TJCYGO Richmat HJH55 Remote
User Manual: TJCYGO Richmat HJH55 Adjustable Bed Remote Control
Model: Richmat HJH55 Remote
Product Overview
This manual provides instructions for the TJCYGO Richmat HJH55 Remote Control, designed as a replacement for various adjustable bed systems, including Richmat HJH55, Mattress Firm 600 3000, Mlily, Bed Tech, and Classic Brand Inova with the NU203CB processor box. It is also compatible with the Richmat base HJC9G dual mass control system. This remote offers comprehensive control over your adjustable bed's functions, enhancing your comfort and sleeping experience.
Image Description: A black remote control for an adjustable bed is shown on the left, featuring various buttons for head and foot adjustments, massage, and preset positions. On the right, a small black control box or receiver is displayed with a white label. The label indicates "Richmat Model: HJH55" and "Contains FCC ID: 2AJJGHJRF", along with FCC compliance statements. This image illustrates both the remote and a component of its compatible system.
Compatibility and Setup
Compatibility
The Richmat HJH55 remote control is compatible with the following adjustable bed systems:
- Richmat HJH55 adjustable bases
- Mattress Firm 600 and 3000 adjustable bases
- Mlily adjustable bases
- Bed Tech adjustable bases
- Classic Brand Inova adjustable bases with the NU203CB noted on the processor box
- Richmat base HJC9G dual mass control system
Important Note: The Richmat base HJC9G control system does not have a universal jumper. Ensure the motor plug matches the plug on the control box. Compatible plugs typically have 7 circular pins with an additional pin in the center.
Programming Instructions
Follow these steps to program your Richmat HJH55 remote control:
- On the remote control, simultaneously press and hold the "Head Up" button and the "Foot Up" button for 10 seconds.
- Locate the control box underneath your bed. Push the button on the side of the control box that is indicated for reset coding (this button is usually labeled "Learn" or "Reset Coding"). Do not press and hold this button; simply press and release it.
- Once you hear beeps, this indicates that the remote is successfully synced with the adjustable base.
For visual guidance, you may also find programming videos for the Richmat HJH55 remote on video-sharing platforms.
Operating the Remote Control
The Richmat HJH55 remote control provides intuitive access to various adjustable bed functions. Below is a guide to the primary buttons and their operations:
| Button Label | Function |
|---|---|
| TV | Activates the TV preset position. |
| ANTI SNORE | Adjusts the bed to a position designed to alleviate snoring. |
| ZG | Activates the Zero Gravity preset position. |
| HEAD ▲ | Raises the head section of the bed. |
| HEAD ▼ | Lowers the head section of the bed. |
| FOOT ▲ | Raises the foot section of the bed. |
| FOOT ▼ | Lowers the foot section of the bed. |
| M1, M2, M3 | Customizable memory preset buttons. Press and hold to save a position; press briefly to recall. |
| 10 MIN | Activates a 10-minute massage timer (if applicable to your bed model). |
| 20 MIN | Activates a 20-minute massage timer (if applicable to your bed model). |
| HEAD (Flat) | Flattens the head section of the bed. |
| FLAT | Returns the entire bed to a flat position. |
| FOOT (Flat) | Flattens the foot section of the bed. |
| TIMER / ALL OFF | Turns off all active functions or sets a general timer. |
| 💡 (Light/Speaker) | Activates under-bed lighting or controls speaker functions (if applicable). |
| MODE | Cycles through different massage modes or other bed functions. |
Maintenance
The Richmat HJH55 remote control is designed for durability and requires minimal maintenance.
- Keep the remote clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Protect the remote from extreme temperatures and direct sunlight.
- Avoid dropping the remote or subjecting it to strong impacts.
- If the remote's performance degrades, ensure batteries are properly inserted and have sufficient charge (battery type not specified, but standard for remotes).
Troubleshooting
Remote Not Responding
- Check Battery: Ensure batteries are correctly installed and have adequate power. Replace if necessary.
- Re-program Remote: If the remote loses connection or is a new replacement, follow the "Programming Instructions" in the Setup section to re-sync it with your adjustable base.
- Proximity: Ensure you are within the wireless range of 5-10 meters from the adjustable base's control box.
- Obstructions: Check for any physical obstructions between the remote and the control box that might interfere with the radio frequency signal.
Compatibility Issues
- Verify that your adjustable bed system's model number and processor box (e.g., NU203CB) are explicitly listed in the "Compatibility" section.
- For Richmat base HJC9G systems, confirm that the motor plug on your bed matches the 7 circular pins with a center pin configuration required by this remote's compatible control box.
- If your bed model is not listed or the plug configuration does not match, this remote may not be compatible.
Specifications
| Feature | Detail |
|---|---|
| Model Number | Richmat HJH55 Remote |
| Brand | TJCYGO |
| Material | Durable ABS plastic |
| Color | Black |
| Dimensions (L x W x H) | 6.8 inches x 1.9 inches x 0.31 inches |
| Wireless Range | 5-10 meters |
| Connectivity Technology | Radio Frequency (RF) |
| Special Features | Head Adjustment, Foot Adjustment, TV Switch, Full Adjustable Base, Memory Presets (M1, M2, M3), Timers (10 MIN, 20 MIN), Flat Position controls. |
| FCC ID | 2AJJGHJRF (as noted on the control box label) |
Warranty and Support
TJCYGO is committed to customer satisfaction and provides the following support:
- Warranty: A two-year warranty is provided for this product.
- Returns/Refunds: You may apply for an unconditional full refund or return if you are not completely satisfied.
- Customer Service: For any questions or issues, please contact customer support via email. A response will be provided within 12 hours.
Please refer to your purchase documentation or the seller's contact information for specific email addresses or support channels.