Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Smeike A196-12 Outdoor Wall Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for outdoor use, featuring a classic black finish and clear glass panels, suitable for various exterior settings such as porches, patios, and garages.
Image: The Smeike A196-12 outdoor wall light fixture, showcasing its black finish and clear glass design.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for outdoor use and is ETL listed for safety.
- Do not install this fixture on surfaces that are easily flammable.
- Ensure the mounting surface can support the weight of the fixture.
- Use only bulbs of the specified type and wattage. Exceeding the maximum wattage may cause overheating and damage the fixture.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- Outdoor Wall Light Fixture (1)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual (1)
Note: Bulbs are not included and must be purchased separately.
Specifications
| Brand | Smeike |
| Model Name | A196-12 |
| Product Dimensions | 12.5"D x 9"W x 21.5"H |
| Backplate Dimensions | 4.7"W x 13.2"H |
| Material | Aluminum, Glass |
| Color | Black |
| Light Fixture Form | Sconce |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Installation Type | Flush Mount (Hardwired/Wall Mount) |
| Bulb Base | E12 |
| Max Wattage | 40W per bulb (Uses two E12 base bulbs) |
| Compatible Bulb Types | LED, Fluorescent, Incandescent |
| Voltage | 110 Volts (AC) |
| Special Features | Anti-Rust, Waterproof (IP65) |
| Certification | ETL Listed |
Image: Detailed dimensions of the Smeike A196-12 fixture, showing height, width, and depth measurements.
Setup and Installation
Follow these steps for safe and proper installation:
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Ensure the wall surface is clean, dry, and capable of supporting the fixture's weight.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws.
- Wire Connections:
- Connect the black wire from the fixture to the black (live) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting plate) using a wire nut.
- Mount the Fixture: Carefully align the fixture with the mounting plate and secure it with the provided screws.
- Install Bulbs: Insert two E12 base bulbs (not included) into the sockets. Do not exceed 40W per bulb. The open-bottom design facilitates easy bulb installation and replacement.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Image: The Smeike A196-12 fixture installed on an exterior wall, demonstrating its appearance in a typical outdoor setting.
Operating Instructions
The Smeike A196-12 Outdoor Wall Light Fixture operates via a standard wall switch (not included). Once installed and wired correctly, simply toggle the connected wall switch to turn the light on or off.
- Power On/Off: Use the wall switch to control the light.
- Bulb Compatibility: This fixture is compatible with LED, Fluorescent, and Incandescent bulbs with an E12 base, up to 40W each.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your outdoor light fixture.
- Cleaning: To clean the fixture, first disconnect power. Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass. The open-bottom design allows for easy cleaning of the interior and bulb area.
- Bulb Replacement: Disconnect power before replacing bulbs. The open-bottom design allows for convenient access to the bulb sockets. Ensure replacement bulbs are E12 base and do not exceed 40W.
- Weather Resistance: The fixture is constructed from high-quality die-cast aluminum with a powder coating and sturdy clear glass panels, making it anti-rust, anti-corrosion, and waterproof (IP65 rated). While designed for various weather conditions, periodic inspection for any damage is recommended.
Thicken Clear Glass
Powder Coating
Open-bottom Design
Images: Features contributing to durability and ease of maintenance, including thick clear glass, powder coating, and an open-bottom design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass is broken or cracked. |
|
|
Warranty and Support
The Smeike A196-12 Outdoor Wall Light Fixture comes with a one-year warranty from the date of purchase, covering defects in materials and workmanship.
For warranty claims, technical assistance, or replacement parts, please contact Smeike customer support. Provide your model number (A196-12) and proof of purchase when contacting support.
Smeike Customer Support:
- Refer to the contact information provided with your purchase or visit the official Smeike website for support details.
- Online resources may include FAQs and additional troubleshooting guides.
