Favourite Multi-Functional Temperature and Humidity Clock User Manual

1. Introduction

Thank you for choosing the Favourite Multi-Functional Large-Screen Temperature and Humidity Clock. This device is designed to provide accurate time, temperature, and humidity readings on a clear 7-inch curved LED screen. It features dual alarm settings, adjustable brightness, and flexible power options, making it ideal for various environments such as offices, living rooms, and gyms. Please read this manual carefully to ensure proper use and maintenance of your new clock.

2. Key Features

• Clear curved screen mirror display: 7-inch curved large screen displays time, temperature, and humidity on the same screen for excellent readability.
• Two sets of independent alarm clock settings for flexible scheduling.
• Three-level screen brightness setting to suit different lighting conditions.
• Dual power supply methods: Plug-in (DC) and battery (for memory function and temporary use).
• Memory function: Retains settings when powered off if batteries are installed.
• Date switching display and Celsius/Fahrenheit temperature unit switching.
• Snooze mode for additional sleep time.

3. Product Overview

3.1 Front View and Display Elements

Figure 3.1: Front View with Labeled Components

This image highlights the key display elements and their locations on the curved screen. You can see the time display, temperature (in Celsius or Fahrenheit), humidity percentage, and indicators for the two alarm settings. The screen also shows the 12/24 hour switching indicator and the plastic electroplating base.

3.2 Top View and Function Buttons

Figure 3.2: Top View with Button Functions

The top of the clock features all the control buttons. From left to right, these are: MODE (for switching display modes and setting year/month/day), ALARM (for alarm settings and switches), SNZ/LIGHT (snooze and brightness button), UP (adjustment up, brightness level setting), and DOWN (adjustment down, Celsius/Fahrenheit switch).

3.3 Back View and Power Options

Figure 3.3: Back View with Power Inputs

The back of the unit houses the battery compartment, which requires three AA batteries (not included). It also features the DC jack for plug-in power. The device supports dual power use, with batteries providing memory function when plugged in, or temporary power when unplugged (screen turns off automatically to save power).

3.4 Product Dimensions

Figure 3.4: Product Dimensions

The clock measures approximately 17 cm (6.6 inches) in length, 4 cm (1.5 inches) in depth, and 8.5 cm (3.3 inches) in height, making it a compact yet highly visible device.

4. Setup

4.1 Powering the Device

The clock can be powered in two ways:

• DC Plug-in (Recommended for continuous display): Connect the provided DC power cable to the DC jack at the back of the clock and plug the other end into a suitable power adapter (not included) or USB port. The screen will light up continuously.
• Battery Power (for memory and temporary use): Open the battery compartment at the back and insert three AA batteries (not included), ensuring correct polarity. When running on battery power alone, the screen will automatically turn off after a few seconds to conserve energy. Press any button to temporarily light up the screen. If batteries are installed while the device is plugged in, they act as a memory backup, preserving settings during power outages.

5. Operating Instructions

5.1 Setting Time and Date

1. Press the MODE button once to switch between time, date, and temperature/humidity display.
2. To set the time, press and hold the MODE button for three seconds. The hour digit will start flashing.
3. Use the UP and DOWN buttons to adjust the hour.
4. Press MODE again to move to minutes, then adjust with UP/DOWN.
5. Continue pressing MODE to cycle through setting the year, month, and day, adjusting each with UP/DOWN.
6. After setting the day, press MODE one more time to exit the setting mode.
7. To switch between 12-hour and 24-hour format, press the UP button while in normal time display mode.

5.2 Setting Alarms

The clock supports two independent alarm settings (AL1 and AL2).

1. Press the ALARM button once to view AL1, press again to view AL2.
2. To set an alarm, press and hold the ALARM button for three seconds when the desired alarm (AL1 or AL2) is displayed. The hour digit will flash.
3. Use the UP and DOWN buttons to adjust the alarm hour.
4. Press ALARM again to move to minutes, then adjust with UP/DOWN.
5. Press ALARM one more time to exit the alarm setting mode.
6. To enable or disable an alarm, press the ALARM button repeatedly until the desired alarm is displayed, then press UP or DOWN to toggle it ON or OFF. An alarm icon will appear on the screen when enabled.

5.3 Adjusting Screen Brightness

Figure 5.1: Brightness Levels

The clock offers three levels of screen brightness (High, Medium, Low/Off).

• In normal time display mode, press the UP button to cycle through the brightness levels.
• The levels are typically: Bright (100%), Medium (50%), and Off (0%).

5.4 Snooze Function

When an alarm sounds, press the SNZ/LIGHT button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (default snooze time is usually 5 minutes, refer to product specifications for exact duration if available). To turn off the alarm completely, press any other button.

5.5 Switching Temperature Units

To switch between Celsius (°C) and Fahrenheit (°F) temperature display:

• In normal time display mode, press the DOWN button. The temperature unit will toggle between °C and °F.

6. Maintenance

To ensure the longevity and optimal performance of your clock:

• Cleaning: Wipe the screen and body with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or chemical sprays.
• Placement: Place the clock on a stable, flat surface. Avoid direct sunlight, extreme temperatures, and high humidity, as these can affect performance and display clarity.
• Battery Replacement: If using battery power, replace all three AA batteries simultaneously when the display becomes dim or erratic. Dispose of old batteries responsibly.
• Handling: Handle the clock with care. Avoid dropping it or subjecting it to strong impacts.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This product comes with No warranty as per manufacturer specifications. For any operational questions or issues not covered in this manual, please refer to the seller or retailer from whom you purchased the product for further assistance.