FEITON 110CFM
FEITON 110CFM Bathroom Exhaust Fan with LED Light User Manual
Model: 110CFM
1. Introduction
Thank you for choosing the FEITON 110CFM Bathroom Exhaust Fan with LED Light. This manual provides essential information for the safe installation, operation, and maintenance of your new exhaust fan. Please read this manual thoroughly before installation and keep it for future reference.
Image 1: FEITON 110CFM Bathroom Exhaust Fan with LED Light.
This unit is designed to effectively remove moisture and odors from bathrooms, showers, restrooms, living rooms, and offices, while providing integrated LED lighting. It features a quiet operation and durable construction for long-lasting performance.
Image 2: Examples of the FEITON exhaust fan installed in various room types, including bathrooms, showers, offices, and living rooms.
2. Important Safety Instructions
- Always disconnect power at the service panel before installing or servicing the unit.
- All wiring must be performed by a qualified electrician in accordance with all applicable electrical codes and standards.
- Ensure the power supply voltage matches the fan's rating (110-220V).
- Do not install this fan in areas with high temperature, excessive lampblack, or steam beyond typical bathroom conditions.
- Wear safety glasses and gloves during installation.
- Ensure proper grounding to prevent electrical shock.
- This unit is designed for ceiling installation only.
3. Package Contents
Verify that all components are present before beginning installation:
- FEITON 110CFM Exhaust Fan with LED Light
- Installation Hardware (screws, buckles)
- Junction Box (pre-attached to wiring)
- User Manual (this document)
4. Product Specifications
| Feature | Specification |
|---|---|
| Model | 110CFM |
| Power Consumption | 30 W |
| Voltage | 110-220 V |
| Air Flow Capacity | 110 CFM |
| Noise Level | 1.0 Sones |
| Duct Diameter | 4.0 inches |
| Panel Dimensions | 10 x 10 inches (approx. 9.8 x 9.8 inches) |
| Mounting Hole Dimensions | 8 x 8 inches (approx. 7.8 x 7.8 inches) |
| LED Light Power | 15 W |
| LED Light Color Temperature | 6500K |
| Certifications | CE, UL |
Image 3: Product Dimensions. Panel: 9.8x9.8 inches, Mounting Hole: 7.8x7.8 inches, Duct Diameter: 4 inches.
5. Installation Instructions
Important: Installation should be performed by a qualified electrician. Ensure power is disconnected before proceeding.
- Prepare the Mounting Area:
Identify the desired location for the fan. Ensure there is sufficient space in the ceiling for the fan housing and ductwork. The required mounting hole size is approximately 8 x 8 inches (7.8 x 7.8 inches). Refer to Image 3 for detailed dimensions.
- Cut the Ceiling Opening:
Carefully cut an opening in the ceiling according to the specified mounting hole dimensions (approx. 7.8 x 7.8 inches).
- Connect Ductwork:
Attach a 4-inch diameter duct to the fan's exhaust port. Secure it with appropriate duct clamps or tape to ensure an airtight seal. Route the duct to an exterior vent cap.
- Electrical Wiring:
The fan comes with a pre-attached junction box for safer and more convenient wiring. Connect the household electrical wires to the fan's wires inside the junction box. The fan and light can be wired to operate individually or together, depending on your switch configuration. Refer to the wiring diagram below. Ensure all connections are secure and insulated.
Image 4: Electrical Wiring Diagram. Consult a professional electrician for proper connection.
- Blue Line: Master phase
- Black Line: Sterling line
- Red Line: Light connection
- Green Line: Ground connection
The light wire can be connected to a separate switch for independent operation from the fan.
- Mount the Fan:
Insert the fan housing into the ceiling opening. The product is fixed by a combination of screws and buckles for firm fixation. Secure the fan to the ceiling joists or framing using appropriate screws and the provided buckle design. This design allows for simple installation and convenient disassembly for cleaning and maintenance.
Image 5: Product Details, showing the buckle design for secure installation.
- Restore Power and Test:
Once installation is complete and all connections are secure, restore power at the service panel and test the fan and light functions.
6. Operation
The FEITON 110CFM Exhaust Fan with LED Light is designed for straightforward operation.
- Fan Operation: Turn on the wall switch connected to the fan to activate the exhaust fan. The fan will begin to remove moisture and odors from the room.
- Light Operation: If wired separately, turn on the wall switch connected to the LED light to illuminate the area. The 6500K LED light provides bright, clear illumination.
- Combined Operation: If wired to a single switch, both the fan and light will activate simultaneously.
The fan operates quietly at 1.0 Sones while providing strong suction (110 CFM) to maintain air quality.
7. Maintenance
Regular cleaning and maintenance will ensure optimal performance and extend the life of your exhaust fan.
- Disconnect Power: Always turn off power at the circuit breaker before performing any maintenance.
- Clean the Grille/Panel: The exterior grille and light panel can be wiped clean with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean Fan Blades: Periodically, the fan blades may accumulate dust. The buckle design allows for convenient disassembly for cleaning. Carefully remove the panel and gently clean the fan blades with a soft brush or cloth. Ensure no moisture enters the motor housing.
- Check Ductwork: Inspect the ductwork periodically for any obstructions or leaks. Ensure the anti-mosquito check valve (refer to Image 5) is free from debris to allow proper airflow.
- Reassemble: After cleaning, reassemble all components securely and restore power.
8. Troubleshooting
If you encounter issues with your FEITON exhaust fan, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | No power, loose wiring, faulty switch. | Check circuit breaker. Verify all electrical connections are secure. Test the wall switch. |
| Light does not turn on. | No power to light, loose wiring, faulty LED. | Check circuit breaker. Verify light wiring connections. If LED is faulty, contact support. |
| Fan is excessively noisy. | Loose mounting, debris in fan blades, motor issue. | Ensure fan is securely mounted. Disconnect power and clean fan blades. If noise persists, contact support. |
| Poor air extraction. | Obstructed ductwork, fan blades dirty, check valve stuck. | Check ductwork for blockages. Clean fan blades. Ensure anti-mosquito check valve moves freely. |
If troubleshooting steps do not resolve the issue, please contact FEITON customer support.
9. Warranty Information
The FEITON 110CFM Bathroom Exhaust Fan with LED Light is covered by a 3-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage resulting from improper installation, misuse, abuse, accident, unauthorized repair, or modification. Proof of purchase is required for all warranty claims.
10. Customer Support
For any questions, technical assistance, or warranty claims, please contact FEITON customer support via email. Please have your product model and purchase date available when contacting support.
Email: support@feiton.com
We are committed to providing high-quality products and excellent customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.