1. Safety Information
Please read these instructions carefully before installation and retain them for future reference. Improper installation or use can lead to electrical shock or fire hazards.
- Electrical Safety: Always turn off the power at the circuit breaker or fuse box before beginning any installation, maintenance, or bulb replacement. If you are unsure about electrical wiring, consult a qualified electrician.
- Product Certification: This fixture is ETL listed and IP65 rated, ensuring safety and suitability for outdoor use in wet locations.
- Bulb Requirements: Use only E26 base bulbs, such as PAR20, BR20, or A19 types. Do not exceed the maximum wattage of 60W per bulb.
- Damage Inspection: Do not install if the product or any components are damaged. Contact customer support for assistance.
2. What's Included
Verify that all components are present before beginning installation.
- 1 x mirrea 12-inch Outdoor Porch Light Fixture
- 1 x Universal Mounting Bracket
- Mounting Hardware (screws, wire nuts, fixing nuts)
- Instruction Manual
Figure 1: Product Dimensions and ETL Certification Mark.
3. Installation Instructions
Follow these steps for safe and proper installation. Professional installation is recommended if you are not familiar with electrical wiring.
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation location. Turn off the power completely to prevent electrical shock.
- Prepare Mounting Surface: Ensure the wall surface is clean, dry, and structurally sound.
- Install Mounting Bracket: Attach the universal mounting bracket to the junction box on your wall using the provided screws. Ensure the bracket is securely fastened.
- Wiring Connections:
- Connect the black wire from the fixture to the black (Live) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box and the mounting bracket using a wire nut.
Ensure all wire connections are secure and properly insulated with wire nuts.
- Secure Fixture: Carefully align the fixture with the mounting bracket. Secure the fixture to the mounting bracket using the provided fixing nuts on the wall plate front side.
- Install Bulbs: Insert two E26 base bulbs (PAR20, BR20, or A19, max 60W each) into the sockets at the top and bottom of the fixture.
- Restore Power: Turn the power back on at the circuit breaker. Test the light fixture to ensure it functions correctly.
Figure 2: Detail of the mounting mechanism on the back of the fixture.
Figure 3: View of the bulb compartment with tempered glass cover.
4. Operating Instructions
The mirrea outdoor porch light is designed for simple operation.
- Power On/Off: Control the light fixture using your standard wall switch.
- Dimming Functionality: This fixture is compatible with dimmer switches and dimmable E26 bulbs (not included). To utilize dimming, ensure both your wall switch and installed bulbs are dimmable. Adjust the dimmer switch to achieve your desired light intensity.
Figure 4: Light fixture in illuminated and off states.
5. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your light fixture.
- Cleaning: To clean the fixture, ensure the power is off. Wipe the exterior with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the finish or glass.
- Bulb Replacement: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E26 base bulbs, not exceeding 60W per bulb.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the tempered glass covers are securely in place to prevent bug and moisture ingress.
Video 1: Overview of the mirrea Modern Outdoor Porch Light, demonstrating its design and features.
6. Troubleshooting
If you encounter issues with your light fixture, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty bulb; Faulty switch | Check circuit breaker/fuse; Verify wire connections; Replace bulb; Test/replace switch |
| Light flickers or is dim | Loose bulb; Incorrect bulb type; Dimmer incompatibility; Loose wiring | Tighten bulb; Ensure bulb is dimmable if using a dimmer; Check dimmer switch compatibility; Verify wire connections |
| Water or bugs inside fixture | Improperly sealed glass covers; Damaged seals | Ensure glass covers are securely closed; Inspect and replace seals if damaged |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | mirrea |
| Model Number | BH004 |
| Dimensions (L x W x H) | 7.17" x 4.53" x 11.61" (18.2cm x 11.5cm x 29.5cm) |
| Color | Matte Black |
| Material | Aluminum, Tempered Glass |
| Power Source | AC |
| Voltage | 120 volts |
| Wattage | Max 120 watts (60W per bulb) |
| Number of Light Sources | 2 |
| Bulb Base | E26 |
| Light Source Compatibility | Incandescent, CFL, LED |
| Special Features | Dimmable, Waterproof (IP65) |
| Indoor/Outdoor Usage | Outdoor |
| Certification | ETL, cETL Listed |
8. Warranty and Support
mirrea provides a one-year warranty from the date of purchase for this product. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Mirrea Home customer service. Please have your purchase information and model number (BH004) ready when contacting support.
Contact Information: Refer to your purchase platform or the official mirrea website for the most current customer support contact details.