1. Important Safety Instructions
Please read all instructions carefully before using this appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Ensure the voltage indicated on the rating label corresponds to your mains voltage.
- Do not immerse the appliance, plug, or cord in water or any other liquid.
- Always unplug the fan from the power outlet before cleaning, assembling, or disassembling parts, and when not in use.
- Keep fingers, pencils, or any other objects out of the fan guard when it is running.
- Do not operate the fan with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- Place the fan on a stable, level surface to prevent it from tipping over.
- Do not use the fan near windows, as rain may create an electrical hazard.
- This appliance is intended for household use only.
2. Product Overview
The Elektra Stand Fan SEL-2702 is a powerful and efficient 41 cm pedestal fan designed to provide optimal air circulation in medium to large rooms. It features a robust motor, three adjustable speed settings, an oscillating function, and a tilting head for directed airflow. Its quiet operation ensures minimal disruption.
Image: The Elektra Stand Fan SEL-2702 shown alongside its product packaging, highlighting its design and branding.
3. Package Contents
Before assembly, please check that all components are present and undamaged:
- Fan Motor Unit with Control Panel
- Front Grille
- Rear Grille
- Fan Blade
- Spinner Nut
- Grille Locking Nut
- Adjustable Stand Pole (Telescopic Arm)
- Round Base
- Base Screws
- User Manual
4. Assembly Instructions
Follow these steps to assemble your Elektra Stand Fan:
- Assemble the Base: Attach the adjustable stand pole to the round base using the provided base screws. Ensure it is securely tightened for stability.
- Attach the Motor Unit: Place the fan motor unit onto the top of the stand pole. Secure it firmly, usually with a screw or locking mechanism at the back of the pole.
- Install the Rear Grille: Remove the grille locking nut from the motor shaft. Position the rear grille onto the motor unit, aligning the locating pins. Secure it with the grille locking nut, turning clockwise until tight.
- Attach the Fan Blade: Slide the fan blade onto the motor shaft, ensuring the notch on the blade aligns with the pin on the shaft. Secure the blade with the spinner nut, turning counter-clockwise until it is tight.
- Install the Front Grille: Carefully place the front grille over the rear grille, aligning the clips. Close the clips around the edge of the grilles to secure them together. Ensure the grilles are properly interlocked and the safety guard is fully closed.
Image: A detailed view of the fan's control panel, highlighting the 3 speed settings, the protective grille guard, and the oscillating function mechanism.
5. Operating Instructions
Once assembled, your Elektra Stand Fan is ready for use:
- Power On/Off: Plug the fan into a suitable electrical outlet. Use the power button or dial on the control panel to turn the fan on or off.
- Adjusting Speed: Select your desired airflow intensity using the speed control buttons or dial. Typically, settings range from 1 (low) to 3 (high).
- Oscillation Function: To activate the oscillation, push down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up.
- Tilting the Fan Head: To adjust the vertical angle of the airflow, loosen the tilt adjustment knob (usually located on the side of the motor unit), tilt the fan head to the desired position, and then tighten the knob securely.
- Adjusting Height: To change the fan's height, loosen the height adjustment collar on the stand pole, raise or lower the pole to the desired height, and then tighten the collar firmly.
6. Care and Maintenance
Regular cleaning and proper care will ensure the longevity and efficient operation of your fan:
- Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. For dust accumulation on the blades and grilles, the front grille may be carefully removed (refer to assembly instructions in reverse) to clean the blades. Ensure all parts are dry before reassembly and use.
- Storage: When not in use for extended periods, unplug the fan and store it in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
7. Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Not plugged in; Power outlet fault; Fan switch off | Ensure plug is fully inserted; Test outlet with another appliance; Turn fan switch to 'On' |
| Weak airflow | Low speed setting; Dust accumulation on blades/grilles | Increase speed setting; Clean fan blades and grilles |
| Fan is noisy | Loose parts; Fan not on a level surface; Obstruction | Check for loose screws or grilles; Place fan on a flat, stable surface; Remove any obstructions |
| Oscillation not working | Oscillation knob not engaged | Push down the oscillation knob firmly |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Elektra |
| Model Number | SEL-2702 |
| Colour | Black |
| Blade Span | 41 cm |
| Power Source | Corded Electric |
| Speed Settings | 3 |
| Special Features | Adjustable Tilt, Oscillation |
| Mounting Type | Floor Mount |
| Item Weight | 5 kg |
| Product Dimensions | 48D x 12W x 50H centimetres |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact Elektra customer support. Keep your proof of purchase for any warranty claims.
If you require further assistance or have questions not covered in this manual, please contact Elektra customer service through their official website or the contact details provided with your purchase.
