Product Overview
The OnLyee Projection Alarm Clock is designed to provide clear time display on its large LED screen and project the time onto your ceiling or wall. It features dual alarms, a USB charging port, and adjustable brightness and volume settings for a personalized experience.
Image: The OnLyee Projection Alarm Clock displaying time, with the time also projected onto a wall. A smartphone is shown charging via the clock's USB port.
Video: This video demonstrates the key features of the OnLyee Projection Alarm Clock, including its projection capabilities, adjustable brightness, dual alarm function, USB charging port, and 12/24-hour time format.
Setup Guide
Package Contents:
- 1x OnLyee Projection Alarm Clock
- 1x Power Adapter
- 1x USB Charging Cable
- 2x Black Brackets (for stability)
- 1x User Manual
Image: The image displays all items included in the product package: the projection alarm clock, its power adapter, a USB charging cable, two black stabilizing brackets, and the user manual.
Powering On and Battery Backup:
- Connect the provided power adapter to the clock and plug it into a standard AC outlet (100-240V). The clock requires AC power for normal operation.
- For battery backup, insert 2 AAA batteries (not included) into the battery compartment. These batteries will preserve your personal settings (time, alarms) during a power outage, but the clock display will not be active without AC power.
Initial Time Setting:
Upon first power-on or after a prolonged power loss without battery backup, the clock may display a default time. Follow these steps to set the correct time:
- Press the SET TIME button. The hour digits will begin to flash.
- Use the HOUR button to adjust the hour.
- Press the MIN button to adjust the minutes.
- Press SET TIME again to confirm and exit time setting mode.
Operating Instructions
Time Format (12/24H) and DST:
The clock supports both 12-hour and 24-hour time formats, and a Daylight Saving Time (DST) function.
- To switch between 12-hour and 24-hour format, press the 12/24H button.
- To activate or deactivate Daylight Saving Time (DST), press the DST button.
Image: Two alarm clocks are shown side-by-side, one displaying time in 12-hour format (11:26 AM) and the other in 24-hour format (23:26), illustrating the selectable time display options.
Display Brightness Adjustment:
The 7-inch LED screen has 5 adjustable brightness levels.
- Press the DIMMER button repeatedly to cycle through the 5 brightness levels (100%, 75%, 50%, 25%, 5%).
Image: This image demonstrates the 5-level adjustable brightness of the clock's LED display, showing the clock face at various illumination intensities from 100% to 5% brightness.
Projection Settings:
The projection feature allows you to view the time on your ceiling or wall.
- The projector can be rotated 180° for optimal viewing angle.
- Adjust the focus ring on the projector to achieve a clear image at distances between 1.64-11.4 feet (0.5-3 meters).
- To flip the projected image 180°, press the PROJECTION ON/FLIP/OFF button. This button also turns the projection on or off.
- The projection brightness can also be adjusted.
Image: The image illustrates the projection feature, showing the optimal projection distance (1.64-11.4ft) and the ability to flip the projected time 180 degrees for correct orientation.
Dual Alarms and Snooze:
Set two independent alarms with adjustable volume.
- To set Alarm 1 or Alarm 2, press the corresponding ALARM1 or ALARM2 button. The hour digits will flash.
- Use the HOUR and MIN buttons to set the desired alarm time.
- Press the ALARM1 or ALARM2 button again to confirm.
- To adjust alarm volume, use the TU+ and TU- buttons (often labeled as volume controls). The clock offers 5 levels of adjustable volume.
- When an alarm sounds, press the large SNOOZE/OK button on top to get an extra 9 minutes of sleep.
- To turn off an alarm completely, press the corresponding ALARM OFF button.
Image: This image illustrates the dual alarm functionality, showing two separate alarm settings: one for waking up in the morning (Alarm 1) and another for a different time, such as an evening reminder (Alarm 2).
Image: A hand is shown pressing the large SNOOZE/OK button on top of the alarm clock, indicating the activation of the 9-minute snooze function.
USB Charging Port:
The clock includes a USB charging port for your electronic devices.
- Connect your smartphone, tablet, or other USB-powered device to the USB charging port on the clock using your device's charging cable.
- This port provides convenient charging without needing an additional wall adapter.
Image: A smartphone is shown connected to and charging from the USB port located on the side of the OnLyee Projection Alarm Clock, which is placed on a bedside table.
Radio Function:
The clock features a built-in FM radio.
- To turn the radio on or off, press the RADIO button.
- Use the MEM/M+ button to scan and save radio stations.
- Use the TU+ and TU- buttons to tune to specific frequencies or navigate saved stations.
Maintenance
To ensure the longevity and proper functioning of your OnLyee Projection Alarm Clock, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
- Battery Replacement: If you use the battery backup feature, replace the AAA batteries periodically (e.g., once a year) to ensure settings are retained during power outages. Ensure the clock is powered off or unplugged before replacing batteries.
- Placement: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture. Ensure adequate ventilation around the unit.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Clock display is off / No power. |
|
| Projection is blurry or unclear. |
|
| Projected time is upside down or reversed. |
|
| Alarm does not sound. |
|
| USB charging port not working. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | OnLyee |
| Model Number | CR1001F |
| Display Type | Digital LED |
| Product Dimensions | 1.18"W x 3.58"H |
| Item Weight | 10.5 ounces |
| Power Source | Corded Electric, Battery Powered (backup only) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Special Features | Projection Clock, Adjustable Brightness (5-level), Adjustable Volume (5-level), Dual Alarm, USB Charging Port, Daylight Saving (DST), Large Display, 12/24 Hour Format, Snooze, FM Radio |
| Projection Distance | 1.64-11.4 feet (0.5-3 meters) |
| Projection Rotation | 180° Adjustable Projector, 180° Image Flip |
Warranty and Support
OnLyee products are designed for reliability and customer satisfaction.
- Warranty: All OnLyee products come with a 180-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures your peace of mind.
- Customer Service: Our dedicated customer service team is available 24/7 to assist you with any inquiries, technical support, or requests you may have.
- Contact: Please refer to the contact information provided in your product packaging or visit the official OnLyee website for support.
