KIYTARBOO KIYTARBOO11
KIYTARBOO Label Dispenser User Manual
Model: KIYTARBOO11
Introduction
Thank you for choosing the KIYTARBOO Label Dispenser. This adjustable sticker roll holder is designed to organize and dispense various types of labels, stickers, and tapes, helping to keep your workspace tidy and improve efficiency. Made from durable acrylic material, it offers a transparent design and adjustable discs for versatile use in offices, homes, schools, studios, libraries, and restaurants.
Image: The KIYTARBOO Label Dispenser, showcasing its clear acrylic structure holding several rolls of colorful circular labels. Labels are shown being dispensed from the front.
Safety Information
- Handle with care: Although durable, acrylic can scratch or break if dropped or subjected to excessive force.
- Keep out of reach of small children: Small parts, such as the adjustable discs, could pose a choking hazard.
- Do not use abrasive cleaners: Use a soft cloth and mild soap or acrylic cleaner to prevent damage to the surface.
- Ensure stable placement: Place the dispenser on a flat, stable surface to prevent tipping.
Package Contents
Please verify that all components are present before assembly:
- 1 x Acrylic Dispenser Base
- 1 x Rotating Spindle (Acrylic Post)
- 6 x Adjustable Discs (Small Dividers)
- 3 x Horizontal Rods (for label neatness)
Setup and Assembly
The KIYTARBOO Label Dispenser is designed for easy assembly. Follow these steps to set up your dispenser:
- Remove Protective Film: Gently peel off the protective paper/film from both sides of all acrylic components, especially the small adjustable discs.
- Prepare Spindle and Discs: Place the desired number of adjustable discs onto the rotating spindle. These discs help separate multiple rolls of labels.
- Load Label Rolls: Slide your label rolls onto the spindle, positioning them between the adjustable discs as needed.
- Insert Spindle into Base: Carefully pass the assembled spindle with label rolls through the acrylic post openings on the dispenser base. Ensure the spindle is securely seated in the grooves.
- Position Horizontal Rods: Ensure the three horizontal rods at the bottom are in place. These rods help keep the dispensed labels neat and prevent tangling.
Image: A visual guide showing the three main steps for assembly: peeling off protective film, placing discs and rolls on the spindle, and inserting the spindle into the dispenser base.
Operating Instructions
Using your KIYTARBOO Label Dispenser is straightforward:
- Loading Labels: After assembly, ensure your label rolls are properly seated on the spindle and separated by the adjustable discs if using multiple rolls.
- Dispensing Labels: Gently pull the leading edge of the label strip from the front of the dispenser. The rolls will rotate smoothly, allowing for easy dispensing.
- Adjusting Discs: The 6 adjustable discs can be moved along the spindle to accommodate different label roll widths or to create compartments for better organization. This allows you to classify and quickly find the labels you need.
- Maintaining Neatness: The three horizontal columns at the bottom are designed to keep the dispensed label strips neat and prevent them from tangling or falling.
Image: An illustrative diagram highlighting the adjustable discs for separating label rolls and the horizontal columns for keeping dispensed labels neat.
Maintenance
To ensure the longevity and clear appearance of your KIYTARBOO Label Dispenser, follow these maintenance guidelines:
- Cleaning: Wipe the acrylic surfaces with a soft, damp cloth. For stubborn marks, use a mild soap solution or a specialized acrylic cleaner. Avoid using abrasive cleaners, ammonia-based products (like window cleaner), or solvents, as these can damage the acrylic.
- Dust Removal: Regularly dust the dispenser to maintain its transparent appearance and prevent dust buildup from affecting the smooth rotation of label rolls.
- Inspection: Periodically check all components for any signs of wear or damage. Ensure the spindle rotates freely and the discs are not cracked.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Labels not dispensing smoothly. | Spindle not properly seated; excessive friction; labels tangled. | Ensure the spindle is correctly placed in its grooves. Check for any obstructions or tangles in the label rolls. |
| Dispenser appears cloudy or scratched. | Protective film not fully removed; improper cleaning agents used. | Ensure all protective film has been removed. Clean with a soft cloth and mild soap or acrylic cleaner only. |
| Label rolls slide around too much. | Insufficient use of adjustable discs; rolls are too narrow for the space. | Utilize the adjustable discs to snugly separate and hold label rolls in place. Consider using wider rolls if available. |
Specifications
- Brand: KIYTARBOO
- Model: KIYTARBOO11
- Material: Acrylic
- Product Dimensions: Approximately 9.00 x 7.08 x 3.54 inches (22.86 x 17.98 x 8.99 cm)
- Item Weight: Approximately 1.19 pounds (0.54 kg)
- Core Size Compatibility: 0.25 inches (for label roll cores)
- Operation Mode: Manual
Image: A detailed diagram illustrating the dimensions of the label dispenser and the compatible core size for label rolls.
Warranty and Support
For any questions, concerns, or support regarding your KIYTARBOO Label Dispenser, please contact our customer service. While specific warranty details are not provided in this manual, we are committed to ensuring your satisfaction with our product.
Please refer to your purchase documentation or the retailer's website for the most up-to-date warranty information and contact details.
You can also visit the official KIYTARBOO store on Amazon for more information and product updates: KIYTARBOO Amazon Store