Introduction
This manual provides essential instructions for the safe and efficient use of your Bestway Flowclear AquaCrawl Pool Vacuum. Please read all instructions carefully before assembly and operation. Keep this manual for future reference.
The AquaCrawl Pool Vacuum is designed for cleaning above-ground pools up to 15 feet in diameter. It connects to your filter pump for suction and features a removable debris bag for easy cleaning.
Key Features:
- 88-inch length for efficient pool coverage.
- Attaches to filter pumps with flow rates of 530 GPH (2,006 L/h) and above.
- Includes an adapter for use with skimmer-style pumps.
- Removable and reusable debris bag for easy maintenance.
- Two interchangeable nozzles: a standard vacuum head and a brush head.
Package Contents
Verify that all components listed below are present and undamaged before proceeding with assembly.
Image: All components of the Bestway Flowclear AquaCrawl pool vacuum laid out on grass, including the telescopic pole sections, hose, vacuum body, debris bag, standard vacuum head, brush head, and adapters.
- Telescopic Pole (multiple sections)
- Vacuum Body with Debris Bag
- Flexible Vacuum Hose
- Standard Vacuum Head
- Brush Head
- Adapters for Filter Pump Connection
Setup Instructions
- Assemble the Telescopic Pole: Connect the sections of the telescopic pole by aligning the pins and holes until they click into place. Ensure the pole is securely extended to the desired length for your pool depth.
Image: Close-up of hands connecting two sections of the telescopic pole, showing the push-button locking mechanism.
- Attach Vacuum Head: Choose either the standard vacuum head or the brush head and securely attach it to the end of the vacuum body.
Image: Hands attaching the teal brush head to the white and teal AquaCrawl vacuum body.
- Connect Hose to Vacuum: Attach one end of the flexible vacuum hose to the inlet on the vacuum body. Ensure a tight connection to prevent air leaks.
Image: Hands connecting the ribbed vacuum hose to the nozzle of the AquaCrawl vacuum body.
- Connect Hose to Filter Pump: Attach the other end of the vacuum hose to the inlet of your pool's filter pump. Use the appropriate adapter if necessary for skimmer-style pumps. Ensure the filter pump is turned off during connection.
Image: A hand pushing the vacuum hose into a blue inlet fitting on the side of a pool wall, connecting it to the filter pump system.
- Submerge and Prime: Slowly submerge the vacuum head and hose into the pool water to remove all air from the system. Once fully submerged and air-free, turn on your filter pump.
Operating Instructions
With the filter pump running and the vacuum primed, you can begin cleaning your pool.
- Vacuuming Technique: Move the vacuum head slowly and steadily across the bottom of the pool. Overlapping strokes will ensure thorough cleaning. Avoid lifting the vacuum head out of the water during operation to prevent air from entering the system.
- Monitor Debris Bag: Periodically check the debris bag. If it becomes full, suction power will decrease. Turn off the filter pump, remove the vacuum from the pool, and empty the debris bag.
- After Cleaning: Once cleaning is complete, turn off the filter pump. Disconnect the vacuum hose from the pump and the vacuum body. Remove the vacuum from the pool.
Image: A woman standing outside an above-ground pool, using the Bestway Flowclear AquaCrawl pool vacuum with its telescopic pole to clean the pool bottom.
Instructional Video:
Video: An official video demonstrating the assembly and operation of the Bestway Flowclear AquaCrawl Pool Vacuum, showing its features and how it cleans an above-ground pool.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your pool vacuum.
- Rinse After Use: Always rinse the vacuum body, debris bag, hose, and attachments with fresh water after each use to remove chlorine and debris.
- Clean Debris Bag: Regularly empty and clean the reusable debris bag. Ensure it is free of fine particles that could impede water flow.
- Inspect Components: Periodically inspect all components for wear and tear, especially the hose and connections. Replace any damaged parts immediately.
- Storage: Store the pool vacuum in a cool, dry place, protected from direct sunlight and extreme temperatures, when not in use.
Troubleshooting
If you encounter issues with your AquaCrawl Pool Vacuum, consider the following common solutions:
- Low Suction:
- Check if the debris bag is full and needs emptying.
- Ensure all hose connections are tight and there are no air leaks.
- Verify that your filter pump is operating correctly and has sufficient flow rate (530 GPH or higher).
- Ensure the vacuum hose is fully primed and free of air bubbles.
- Vacuum Not Moving Smoothly:
- Check the vacuum head for any obstructions.
- Ensure the pool bottom is free of large debris that could snag the vacuum.
- Hose Collapsing:
- This can occur if the pump's suction is too strong for the hose material or if there's a blockage. Ensure the debris bag is not overly full.
- If using a very powerful pump, consider reducing its flow if possible, or ensure the hose is not kinked.
If problems persist, please refer to the support section or contact Bestway customer service.
Specifications
| Model Name | AquaCrawl |
| Item Model Number | 58212E |
| Brand | Bestway |
| Power Source | Hand Powered (requires filter pump for suction) |
| Hose Length | 7.33 Feet (approx. 88 inches) |
| Material | Plastic |
| Special Feature | Lightweight |
| Control Method | Touch |
| Installation Type | Attachment-based |
| Compatible Pool Size | Above-ground pools up to 15 feet in diameter |
| Required Filter Pump Flow Rate | 530 GPH (2,006 L/h) and above |
| UPC | 821808076963 |
Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please contact Bestway customer service. Keep your proof of purchase and product model number (58212E) handy when contacting support.
You can typically find contact information on the Bestway official website or on the product packaging.
