Gepas YT-2000 Automatic Electric Rotating Panoramic Head Stabilizer User Manual

1. Introduction

This user manual provides detailed instructions for the operation and maintenance of the Gepas YT-2000 Automatic Electric Rotating Panoramic Head Stabilizer. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Safety Information

• Do not expose the device to water or excessive moisture.
• Avoid dropping or subjecting the device to strong impacts.
• Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
• Keep out of reach of children.
• Use only the specified charging voltage (5V) and Type-C cable.

3. Package Contents

Verify that all items are present in the package:

• 1 x YT-2000 Automatic Electric Rotating Panoramic Head Stabilizer
• 1 x Remote Control
• 1 x Type-C Charging Cable
• 1 x User Manual (this document)

4. Product Overview

Familiarize yourself with the components of the YT-2000 stabilizer.

Figure 1: Front view of the Gepas YT-2000 Automatic Electric Rotating Panoramic Head Stabilizer. The image shows the main body of the stabilizer with its rotating base, the camera/phone mounting platform on top, and the control panel with buttons and a switch for remote and tracking functions. The Zifon YT-2000 branding is visible on the control panel.

Key Components:

• Mounting Platform: For attaching smartphones or mirrorless cameras.
• Pan/Tilt Mechanism: Allows for horizontal rotation and vertical tilt.
• Control Panel: Includes power switch, function buttons, and indicator lights.
• Remote Control Receiver: For wireless operation.
• 1/4-inch Universal Interface: Located at the base for tripod mounting.
• Type-C Charging Port: For battery charging.

5. Setup

1. Charge the Device: Connect the Type-C charging cable to the stabilizer's charging port and a 5V power source. The battery capacity is 2000mAh. A full charge provides over 10 hours of battery life.
2. Mount on Tripod (Optional): If desired, attach the stabilizer to a tripod using the 1/4-inch universal interface at its base.
3. Attach Camera/Smartphone: Securely mount your smartphone or mirrorless camera onto the stabilizer's mounting platform. Ensure it is balanced to prevent strain on the motors. The maximum bearing capacity is 2000g (2kg or approximately 4.4 lbs).

6. Operating Instructions

6.1 Power On/Off

• To power on, locate the power switch on the control panel and slide it to the 'ON' position.
• To power off, slide the power switch to the 'OFF' position.

6.2 AI Follow Function (Face Recognition)

The YT-2000 features an AI smart chip for face recognition tracking.

1. Ensure the device is powered on.
2. Slide the power switch down to enter the follow-up state. The green indicator light will be continuously on, indicating that the device is actively recognizing and tracking faces.
3. Position yourself or the subject within the camera's view for the device to initiate tracking.

6.3 Remote Control Operation (2.4G Wireless)

The included 2.4G wireless remote control allows for remote adjustment of direction and rotation speed.

• Direction Control: Use the directional buttons on the remote to pan the stabilizer left or right.
• Speed Adjustment: The horizontal rotation speed is 8-level adjustable, ranging from 0.05 rpm to 0.6 rpm. Refer to the remote control's specific buttons for speed increment/decrement.
• Channel Selection: The remote control supports 0-99 channels. Ensure the remote and stabilizer are on the same channel for proper communication.

7. Charging

The YT-2000 is equipped with a 2000mAh rechargeable battery.

• Connect the provided Type-C USB cable to the charging port on the stabilizer.
• Connect the other end of the cable to a standard USB power adapter (5V rated charging voltage) or a computer USB port.
• The charging indicator light will illuminate during charging and turn off or change color when fully charged (refer to device for specific light behavior).
• A full charge typically provides over 10 hours of continuous operation.

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the stabilizer. Do not use liquid cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery for extended periods.

9. Troubleshooting

10. Specifications

11. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Gepas customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.