ONAMOR Digital Ozone Generator Odor Eliminator User Manual

1. Important Safety Information

WARNING: Ozone is a powerful oxidant and can be harmful if inhaled directly. Always ensure the area is unoccupied by humans, pets, and plants during operation. Ventilate the area thoroughly after treatment before re-entry.

• Use in Unoccupied Spaces Only: This device is designed for use in unoccupied spaces. Ensure no people, pets, or plants are present in the treatment area during operation.
• Ventilation: After treatment, allow sufficient time for ozone to dissipate (at least 30-60 minutes) and ventilate the area thoroughly by opening windows and doors before re-entry.
• Electrical Safety: Do not operate with wet hands. Do not immerse the unit in water. Ensure the power cord is not damaged.
• Placement: Place the unit on a stable, flat surface. Ensure proper air circulation around the unit.
• Children and Pets: Keep out of reach of children and pets.
• Flammable Materials: Do not use near flammable liquids, gases, or materials.

For more detailed safety guidelines, please refer to the full user manual PDF available at User Manual (PDF).

2. Product Overview

The ONAMOR Digital Ozone Generator Odor Eliminator is a high-capacity device designed to remove strong odors from various spaces up to 8,000 sq. ft. It features intuitive touch controls, flexible timer settings, and a robust aluminum alloy shell for durability.

Key Features:

• High Ozone Output: 99,000 mg/h for effective odor elimination.
• Intuitive Touch Controls: User-friendly display with six buttons for easy operation.
• Flexible Timer Settings: Adjustable from 0-24 hours in 5-minute increments, with a "Cycle" function for half-hour intervals and a "Hold" setting for continuous use.
• 5-Second Delay Start: Provides time to leave the room before ozone generation begins.
• Powerful Fan: 2600 RPM fan for rapid ozone diffusion.
• Durable Construction: Robust all-aluminum alloy shell with a metal handle for portability.
• Easy Maintenance: Upgraded independent ceramic ozone plate and three replaceable fuses for extended lifespan.

Package Contents:

The image shows the ONAMOR Ozone Generator along with its accessories: a user manual, an AC power cable, a "NO ENTRY" warning card, three glass fuses, a ceramic ozone plate (preinstalled), and a washable stainless mesh (preinstalled). This illustrates everything included in the product package.

• 1 x ONAMOR Ozone Generator
• 1 x User Manual
• 1 x AC Power Cable (1.5M)
• 1 x Warning Card ("NO ENTRY")
• 3 x Glass Fuse (Preinstalled)
• 1 x Ceramic Ozone Plate (Preinstalled)
• 1 x Washable Stainless Mesh (Preinstalled)

3. Setup

Before operating your ONAMOR Ozone Generator, ensure proper setup for safe and effective use.

1. Unpack the Unit: Carefully remove the ozone generator and all accessories from the packaging.
2. Inspect for Damage: Check the unit and power cord for any signs of damage. Do not use if damaged.
3. Choose a Location: Place the ozone generator in the center of the room or area to be treated, ensuring it is on a stable, flat surface. Ensure there is adequate space around the unit for proper air circulation.
4. Clear the Area: Ensure the area is completely free of people, pets, and plants.
5. Close Windows and Doors: For optimal effectiveness, close all windows and exterior doors in the treatment area.
6. Connect Power: Plug the AC power cable into the unit's power inlet and then into a standard electrical outlet (AC110-120V).

This image displays the ONAMOR Ozone Generator positioned on a table, ready for operation. The blue unit has a black front panel with a digital display and touch controls. A warning label "CAUTION: USE IN UNOCCUPIED SPACE ONLY" is visible on the top left of the front panel, emphasizing the critical safety instruction for placement.

4. Operating Instructions

The ONAMOR Ozone Generator features intuitive touch controls for easy operation.

Control Panel Overview:

A close-up view of the ONAMOR Ozone Generator's control panel. It features a digital display showing "24:00" and six touch buttons: "OZONE", "TIME+", "TIME-", "CYCLE", "START", and "HOLD". This panel allows users to easily set the operation time and mode.

• OZONE Button: Short press to turn the ozone generation on/off.
• TIME+ Button: Increases the operation time in 5-minute increments.
• TIME- Button: Decreases the operation time in 5-minute increments.
• CYCLE Button: Activates the half-hour cycle setting.
• START Button: Short press to pause/start the operation.
• HOLD Button: Sets the unit for 24-hour continuous operation.

Operating Steps:

1. Prepare the Area: Clean up the primary odor source if possible. Ensure the area is unoccupied by people, pets, and plants.
2. Set the Timer: Use the "TIME+" and "TIME-" buttons to set the desired operation time. The timer can be set from 0 to 24 hours in 5-minute increments. For continuous operation, press the "HOLD" button. For half-hour cycles, press the "CYCLE" button.
3. Start Operation: Press the "START" button. The unit will emit 5 buzzer sounds, indicating a 5-second delay before ozone generation begins. This allows you time to safely leave the treatment area.
4. Unoccupied Space Only: Once the unit starts, immediately leave the room and ensure no one enters during the treatment. Place the "NO ENTRY" warning card on the door.
5. Post-Treatment Ventilation: After the set time expires, the unit will stop ozone generation. If the operation time was over 30 minutes, the ozone will stop 5 minutes before the end, and the fan will continue to circulate to help dissipate residual ozone. Wait at least 30-60 minutes after the unit stops, then thoroughly air out the room by opening windows and doors before re-entry.

Visual guide for the four easy steps of operation.

Recommended operating times for various room sizes.

Recommended Operating Times:

Note: These are recommended times. Adjust based on odor severity and room conditions. Always ensure the space is unoccupied during treatment.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ONAMOR Ozone Generator.

Cleaning the Fan and Mesh Filter:

This diagram illustrates the easy disassembly of the fan and mesh filter components of the ONAMOR Ozone Generator for cleaning. It shows the fan being removed and washed, and the mesh filter blocking dirt, emphasizing the user-friendly design for maintenance.

1. Power Off and Unplug: Always ensure the unit is powered off and unplugged from the electrical outlet before performing any maintenance.
2. Remove Fan Cover: Locate the fan cover on the side of the unit. Gently remove it.
3. Clean Mesh Filter: The unit is equipped with a washable stainless mesh filter. Remove the filter and clean it with water. Allow it to dry completely before reinstallation.
4. Clean Fan Blades: If necessary, carefully clean the fan blades with a soft, dry cloth or a small brush to remove any dust or debris. The fan is designed for easy disassembly for effortless cleaning.
5. Reassemble: Once clean and dry, reattach the mesh filter and fan cover securely.

Replacing Fuses:

The unit comes with three replaceable fuses for added lifespan and dependability. Refer to the full user manual for detailed instructions on fuse replacement.

Ozone Plate Maintenance:

The unit features an upgraded independent ceramic ozone plate. While designed for long life (40,000+ hours), if you notice a significant decrease in ozone output over time, the ozone plate may need cleaning or replacement. Consult the full user manual or contact customer support for guidance.

6. Troubleshooting

If you encounter issues with your ONAMOR Ozone Generator, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact ONAMOR customer service for further assistance.

7. Specifications

This image provides a visual representation of the ONAMOR Ozone Generator's dimensions (8.3 inches deep, 6.0 inches wide, 7.1 inches high) and highlights its certifications, including RoHS and FCC, indicating compliance with environmental and electronic standards.

8. Warranty and Support

ONAMOR is dedicated to providing high-quality products and excellent customer service.

• Warranty: The product includes a 12-Month Free Refund Service.
• Customer Support: If you have any questions or concerns about your ONAMOR Ozone Generator, please do not hesitate to reach out to us. We are committed to providing a satisfactory solution within 24 hours.
• Contact Information: Please refer to the contact details provided in your physical user manual or on the official ONAMOR website for the most up-to-date support information.

Note: Not for sale in California.