Polar Aurora PP1144
Polar Aurora Wooden Large Hamster Cage (Model PP1144) Instruction Manual
Comprehensive guide for assembly, operation, and maintenance.
Introduction
Thank you for choosing the Polar Aurora Wooden Large Hamster Cage, Model PP1144. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new hamster habitat. Please read these instructions carefully before beginning assembly and retain them for future reference.
Important Safety Information
- Always supervise children around the hamster cage.
- Ensure all parts are securely fastened before placing any animals inside.
- Keep the cage away from direct sunlight, drafts, and extreme temperatures.
- Regularly inspect the cage for any damage or loose parts that could harm your pet.
- This cage is designed for small animals such as Syrian hamsters, dwarf hamsters, teddy bear hamsters, and gerbils.
- Note: Before assembly, carefully cut along the edge of the protective film on acrylic panels with a knife, then peel the film off.
Package Contents
Please verify that all components are present before starting assembly.
- Wooden frame panels
- Acrylic sheets
- Nesting box
- Ramp
- Assembly hardware (screws, hinges, etc.)
- Instruction manual
Setup and Assembly
Follow these steps to assemble your Polar Aurora Hamster Cage. It is recommended to have a clean, flat surface for assembly.
Step 1: Prepare Acrylic Panels
Before attaching the acrylic panels, locate the protective film on both sides of each panel. Use a knife to carefully score along the edges of the wood frame where the acrylic will sit, then peel off the film. This ensures clear visibility and proper fit.
Step 2: Assemble the Base Frame
Connect the wooden side panels to the bottom panel using the provided hardware. Ensure all connections are snug but do not overtighten.
Step 3: Install Acrylic Sides
Slide the prepared acrylic sheets into the designated grooves on the wooden frame. Secure them in place according to the assembly diagrams.
Step 4: Attach the Top Cover
Attach the top cover assembly to the main cage structure using the hinges. The top cover is designed to open for easy access and cleaning.

Figure 1: Fully assembled Polar Aurora Wooden Large Hamster Cage, showcasing its wooden frame and clear acrylic panels.

Figure 2: The spacious interior of the hamster cage, ready for bedding and accessories, highlighting its DIY potential.
Video 1: A demonstration of the Polar Aurora Wooden Large Hamster Cage, showing its overall design and features.
Step 5: Arrange Interior Accessories
Place the nesting box and ramp inside the cage as desired. The large space allows for various arrangements of hamster hideouts, sand bath areas, and wheels.
Operating Instructions
Opening and Closing the Top Cover
The cage features a multi-angle support top cover for convenient access. To open, gently lift the top cover. It can be propped open at various angles for feeding, cleaning, or interacting with your pet. To close, carefully lower the cover until it rests securely on the frame.

Figure 3: The top cover of the cage shown in an open position, illustrating easy access for maintenance and interaction.

Figure 4: Detailed view of the multi-angle support system for the top cover, allowing it to remain open for convenience.
Ventilation
The top cover includes aesthetic vents designed to provide adequate airflow and deodorization within the habitat, ensuring a healthy environment for your pet.

Figure 5: An overview of the cage, pointing out the vents for air circulation and the durable acrylic material.

Figure 6: A detailed image showing the aesthetic vents on the top cover and the sturdy lumber construction.
Maintenance
Cleaning the Cage
Regular cleaning is crucial for your pet's health. The openable top cover facilitates easy access for cleaning. Remove all bedding and accessories. Wipe down the acrylic panels and wooden surfaces with a pet-safe cleaner. Ensure the cage is completely dry before adding fresh bedding and returning your pet.
Important: Wood can absorb urine. Consider using cage liners or waterproof mats at the bottom to protect the wood and simplify cleaning.
Material Care
- The New Zealand-degreased thick wooden boards are designed for durability. Avoid harsh chemicals that could damage the wood finish.
- The acrylic sheets are high-definition and transparent, with good weathering and impact resistance. Clean with a soft cloth and mild soap or acrylic cleaner to prevent scratches and maintain clarity.
Troubleshooting
- Difficulty peeling off protective film: Use a sharp utility knife to carefully score along the edges of the acrylic where it meets the wood frame. This helps to separate the film cleanly from the panel.
- Pre-drilled holes not aligning: While assembly is generally straightforward, minor misalignments can occur. If holes for accessories like the nesting box or ramp do not perfectly align, slight adjustments or careful re-drilling may be necessary. Ensure not to damage the main cage structure.
- Wood staining from urine: To prevent urine stains on the wooden base, it is highly recommended to use a waterproof liner or tile at the bottom of the cage. This protects the wood and makes cleaning significantly easier.
- Poor ventilation: The cage is designed with aesthetic vents. If you experience insufficient airflow, ensure the cage is not placed in an enclosed space and that the vents are not obstructed. For tropical climates or high humidity, consider modifying the lid with wire mesh for increased ventilation, as suggested by some users.
Specifications
| Feature | Detail |
|---|---|
| Model Name | PP1144 |
| Brand | Polar Aurora |
| Dimensions (L x W x H) | 39.3" x 19.6" x 19.6" (100 cm x 50 cm x 50 cm) |
| Item Weight | 23.1 Pounds (10.5 kg) |
| Material | Acrylic, Pine Wood |
| Color | Wood |
| Included Components | Nesting Box, Ramp |
| Target Audience | Small Animals (Syrian hamsters, dwarf hamsters, teddy bear hamsters, gerbils) |
| Special Features | Adjustable, Comfortable, Durable, Easy Assembly, Odor Resistant, Multi-angle Supportable Cover, HD Transparent Acrylic |
Warranty Information
This Polar Aurora Hamster Cage comes with a 3-month manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, neglect, accidents, or unauthorized modifications.
Customer Support
For any questions, concerns, or assistance with your Polar Aurora Hamster Cage, please contact our customer service. We provide 24-hour customer service to ensure a satisfactory experience.
Please refer to your purchase documentation for specific contact details or visit the official Polar Aurora store page on Amazon for support options.
Online Store: Polar Aurora Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.