Kemei KM-5082 Professional Cordless Hair Clipper User Manual

1. Important Safety Instructions

To ensure safe operation and prevent injury or damage, please read all instructions carefully before using the Kemei KM-5082 hair clipper. Keep this manual for future reference.

• Water Exposure: Do not use this appliance near water, in a bathtub, shower, or over a basin filled with water. If the appliance falls into water, do not reach for it. Unplug immediately.
• Children: This appliance is not intended for use by infants or young children. Keep the device out of reach of children.
• Power Source: Use only the charger supplied with the appliance. Ensure the voltage specified on the charger matches your local power supply.
• Damage: Do not operate the appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Maintenance: Refer to the "Maintenance and Cleaning" section for proper cleaning procedures. Do not attempt to repair the appliance yourself. Contact qualified service personnel.
• Blades: Handle blades with care. Ensure blades are properly installed before use. Do not use if blades are damaged or bent.

2. Product Overview

The Kemei KM-5082 is a professional cordless hair clipper designed for precise and comfortable grooming. It features durable stainless steel blades, a clear LCD display, and a rechargeable battery for convenient use.

2.1 Package Contents

• Kemei KM-5082 Hair Clipper
• Charging Base
• Power Adapter
• Cleaning Brush
• Lubricating Oil
• Attachment Combs (various sizes)
• User Manual

2.2 Component Identification

Figure 1: Kemei KM-5082 Hair Clipper Components. This image shows the main parts of the hair clipper, including the movable knife adjusting lever, power switch, LCD display, and charging base.

• Movable Knife Adjusting Lever: Used to fine-tune cutting length.
• Powder Metallurgy Cutter Head: High-quality blades for precise cutting.
• Power Switch: Turns the clipper on and off.
• LCD Display: Shows battery percentage, speed mode, and charging status.
• Charging Base: Docking station for charging the clipper.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge the hair clipper for approximately 3 hours. This ensures optimal battery performance and longevity.

1. Connect the power adapter to the charging base.
2. Place the hair clipper onto the charging base, ensuring it is seated correctly.
3. Plug the power adapter into a suitable electrical outlet.
4. The LCD display will show the charging status and battery percentage.
5. Once fully charged, the display will indicate 100%. Unplug the charger.

Figure 2: Hair Clipper on Charging Base. The clipper is shown securely placed on its charging base, ready for charging.

3.2 Attaching Guide Combs

Select the desired guide comb for your preferred hair length. Align the comb with the clipper blade and push it firmly until it clicks into place.

4. Operating Instructions

4.1 Powering On/Off

Press the power switch located on the side of the clipper to turn the device on or off.

4.2 Adjusting Cutting Length

The Kemei KM-5082 features a movable knife adjusting lever for precise cutting length adjustments, even without guide combs. This allows for fine-tuning from 0.2mm to 0.5mm.

Figure 3: Blade Adjustment. This image illustrates the movable knife adjusting lever for precise cutting lengths, ranging from 0.2mm to 0.5mm.

For longer lengths, attach the appropriate guide comb. The lever can still be used to make minor adjustments within the comb's range.

4.3 Two-Speed Operation

The clipper offers two operating speeds for different hair types and cutting needs. The LCD display will indicate the current speed mode (e.g., "T" for Turbo mode).

Figure 4: LCD Display. The display shows battery percentage, speed setting (e.g., Turbo), and a charging reminder icon.

To switch between speeds, press the power button briefly while the clipper is on. The display will update to reflect the selected speed.

4.4 Hair Cutting Tips

• Ensure hair is clean and dry before cutting.
• Start with a longer guide comb and gradually reduce the length if desired.
• Move the clipper against the direction of hair growth for an even cut.
• Use smooth, overlapping strokes.
• For detailing, remove the guide comb and use the adjustable blade for precise lines.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Kemei KM-5082 hair clipper.

1. Turn Off and Unplug: Always ensure the clipper is turned off and unplugged from the charging base before cleaning.
2. Remove Guide Comb: Detach any guide comb attached to the clipper.
3. Clean Blades: Use the provided cleaning brush to remove loose hair from the blades. For thorough cleaning, the blade head can be carefully detached (refer to specific instructions if provided in the physical manual for blade removal).
4. Lubricate Blades: After every few uses, apply a small drop of the provided lubricating oil to the blades. Turn the clipper on for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and reduces friction.
5. Clean Body: Wipe the body of the clipper with a soft, damp cloth. Do not use abrasive cleaners or immerse the clipper in water.
6. Storage: Store the clipper in a dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

7. Specifications

• Model: KM-5082
• Brand: Kemei
• Blade Material: Stainless Steel
• Power Source: Battery Operated (Rechargeable)
• Target Audience: Men
• Special Features: Rechargeable, Portable, LCD Display, Two-Speed Operation
• Dimensions: 22.8 x 11.6 x 9.6 cm (Shipping Dimensions)
• Weight: 860 grams (Shipping Weight)

8. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Kemei customer service. You can also visit the official Kemei website for more information.

Official Kemei Website: http://l.ead.me/Kemei