Atlas Sound GST-G Garden Speaker Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Atlas Sound GST-G Garden Speaker. The GST-G is designed for outdoor sound reinforcement in landscaped areas, offering high-quality audio with a durable, weather-resistant construction.

Key features of this speaker include an 8-inch coaxial polypropylene/Kevlar cone woofer and a 0.5-inch Mylar dome tweeter, providing clear audio reproduction. Its down-firing design ensures a 360-degree horizontal sound dispersion and protects internal components from environmental elements. The robust polyethylene enclosure and triple-layer grille enhance its longevity in various climates.

2. Safety Information

• Electrical Safety: Installation should be performed by qualified personnel. Ensure all wiring complies with local electrical codes. Disconnect power before making any connections or performing maintenance.
• Outdoor Use: This speaker is designed for outdoor use. Ensure all connections are waterproofed and protected from moisture to prevent electrical hazards.
• Placement: Install the speaker in a stable location to prevent tipping. Ensure the deep base is properly buried as intended for stability and optimal performance.
• Temperature: Avoid installing the speaker in areas subject to extreme temperatures outside its operational range.
• Cleaning: Use only a soft, damp cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.

3. Package Contents

Verify that all items are present in the package:

• Atlas Sound GST-G Garden Speaker (1 unit)
• Instruction Manual (this document)
• Note: Additional mounting hardware or wiring may be required and is sold separately.

4. Setup and Installation

The GST-G Garden Speaker is designed for in-landscape burial of its deep base, ensuring stability and a discreet appearance.

1. Site Selection: Choose a location in your landscaped area where the speaker can be heard but remain visually unobtrusive. Ensure the ground is stable and allows for proper drainage.
2. Excavation: Dig a hole sufficient to accommodate the deep base of the speaker. The base is intended for burial to provide stability.
3. Wiring: This speaker operates on a 70V constant voltage system. Connect the speaker to your 70V amplifier using appropriate outdoor-rated speaker wire. The speaker features multiple power taps (8W, 16W, 32W) for adjusting output power. Select the desired tap setting before final installation. Ensure all wire connections are secure and protected from moisture.
4. Placement: Carefully place the speaker into the excavated hole, ensuring it is level and stable. Backfill the hole, compacting the soil around the base for maximum stability.
5. Final Check: Before powering on, double-check all connections and ensure the speaker is securely installed.

Figure 1: Speaker Base for Installation. This image displays the base of the GST-G Garden Speaker, illustrating the design for secure installation and internal component access.

Figure 2: Speaker Dimensions. This image provides a visual representation of the GST-G Garden Speaker, including its overall dimensions to assist with planning installation space.

5. Operating Instructions

Once properly installed and connected to a 70V amplifier, the Atlas Sound GST-G Garden Speaker operates automatically with your audio system.

• Power On/Off: The speaker will power on and off with your connected 70V amplifier.
• Volume Control: Adjust the volume through your 70V amplifier. The selected power tap on the speaker determines its maximum output level.
• Sound Dispersion: The speaker's down-firing design provides a 360-degree horizontal sound dispersion pattern, ensuring even sound coverage in its vicinity.

6. Maintenance

The Atlas Sound GST-G Garden Speaker is designed for minimal maintenance due to its durable construction.

• Cleaning: Periodically wipe the exterior of the speaker with a soft, damp cloth to remove dirt or debris. Do not use high-pressure water or harsh cleaning agents.
• Grille Inspection: The triple-layer grille protects the drivers. Occasionally inspect the grille for any obstructions or damage.
• Environmental Protection: The down-firing arrangement helps prevent dust and condensation from affecting the drivers. No special internal cleaning is typically required.
• Enclosure Durability: The stable polyethylene enclosure is resistant to environmental factors. Avoid physical impact that could damage the enclosure.

7. Troubleshooting

If you experience issues with your GST-G Garden Speaker, refer to the following common troubleshooting steps:

• No Sound:
  • Ensure the 70V amplifier is powered on and functioning correctly.
  • Check all wiring connections between the amplifier and the speaker for looseness or damage.
  • Verify the correct power tap setting on the speaker.
  • Confirm the audio source is active and sending a signal to the amplifier.
• Distorted Sound:
  • Reduce the volume level on your amplifier. Overdriving the speaker can cause distortion.
  • Check for damaged wiring or loose connections.
  • Ensure the speaker's power tap setting is appropriate for the amplifier's output.
• Uneven Sound Coverage:
  • While the speaker offers 360-degree dispersion, ensure no large obstructions are directly blocking the sound path.
  • Consider adding more speakers for larger or irregularly shaped areas.

If problems persist after following these steps, contact customer support.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official AtlasIED website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Manufacturer: AtlasIED