Introduction
This manual provides instructions for the safe and efficient operation, maintenance, and troubleshooting of your EQCOTWEA Automatic Paint Shaker Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.
Image: Front view of the EQCOTWEA Automatic Paint Shaker Machine, showcasing its compact design and control panel.
Safety Precautions
- Always ensure the machine is properly grounded before connecting to power.
- Do not operate the machine with the door open. The safety interlock prevents operation when the door is not securely closed.
- Use the emergency stop button immediately in case of any malfunction or unsafe condition.
- This machine is designed for mixing non-volatile liquids only. Do not use for food products or volatile/flammable substances.
- Ensure the paint can is securely clamped before starting the mixing process.
- Keep hands and loose clothing away from moving parts during operation.
Setup
- Unpacking: Carefully remove the machine from its packaging. Inspect for any shipping damage.
- Placement: Place the machine on a stable, level surface capable of supporting its weight (approximately 416 pounds). Ensure adequate clearance around the machine for ventilation and access.
- Power Connection: Connect the machine to a 110V, 60Hz, single-phase power supply. Verify the power requirements on the machine's label before connecting.
Image: Side view showing the main power switch and the voltage/frequency label (110V, 60Hz, Single Phase) for proper electrical connection.
Operating Instructions
- Open the Door: Unlock and open the transparent front door of the machine.
- Extend Rollers: Pull out the forward rollers to facilitate easy loading of the paint can.
Image: The machine with its front rollers extended, designed to simplify the loading process for paint cans.
- Adjust Height: Adjust the height of the shaking frame to accommodate the size of your paint can (0.5L to 20L capacity, 3.9-15.35 inches height).
- Load Paint Can: Place the paint can onto the platform.
Image: Illustration of the adjustable height feature, allowing the machine to securely hold paint cans ranging from 0.5L to 20L.
- Clamp Securely: Turn the manual clamping handwheel clockwise to firmly secure the paint can in place. Ensure it is stable and cannot move during operation.
Image: The machine with its transparent door open, highlighting the manual clamping handwheel used to secure the paint can.
- Close Door: Close and latch the transparent front door securely.
- Set Timer: Use the control panel to set the desired mixing time. The timer can be set from 0 to 15 minutes, with a minimum shaking time of 30 seconds.
- Start Operation: Press the 'Start' button to begin the mixing cycle. The machine will automatically stop once the set time has elapsed.
- Emergency Stop: In case of an emergency, press the red emergency stop button located on the control panel.
Image: Close-up of the machine's control panel, showing the digital timer display and the prominent red emergency stop button.
Maintenance
- Cleaning: Regularly clean the exterior and interior of the machine to prevent paint buildup. Use a damp cloth; avoid harsh chemicals.
- Inspection: Periodically inspect all moving parts, clamps, and electrical connections for wear or damage.
- Lubrication: Consult a qualified technician for any necessary lubrication of internal mechanisms.
- Spare Parts: Keep spare parts on hand as recommended by the manufacturer.
Image: A collection of spare parts, including springs, pins, and a wrench, provided for maintenance and replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power supply; Door not closed; Emergency stop engaged | Check power connection; Close door securely; Release emergency stop button |
| Mixing is uneven | Paint can not clamped properly; Incorrect height adjustment | Re-clamp paint can; Adjust shaking frame height |
| Unusual noise during operation | Loose components; Overload | Stop machine and inspect for loose parts; Reduce load if exceeding capacity |
Specifications
- Model: TP154001
- Voltage: 110V
- Frequency: 60Hz
- Power: 750W
- Capacity Range: 0.5 - 20 Liters (0.13 - 5.28 Gallons)
- Paint Bucket Height Adjustment: 3.9 - 15.35 inches
- Time Setting: 0 - 15 minutes (Min shaking time: 30s)
- Max Mixing Capacity: 30KG (66LB)
- Product Dimensions: 29.92 x 27.84 x 40.94 inches
- Item Weight: 416 pounds
- Special Features: Automatic Alarm, Continue Shake Up and Down, Emergency Stop Button, Safety Interlock
Image: Detailed diagram illustrating the key dimensions of the paint shaker machine in both millimeters and inches.
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact EQCOTWEA customer service directly. Please have your model number (TP154001) and purchase information ready when contacting support.