WACOOL TERRA JRL04UTC

WACOOL TERRA Reptile Lighting Fixture with Dimming Thermostat

Model: JRL04UTC

1. Product Overview

The WACOOL TERRA Reptile Lighting Fixture with Dimming Thermostat is designed to provide optimal lighting and temperature conditions for your reptile pets. This reliable and convenient solution features a 5.5-inch deep dome lamp fixture and an integrated temperature controller. It allows precise control over the heat output from the lamp, ensuring your reptiles can bask comfortably at their preferred temperature, promoting their overall health.

The deep dome design efficiently directs light and heat downwards, maximizing efficiency and preventing unnecessary heat loss. Its robust construction ensures long-term use, and the included clamp allows for secure attachment to various terrarium setups. This fixture is suitable for a wide range of reptiles, including turtles, lizards, and snakes, and is compatible with various heat sources such as incandescent bulbs, ceramic heat emitters, and infrared bulbs (bulbs not included, maximum 100W).

WACOOL TERRA Reptile Lighting Fixture with Dimming Thermostat

Image 1.1: WACOOL TERRA Reptile Lighting Fixture with Dimming Thermostat. This image shows the complete lighting fixture with its deep dome design and the attached thermostat controller.

2. Safety Information

  • Indoor Use Only: This product is designed for indoor use in terrariums. Do not use outdoors or in wet environments.
  • Maximum Wattage: Do not exceed the maximum wattage of 100W for any bulb used with this fixture. Using higher wattage bulbs can cause overheating and damage.
  • High Temperature Warning: The lamp fixture and bulb can become extremely hot during operation. Avoid direct contact. Ensure the fixture is placed at a safe distance from flammable materials and surfaces.
  • Temperature Indicator: The fixture includes a visual indicator that turns red if the temperature is too high. If this occurs, immediately reduce the wattage or adjust the thermostat settings.
  • Secure Installation: Always ensure the fixture is securely clamped or mounted to prevent it from falling into the terrarium or onto other surfaces.
  • Electrical Safety: Ensure the power cord is not damaged or pinched. Do not operate with a damaged cord or plug. Unplug the unit before performing any maintenance or bulb replacement.
Temperature warning on lamp fixture

Image 2.1: The lamp fixture features a warning indicator that turns red if the temperature becomes excessively high, signaling a need for adjustment.

3. Package Contents

Please check the package contents upon receipt to ensure all items are present and undamaged.

  • 1 x WACOOL TERRA Reptile Lighting Fixture (5.5-inch deep dome)
  • 1 x Dimming Thermostat with Temperature Controller
  • 1 x Clamp for mounting
  • 1 x User Manual

4. Setup Instructions

4.1 Installing the Bulb

  1. Ensure the fixture is unplugged from the power outlet.
  2. Carefully screw an E27 base reptile heat or light bulb (maximum 100W) into the ceramic lamp cap of the fixture. Do not overtighten.
E27 ceramic lamp cap

Image 4.1: Close-up view of the E27 ceramic lamp cap, designed for secure bulb installation.

4.2 Mounting the Fixture

  1. Attach the provided clamp to the fixture's hanging hook.
  2. Securely fasten the clamp to the edge of your terrarium or a suitable mounting stand. Ensure the fixture is stable and cannot be easily dislodged.
  3. Position the lamp to provide the desired basking spot or ambient heat without direct contact with the reptile or terrarium decor.
Easy to hang design of the lamp fixture

Image 4.2: The fixture features an easy-to-hang design with a sturdy hook for secure placement.

4.3 Connecting the Thermostat

  1. Plug the power cord of the lamp fixture into the thermostat's output socket.
  2. Plug the thermostat's power cord into a standard electrical outlet.
  3. The LED digital screen on the thermostat will illuminate, indicating it is ready for operation.
LED digital screen on the thermostat

Image 4.3: The LED digital screen displays the current temperature and settings, ensuring clear visibility.

5. Operating Instructions

5.1 Setting the Temperature

  1. Press the SET button once. The displayed temperature will start flashing.
  2. Use the Up (▲) and Down (▼) buttons to adjust the desired temperature.
  3. Press the SET button again to confirm your selection. The display will stop flashing and show the current temperature.
Thermostat control buttons: Up, Down, Set

Image 5.1: The thermostat features intuitive Up, Down, and Set buttons for easy temperature adjustment.

5.2 Temperature Unit Selection (Celsius/Fahrenheit)

To switch between Celsius (℃) and Fahrenheit (℉):

  1. With the thermostat powered on, press and hold the Up (▲) and Down (▼) buttons simultaneously for a few seconds until the unit changes.

5.3 Dimming Functionality

The thermostat automatically adjusts the power output to the lamp to maintain the set temperature. This dimming feature provides a more stable and efficient heating environment, preventing rapid temperature fluctuations.

PID Thermostat Mode graph showing stable temperature control

Image 5.2: Graph illustrating the stable temperature control achieved with the PID thermostat mode compared to traditional on/off heating.

5.4 Power-Off Memory Function

The thermostat is equipped with a power-off memory function. In the event of a power outage, the device will retain its last set temperature settings and resume operation automatically once power is restored. No manual reset is required.

Power-off memory function demonstration

Image 5.3: This image demonstrates the power-off memory function, showing the thermostat retaining settings after a power interruption.

6. Maintenance

6.1 Cleaning

  • Always unplug the fixture and allow it to cool completely before cleaning.
  • Wipe the exterior of the lamp fixture and thermostat with a soft, dry cloth.
  • Do not use abrasive cleaners or immerse any part of the unit in water.

6.2 Bulb Replacement

  • Ensure the fixture is unplugged and the old bulb has cooled down completely.
  • Carefully unscrew the old bulb and dispose of it properly.
  • Screw in a new E27 base reptile heat or light bulb (maximum 100W).

7. Troubleshooting

ProblemPossible CauseSolution
Lamp not turning onNo power; Bulb faulty; Thermostat setting too lowCheck power connection; Replace bulb; Adjust thermostat to a higher temperature.
Temperature too high/lowIncorrect thermostat setting; Bulb wattage too high/lowAdjust thermostat setting; Ensure bulb wattage is appropriate for the enclosure size and desired temperature. Check for red warning indicator.
Temperature fluctuates significantlySensor placement; Drafts in enclosureEnsure thermostat sensor is placed correctly and not directly under the lamp; Minimize drafts in the terrarium.

If you experience issues not listed here, please contact customer support.

8. Specifications

  • Brand: WACOOL TERRA
  • Model Number: JRL04UTC
  • Product Dimensions: 13.97 x 13.97 x 13.97 cm (5.5 x 5.5 x 5.5 inches)
  • Item Weight: 449 g (0.99 lbs)
  • Light Type: Incandescent (compatible with ceramic heat emitters, infrared bulbs)
  • Maximum Wattage: 100 W
  • Bulb Base: E27
  • Features: 5.5-inch Deep Dome, Thermostat, Dimmable, High Efficiency

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact your retailer. You may also visit the official WACOOL TERRA website for further assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.