1. Product Overview
The Stylrtop Smart Camera Lock P150C is an advanced 3-in-1 security solution integrating a smart lock, doorbell, and video intercom. It offers keyless entry with multiple unlocking methods and enhanced monitoring capabilities for residential and commercial front doors.
Key Features:
- 3-in-1 Functionality: Combines smart lock, doorbell, and 1080P HD camera with built-in Wi-Fi.
- Multiple Unlocking Methods: User codes, fingerprints, app remote control, Alexa voice control, and physical key.
- Two-Way Intercom: Communicate with visitors directly from your smartphone.
- Real-time Monitoring: Check your door's status anytime, anywhere.
- Emergency Power: Features a USB port for emergency power.
- Enhanced Security: Personal access codes stored locally on encryption chips; living human fingerprint recognition.
Image: Stylrtop Smart Camera Lock P150C with its accompanying mobile app interface.
Image: Visual representation of the lock's integrated 3-in-1 features.
2. Packing List
Please ensure all components are present before beginning installation:
- Exterior Assembly (Front Panel with Keypad/Camera)
- Interior Assembly (Rear Panel with Thumbturn)
- Mounting Plate
- Lithium Battery
- Keys (Physical)
- Plug (for interior assembly)
- Double-sided Tape Mounting Plate
- Deadbolt Latch
- Strike Plate and Box
- Screws (various sizes: A, B, C, D, E, F)
- User Manual
- Service Card
3. Installation Guide
This section provides step-by-step instructions for installing your Stylrtop Smart Camera Lock P150C. For a visual guide, please refer to the installation video below.
3.1. Door Compatibility Check
Before installation, verify your door's dimensions and compatibility:
- Door Thickness: 1⅜'' (35mm) to 2⅛'' (55mm)
- Backset: 2⅜'' (60mm) or 2¾'' (70mm)
- Cross Bore Diameter: 2⅛'' (54mm) or 1½'' (38mm)
- Door Latch Hole: 1'' (26mm)
The lock is compatible with most US standard doors. It is not suitable as a replacement for round latch locks and integrated locks.
Image: Door size and compatibility requirements.
3.2. Step-by-Step Installation
- Install the Latch: Ensure the latch is correctly oriented with 'TOP' facing upwards. Adjust the backset if necessary (60mm or 70mm).
- Install the Exterior Assembly: Route the cable and tailpiece through the latch. Apply double-sided tape to secure the exterior assembly to the door.
- Install the Mounting Plate: Attach the rubber gasket to the mounting plate. Run the wires through the mounting plate and secure it with appropriate screws (B, C, or D based on door thickness).
- Install the Interior Assembly: Adjust the L/R switch on the internal circuit board based on your door's opening direction (R for right-hand, L for left-hand). Wire the cable to the interior assembly and connect the tailpiece. Secure the interior assembly with screws (F).
- Install Battery and Cover: Insert the lithium battery and attach the battery cover.
- Insert the Plug: Place the small plug into the designated hole on the interior assembly.
Installation Video:
Video: Detailed installation guide for the Stylrtop P150C Smart Camera Lock.
4. Operating Instructions
The Stylrtop Smart Camera Lock P150C offers five convenient ways to unlock your door:
Image: Overview of the five unlocking methods.
4.1. Fingerprint Unlock
Place your registered fingerprint on the scanner for quick and secure access. The lock is designed to recognize living human fingerprints only.
4.2. Keypad Code Unlock
Enter your programmed user code on the touchscreen keypad. Personal access codes are stored securely on local encryption chips.
4.3. App Remote Control
Control your lock remotely using the Tuya Smart app. This allows for remote unlocking, monitoring, and managing access logs.
Image: Features of the 2K HD Camera, including remote unlock via app.
4.4. Alexa Voice Control
Integrate your smart lock with Alexa for convenient voice-activated unlocking (requires proper setup through the app).
4.5. Physical Key Unlock
Use the provided physical keys as a traditional backup unlocking method.
4.6. App and Wi-Fi Connection
To connect the lock to the Tuya Smart app and Wi-Fi, follow these steps:
- Activate the keypad by pressing any key.
- Press the menu key and verify administrator access.
- Press number 3 to enter network connection settings.
- Press number 1 to reset Wi-Fi. The LED indicator light will flash.
- Download the Tuya Smart app from your device's app store (iOS/Android).
- In the app, click 'Add Device' and select 'Video Lock (Wi-Fi)' under 'Camera & Lock'.
- Ensure the lock is in Wi-Fi pairing mode (LED flashing).
- Choose your 2.4 GHz Wi-Fi network (5G networks are not compatible) and enter the password.
- Scan the QR code displayed in the app with the lock's camera. You will hear a prompt sound upon successful recognition.
Video: Instructions on how to connect the Stylrtop Smart Camera Lock P150C to the app and Wi-Fi.
Important Note: If the battery level is below 30%, some functions, including video streaming, may not work to ensure the basic functions of the lock are operating properly.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the lock's exterior. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
- Battery Replacement: The lock uses 1 Lithium Ion battery. Replace the battery when you receive low power alerts to ensure continuous operation.
- Firmware Updates: Regularly check the Tuya Smart app for any available firmware updates to ensure optimal performance and security.
- Environmental Conditions: While designed for durability, extreme temperatures or prolonged exposure to harsh weather may affect performance.
6. Troubleshooting
For detailed troubleshooting steps, please refer to the official Troubleshooting Guide PDF available on the product page. Below are some common issues and general advice:
- Lock not responding: Check battery level. Ensure the lock is powered on.
- Fingerprint not recognized: Ensure your finger is clean and dry. Re-register your fingerprint if issues persist.
- Wi-Fi connectivity issues: Ensure your router is 2.4 GHz compatible. Check router load and signal strength. Try resetting the Wi-Fi on the lock as per section 4.6.
- App not connecting: Verify your phone's Wi-Fi connection. Ensure the app is updated to the latest version.
- Doorbell notifications delayed: Check your internet connection speed and stability.
If you encounter persistent issues, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Stylrtop |
| Model Name | P15X C (P150C) |
| Lock Type | Biometric, Deadbolt, Keypad, Fingerprint Wi-Fi Lock with Camera |
| Special Features | WiFi Deadbolt, Fingerprint, 1080 P HD Camera, Auto-Lock, Compatible with Alexa |
| Material | Aluminum |
| Color | Gray |
| Item Dimensions L x W x H | 8 x 7 x 1 inches |
| Item Weight | 2.5 Pounds |
| Power Source | 1 Lithium Ion battery (included) |
| Connectivity Protocol | Wi-Fi (2.4 GHz only) |
| Controller Type | Amazon Alexa, App |
8. Warranty and Support
Stylrtop is committed to providing high-quality products and excellent customer service. We hope the world flourishes and people live in peace. Love life, love family, love yourself.
Warranty:
This product comes with a 1-year money back guarantee following the date of purchase.
Customer Support:
We offer lifetime customer support for your Stylrtop Smart Camera Lock P150C. Please feel free to contact us at any time for assistance.
- North America Support:
Chituo@outlook.com
Support_US@stylrtop.com - Other Areas Support:
Support@stylrtop.com