Volkano X Supersonic Series 2.1 200W Soundbar System User Manual

Introduction

Thank you for purchasing the Volkano X Supersonic Series 2.1 200W Soundbar System. This manual provides important information regarding the setup, operation, and maintenance of your new soundbar system. Please read this manual thoroughly before use and retain it for future reference.

The Volkano X Supersonic Series 2.1 200W Soundbar System offers a sleek design, a variety of connectivity options, and a wireless subwoofer for enhanced bass, providing a superior audio experience for your home entertainment.

Package Contents

Before you begin, please ensure all items listed below are present in your package:

• 1 x Volkano X Supersonic Series 2.1 200W Soundbar
• 1 x Wireless Subwoofer
• 1 x Optical Cable
• 1 x Power Adapter
• 1 x Remote Control
• 1 x Instruction Manual (this document)

Image: The package contents laid out, showing the soundbar, wireless subwoofer, remote control, optical cable, power adapter, and instruction manual.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not expose the unit to rain, moisture, or extreme temperatures.
• Do not open the casing. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the unit.
• Use only the provided power adapter.
• Keep out of reach of children.

Setup

1. Placement

Place the soundbar on a stable, flat surface directly in front of your television for optimal sound dispersion. The wireless subwoofer can be placed anywhere in the room, ideally within 10 meters (33 feet) of the soundbar for best wireless connection.

Image: The Volkano soundbar placed below a television, with the wireless subwoofer positioned on the floor nearby, illustrating a typical home setup.

2. Connecting the Soundbar

The soundbar offers multiple connectivity options:

• HDMI (ARC): For the best audio quality and control, connect an HDMI cable from the soundbar's HDMI ARC port to your TV's HDMI ARC port. This allows your TV remote to control the soundbar's volume.
• Optical In: Connect the included optical cable from the soundbar's OPTICAL IN port to your TV's optical digital audio output.
• AUX: Use a 3.5mm audio cable (not included) to connect the soundbar's AUX port to your TV's headphone jack or audio output.
• USB: Insert a USB drive with audio files into the USB port for direct playback.

Image: A close-up view of the soundbar's rear panel, highlighting the HDMI (ARC), Optical In, USB, and AUX ports, along with a remote control and the wireless subwoofer.

3. Power Connection

1. Connect the power adapter to the DC IN port on the soundbar.
2. Plug the power adapter into a wall outlet.
3. Connect the power cable of the wireless subwoofer to a wall outlet. The subwoofer will automatically pair with the soundbar when both are powered on.

Operating Instructions

1. Power On/Off

Press the Power button on the remote control or on the soundbar to turn the system on or off.

2. Input Selection

Press the "Input" or "Source" button on the remote control or on the soundbar to cycle through available input modes (HDMI ARC, Optical, AUX, USB, Bluetooth).

3. Volume Control

Use the Volume Up (+) and Volume Down (-) buttons on the remote control or on the soundbar to adjust the master volume.

4. Bass and Treble Adjustment

Use the dedicated Bass and Treble buttons on the remote control to fine-tune the audio output to your preference.

5. Bluetooth Pairing

1. Select Bluetooth mode on the soundbar. The LED indicator will flash, indicating it's in pairing mode.
2. On your mobile device, enable Bluetooth and search for "Volkano Supersonic".
3. Select the soundbar from the list of available devices to pair. Once connected, the LED indicator will stop flashing.
4. The Bluetooth range is approximately 15 meters (49 feet).

Image: The Volkano soundbar displaying its Bluetooth 5.0 capability and a remote control, illustrating wireless connectivity and control features.

Maintenance

To ensure the longevity and optimal performance of your Volkano X Supersonic Soundbar System, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar and subwoofer. Do not use liquid cleaners or abrasive chemicals.
• Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight.
• Ventilation: Ensure that the ventilation openings are not blocked.

Troubleshooting

Specifications

• Model Name: Volkano X Supersonic Series
• Model Number: VK-3911-2.1
• Speaker Type: Soundbar with Wireless Subwoofer
• Total Output Power: 200W (RMS)
• Connectivity: Bluetooth 5.0, HDMI (ARC), Optical In, AUX, USB
• Bluetooth Range: Up to 15 meters (49 feet)
• Color: Black
• Product Dimensions (Soundbar): 100.3W x 40.5D x 30H cm (approximate, based on package dimensions and general soundbar size)
• Package Dimensions: 100.3 x 100.3 x 11.5 cm
• Weight: 600 g (package weight, actual product weight will vary)

Warranty and Support

This Volkano product is covered by a 1-Year Limited Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or further assistance, please contact Volkano customer support via the official Volkano Page. Your satisfaction matters to us.

You can extend your coverage: This Volkano Product is covered by a 12-Month Limited Coverage. Register to get an additional 12-Month extension, for a total of 24 Months coverage by Volkano.

For more information, visit: www.volkano.com