Dickie Toys Tornado Drift RC Car Instruction Manual

Introduction

Thank you for choosing the Dickie Toys Tornado Drift RC Car. This manual provides essential information for the safe and optimal operation, maintenance, and troubleshooting of your new remote control vehicle. Please read these instructions carefully before use and retain them for future reference. This product is recommended for ages 6 years and up.

What's in the Box

Verify that all components are present in the packaging:

• 1 x Dickie Toys Tornado Drift RC Car
• 1 x 2-Channel Remote Control (2.4 GHz)
• 1 x Rechargeable Battery for RC Car
• 1 x USB Charging Cable
• 2 x AA Batteries (for Remote Control)
• 2 x Play Pylons (Orange Cones)

The retail packaging for the Dickie Toys Tornado Drift RC Car, displaying the car, remote control, and indicating included batteries and USB charging.

Setup

1. Battery Installation

For the RC Car:

1. Locate the battery compartment on the underside of the RC car.
2. Open the compartment cover.
3. Insert the rechargeable battery, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

For the Remote Control:

1. Locate the battery compartment on the back of the remote control.
2. Open the compartment cover.
3. Insert the 2 AA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

2. Charging the RC Car Battery

The RC car uses a rechargeable battery. Before first use, fully charge the battery.

1. Connect the USB charging cable to the charging port on the RC car.
2. Plug the other end of the USB charging cable into a standard USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light (if present) will show the charging status.
4. Charging typically takes approximately 60 minutes. Do not overcharge.
5. Once charging is complete, disconnect the USB cable from both the car and the power source.

The Tornado Drift RC Car connected via its USB charging cable, illustrating its charging method. This image also indicates a top speed of 10 km/h, 60 minutes USB charging time, and 20 minutes driving time, with included batteries.

Operating Instructions

1. Powering On/Off

• Turn on the RC car using the power switch located on its chassis.
• Turn on the remote control using its power switch.
• The car and remote will automatically pair. An indicator light on both devices will confirm successful pairing.
• To turn off, switch off both the remote control and the RC car.

2. Driving Controls

The remote control features a 2-channel 2.4 GHz system, allowing for precise control and simultaneous play with up to 16 vehicles without interference.

• Forward/Backward: Use the throttle trigger/lever on the remote control.
• Left/Right: Use the steering wheel/knob on the remote control.

3. Drift Function

The Tornado Drift RC Car is designed for exciting drift maneuvers. Practice your drifting skills using the included play pylons.

• To initiate a drift, accelerate and then quickly turn the steering wheel while maintaining throttle. Experiment with different speeds and turning angles.
• The 4-wheel drive system assists in controlled drifting.

Multiple Tornado Drift RC Cars shown in motion, demonstrating the drift function and the use of the included cones for stunt practice. The car features 4-wheel drive and underbody lighting.

4. Ground Lighting

The RC car features red lights on its underside, providing an eye-catching ground lighting effect during operation.

• The ground lighting activates automatically when the car is powered on.

The Tornado Drift RC Car illuminated by its red underbody lights, showcasing the ground lighting feature in a low-light environment, with two orange cones nearby.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the car and remote control. Do not use water or chemical cleaners, as this can damage electronic components.
• Storage: When not in use for extended periods, remove all batteries from both the car and the remote control. Store the product in a cool, dry place away from direct sunlight.
• Battery Care: Always ensure the rechargeable battery is fully charged before storage to prolong its lifespan. Do not leave batteries discharged for long periods.

Troubleshooting

Specifications

• Model Number: 201104007
• Scale: 1:24
• Length: 22 cm (8.66 inches)
• Product Dimensions: 11.02 x 6.89 x 6.5 inches
• Item Weight: 1.1 pounds
• Recommended Age: 6 years and up
• Max Speed: Up to 10 km/h
• Frequency: 2.4 GHz (supports up to 16 vehicles)
• Car Battery: Rechargeable (included)
• Remote Control Batteries: 2 x AA (included)
• Charging Time: Approximately 60 minutes via USB
• Driving Time: Approximately 20 minutes
• Features: 4-wheel drive, drift function, ground lighting, sleep mode

Safety Information

• Choking Hazard: Small parts. Not for children under 3 years.
• Adult Supervision: Always ensure adult supervision during operation, especially for younger children.
• Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. Remove exhausted batteries from the product.
• Operating Environment: Do not operate the RC car near water, heat sources, or in hazardous areas. Avoid driving on public roads or near pedestrians.
• Impacts: Avoid collisions with hard surfaces or objects, as this may damage the vehicle.

Warranty and Support

Dickie Toys products are manufactured to high-quality standards. If you encounter any issues or require assistance with your Tornado Drift RC Car, please refer to the troubleshooting section of this manual. For further support, please contact Dickie Toys customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.