TAURUSKING Charger for Bosch 14.4V-18V Li-ion Batteries (Model CA-BOS-CH02B) User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your TAURUSKING CA-BOS-CH02B battery charger. This charger is designed for use with Bosch 14.4V-18V Li-ion batteries, offering reliable and quick charging. Please read these instructions carefully before first use and retain them for future reference.

Important Safety Instructions

To reduce the risk of injury, always follow these basic safety precautions:

Charge batteries only within the specified temperature range of 0-40 degrees Celsius (32-104 degrees Fahrenheit).
Operate the charger in a dry environment. Do not expose the charger to moisture or liquids.
Keep the charger's hardware interface clean and free from debris.
Keep the charger and charging batteries away from children. Ensure children do not have access to the power source during charging.
Always remove the battery from the charger and disconnect the charger from the power outlet once charging is complete.
Do not attempt to charge non-rechargeable batteries.
Do not use the charger if the cord or plug is damaged.
Do not disassemble the charger. Refer all servicing to qualified service personnel.

Product Overview

The TAURUSKING CA-BOS-CH02B is a single-bay charger designed for efficient charging of Bosch 14.4V-18V Li-ion batteries. It features smart LED indicators and built-in circuit protections for safe operation.

TAURUSKING CA-BOS-CH02B Battery Charger — Figure 1: Front view of the TAURUSKING CA-BOS-CH02B battery charger, showing the battery slot and power cord.

Features

Compatible with Bosch 14.4V-18V Li-ion batteries.
Smart LED indicator for charging status.
Automatic charging control: Pre-charge, Constant Charge, and Trickle Charge.
Built-in circuit protections against overcharge, overheat, and short circuit.
Input Voltage: 110-240V, suitable for various regions.
Output Current: 1.5A for efficient charging.
Typical charging time of approximately 30 minutes for compatible batteries.

Specifications

Specification	Value
Model Number	CA-BOS-CH02B
Input Voltage	110-240V AC, 50/60Hz
Output Voltage	14.4V-18V DC
Output Current	1.5A
Compatible Battery Type	Bosch 14.4V-18V Li-ion
Compatible Charger Models	AL1860, BC660, 2607225324
Compatible Battery Models	BAT607, BAT609, BAT610, BAT614, BAT618, BAT619
Charging Time	Approx. 30 minutes (for a fully discharged battery)
Product Dimensions	6.69 x 5.91 x 3.94 inches
Item Weight	1.43 pounds (0.65 kg)

Bottom view of TAURUSKING charger with specification label — Figure 2: Bottom view of the charger, displaying the product label with input and output specifications.

Setup

Unpack the Charger: Carefully remove the charger from its packaging. Inspect for any visible damage.
Choose a Location: Place the charger on a stable, flat, and dry surface, away from direct sunlight, heat sources, and moisture. Ensure adequate ventilation around the charger.
Connect to Power: Plug the charger's power cord into a standard 110-240V AC electrical outlet.

TAURUSKING charger with power plug and battery slot visible — Figure 3: The charger ready for use, showing the power plug and the battery insertion slot.

Operating Instructions

Charging a Battery

Ensure the charger is plugged into a live power outlet.
Align your Bosch 14.4V-18V Li-ion battery with the charging slot on the charger.
Slide the battery firmly into the slot until it clicks into place. The charger's indicator light will change to show the charging status.
Once the battery is fully charged, the indicator light will turn solid green.
Remove the battery by pressing the release button (if present on the battery) and sliding it out of the charger.
Disconnect the charger from the power outlet when not in use.

Indicator Lights

The charger features LED indicators to communicate the charging status:

Red Light (Solid): Battery is charging.
Green Light (Solid): Battery is fully charged.
Red Light (Flashing): Indicates a fault or error (e.g., battery too hot/cold, defective battery). Remove the battery and consult the troubleshooting section.

Close-up of TAURUSKING charger's indicator lights and battery slot — Figure 4: Close-up view of the battery slot and LED indicator lights on the charger.

Maintenance

Cleaning: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use abrasive cleaners or solvents.
Storage: Store the charger in a cool, dry place when not in use. Avoid storing it in areas with extreme temperatures or high humidity.
Inspection: Periodically inspect the power cord and plug for any signs of damage. If damaged, discontinue use and replace the charger.

Troubleshooting

If you encounter issues with your charger, refer to the table below for common problems and solutions:

Problem	Possible Cause	Solution
Charger not powering on	No power from outlet; Damaged power cord/plug	Check outlet with another device; Inspect cord/plug for damage. If damaged, replace charger.
Battery not charging (Red light flashing)	Battery too hot/cold; Defective battery; Improper battery insertion	Allow battery to reach room temperature (0-40°C); Try charging a different battery; Re-insert battery firmly.
Charging takes too long	Battery capacity is very high; Battery is old/degraded	Charging time varies with battery capacity and condition. If excessively long, consider battery replacement.
Charger feels warm during operation	Normal operation	It is normal for the charger to become warm during use. Ensure adequate ventilation. If it becomes excessively hot, disconnect immediately.

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.