Grivel GV-PJLONGLE Climbing Axe Long Leash EVO Instruction Manual

Introduction

The Grivel GV-PJLONGLE Long Leash EVO is an essential accessory designed for securing your climbing axe during mountaineering and ice climbing activities. This 11mm wide flexible woven tape leash provides a secure connection, preventing accidental drops and ensuring your equipment remains tethered. It is lightweight and designed for comfortable use on the back of the hand.

Safety Information

• Inspect Before Use: Always check the leash for any signs of wear, cuts, fraying, or damage before each use. Do not use if damaged.
• Proper Attachment: Ensure the leash is correctly and securely attached to both the climbing axe and your harness or wrist as intended. Refer to the setup instructions.
• Intended Use: This leash is designed to prevent the loss of a climbing axe. It is not a load-bearing device for fall arrest or belaying.
• Environmental Factors: Extreme temperatures, UV exposure, and abrasive surfaces can degrade materials over time. Store and use appropriately.
• User Responsibility: The user is responsible for understanding the proper use and limitations of this equipment. Seek professional instruction if unsure.

Setup

Follow these steps to properly attach the Grivel Long Leash EVO to your climbing axe and wrist/harness.

1. Identify Leash Components: The leash consists of a flexible woven tape, an attachment point for the axe, and an adjustable loop for the wrist or harness.
2. Attach to Climbing Axe: Securely loop the designated end of the leash through the attachment hole or carabiner point on your climbing axe. Ensure the connection is tight and cannot accidentally detach.

Image: The leash featuring a cone-shaped attachment point, designed to secure to the climbing axe.
3. Adjust Wrist/Harness Loop: Place the other end of the leash around your wrist or attach it to a suitable point on your harness. Adjust the slider mechanism to achieve a snug but comfortable fit that allows for necessary movement without being too loose.


Image: Close-up of the black plastic slider on the leash, used for adjusting the loop size.


Image: The silver metal buckle component of the leash, providing a secure fastening point.
4. Test Connection: Gently tug on the leash and axe to ensure all connections are secure and the leash does not interfere with your movement or the axe's function.

Operating

The Grivel Long Leash EVO is designed for passive security during climbing and mountaineering. Once properly attached, it acts as a tether to prevent the accidental loss of your ice axe.

• Freedom of Movement: The flexible design and 80 cm (31.5 inches) maximum working length allow for a good range of motion while keeping the axe secured.
• Quick Release (if applicable): If your specific setup includes a quick-release mechanism, familiarize yourself with its operation for emergency situations. The Long Leash EVO primarily focuses on preventing drops.
• Avoid Entanglement: Be mindful of the leash during movement to prevent it from snagging on gear or terrain.

Maintenance

Proper maintenance extends the life of your Grivel Long Leash EVO and ensures its reliability.

• Cleaning: Clean the leash with mild soap and lukewarm water. Rinse thoroughly and allow it to air dry completely away from direct sunlight or heat. Do not use harsh chemicals or bleach.
• Storage: Store the leash in a cool, dry, dark place, away from chemicals, sharp objects, and direct sunlight. Avoid storing it under heavy items that could compress or damage the webbing.
• Inspection: Regularly inspect the entire length of the webbing, stitching, and all attachment points for any signs of wear, cuts, abrasions, discoloration, or damage. Pay close attention to areas that experience friction.
• Retirement: Retire the leash immediately if any damage is found, or if it has been subjected to significant impact or stress. Even if no visible damage is present, materials degrade over time. Follow manufacturer guidelines for product lifespan.

Troubleshooting

The Grivel Long Leash EVO is a simple accessory. Most issues relate to improper attachment or wear.

• Leash feels too loose/tight: Re-adjust the slider mechanism to achieve a comfortable and secure fit. Ensure it's not impeding circulation or movement.
• Leash appears damaged: If you observe any cuts, fraying, or significant wear, discontinue use immediately and replace the leash. Do not attempt to repair it.
• Axe detaches from leash: Re-check the attachment point on the axe. Ensure it is securely looped and cannot slip off. If the attachment point on the leash itself is compromised, replace the leash.

Specifications

Warranty and Support

Grivel products are manufactured to high standards. For specific warranty information, please refer to the official Grivel website or contact their customer support directly. Keep your proof of purchase for any warranty claims.

• Manufacturer: Grivel S.r.l.
• Address: Località Champagne 5, 11020 Verrayes (AO) Italy
• Phone: +39.0166.546287
• Email: info@grivel.com
• Website: www.grivel.com

Image: Back of the product packaging showing manufacturer contact information and product details.