BROLEO BROLEO72z4t3oqsf

BROLEO Camera Shutter Control Cable User Manual

Model: BROLEO72z4t3oqsf

1. Introduction

This manual provides instructions for the BROLEO Camera Shutter Control Cable, designed to offer stable and synchronized shooting for compatible Fujifilm cameras. Please read this manual carefully before use to ensure proper operation and longevity of the product.

2. Safety Information

  • Keep the cable away from water and moisture to prevent damage.
  • Avoid exposing the cable to extreme temperatures.
  • Do not attempt to disassemble or modify the cable, as this may void the warranty and cause damage.
  • Handle the cable and connectors gently to prevent bending or breaking pins.

3. Package Contents

  • 1 x BROLEO Camera Shutter Control Cable

4. Setup

Follow these steps to connect the shutter control cable to your camera:

  1. Locate the remote shutter release port on your compatible Fujifilm camera. This port typically accommodates a 2.5mm plug.
  2. Carefully insert the 2.5mm plug of the BROLEO shutter control cable into the camera's remote shutter release port. Ensure a secure connection.
  3. The cable is now ready for use.
BROLEO Camera Shutter Control Cable with 2.5mm plug

Image 1: The BROLEO shutter control cable, showing the remote controller and the 2.5mm jack connector for the camera.

5. Operating Instructions

The BROLEO Camera Shutter Control Cable provides two primary functions:

  • Single Shot: Press the button on the remote control to trigger the camera's shutter for a single photograph.
  • Long Exposure/Continuous Shooting: For long exposure or continuous shooting modes (if supported by your camera), press and slide the button to the 'HOLD' position. This will keep the shutter open or trigger continuous shots until the button is released from the 'HOLD' position.
Close-up of the BROLEO shutter control button with HOLD switch

Image 2: A close-up view of the remote controller's button and the 'HOLD' switch, indicating its functionality for extended shutter activation.

6. Maintenance

  • Clean the cable and controller with a soft, dry cloth. Do not use liquid cleaners.
  • Store the cable in a cool, dry place when not in use.
  • Avoid tangling the cable to prevent internal wire damage.

7. Troubleshooting

  • Cable not triggering shutter:
    • Ensure the cable is fully and correctly inserted into the camera's remote port.
    • Verify that your camera model is listed as compatible.
    • Check camera settings to ensure remote control functionality is enabled, if applicable.
  • Intermittent connection:
    • Inspect the cable and connectors for any visible damage or debris.
    • Ensure the connection to the camera is stable and not loose.

8. Specifications

BrandBROLEO
Model NumberBROLEO72z4t3oqsf
MaterialsMetal, Plastic
Cable LengthApproximately 80 cm (0.8 meters)
Camera Plug Size2.5 mm
Compatible CamerasFujifilm GFX50s, X PRO2, X T10, X T100, X A5, X A10, X T3, X S10, X T20, X H1, and other compatible models.
Package Dimensions16 x 5 x 2 cm
BROLEO Camera Shutter Control Cable, overall view

Image 3: An overall view of the BROLEO Camera Shutter Control Cable, highlighting its compact design.

9. Warranty and Support

For warranty information or technical support, please refer to the retailer or contact the manufacturer directly. Specific warranty details may vary by region and point of purchase. Please retain your proof of purchase for any warranty claims.