow sock down over the tire as far as it will go without moving the vehicle.
  3. Step 3: Move Vehicle Slightly. Drive the car forward or backward a short distance (approximately 1 meter) to rotate the tire. This allows access to the uncovered portion of the tire.
  4. Step 4: Complete Coverage. Pull the remaining part of the snow sock over the tire to ensure full and secure coverage.
Four-step visual guide for installing Highsam Snow Socks on a car tire, showing placement, lowering, moving the car, and final adjustment.

Image: Step-by-step visual instructions for installing the snow socks, from initial placement to full tire coverage.

Installation for Different Drive Types

Install snow socks on the drive wheels of your vehicle:

  • Rear-Wheel Drive (RWD): Install on the rear wheels.
  • Front-Wheel Drive (FWD): Install on the front wheels.
  • 4-Wheel Drive (4WD): It is recommended to install on all four tires for optimal performance.
Diagram illustrating snow sock installation for rear-wheel drive, front-wheel drive, and 4-wheel drive vehicles.

Image: Guide for installing snow socks based on vehicle drive type (Rear, Front, or 4-wheel drive).

6. Operating Guidelines and Safety Information

To ensure safe and effective use of your Highsam SUPER GRIP Snow Socks, please adhere to the following guidelines:

  • Speed Limit: Do not exceed a speed of 40 km/h (25 mph) when driving with snow socks.
  • Smooth Driving: Avoid sudden acceleration, harsh braking, and sharp turns. Drive smoothly to maintain traction and prevent damage to the snow socks.
  • Appropriate Surfaces: Use the snow socks exclusively on snow and ice-covered roads.
  • Avoid Dry Surfaces: Do not use on gravel, mud, sand, or dry asphalt. Prolonged use on dry surfaces will cause rapid wear and damage to the snow socks. Remove them immediately upon reaching dry road conditions.
  • Legal Compliance: Be aware of local regulations regarding winter equipment. The EN 16662-1 certification helps avoid fines in regions where such equipment is mandatory.
Road sign indicating safe driving conditions in winter with snow on the road.

Image: Visual representation of safe driving in snowy conditions, emphasizing caution.

Map of France highlighting regions where snow chains are required, with a note about avoiding fines by carrying required snow chains.

Image: Information regarding legal requirements for snow chains in certain regions, highlighting the importance of compliance to avoid fines.

7. Maintenance

Proper maintenance will extend the lifespan of your Highsam SUPER GRIP Snow Socks:

  • Cleaning: After each use, remove the snow socks from the tires and clean them thoroughly. Rinse off any snow, ice, salt, or debris with cold water.
  • Drying: Allow the snow socks to air dry completely before storing. Do not expose them to direct sunlight for prolonged periods or use heat sources for drying, as this may damage the textile material.
  • Storage: Once dry, fold the snow socks and store them in the provided waterproof bag. Keep the bag in a cool, dry place, away from direct sunlight and chemicals.

8. Troubleshooting

If you encounter any issues during the installation or use of your Highsam SUPER GRIP Snow Socks, consider the following:

  • Difficulty Installing: Ensure the vehicle is on a flat surface and the parking brake is engaged. Try rotating the tire slightly more to gain better access for fitting.
  • Reduced Traction: Verify that the snow socks are correctly installed and fully cover the tire tread. Ensure you are not exceeding the recommended speed limit of 40 km/h.
  • Unusual Noise/Vibration: Check for proper fitment. If the snow socks are not centered or are loose, they may cause noise. Re-adjust them.

For persistent issues or further assistance, please contact our customer service.

9. Specifications

AttributeValue
Brandhighsam
ModelSUPER GRIP
Model NumberTextil-Schneeketten
MaterialNylon
Item Weight1 Kilogram
Product Dimensions (L x W x H)30 x 30 x 5 cm
Vehicle Service TypeBus, Car
CertificationEN 16662-1

10. Customer Support

If you have any questions, require further assistance, or need to report an issue with your Highsam SUPER GRIP Snow Socks, please do not hesitate to contact our customer service team. Refer to your purchase documentation for contact details.

© 2023 Highsam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.