Introduction
This instruction manual provides detailed guidance for assembling and utilizing your Kyglaring Vertical Display Stand, specifically designed for the Lego Ultimate Millennium Falcon 75192 model. This stand allows for a vertical display of your model, optimizing space and enhancing presentation.
Safety Information
No specific safety warnings are applicable to this product. Please ensure all small parts are kept away from young children to prevent choking hazards.
Package Contents
Before beginning assembly, verify that all components are present:
- 409 Building Blocks (for the vertical stand structure)
- 3 Black Acrylic Bases (for minifigures and nameplates)
- Colorful Installation Instructions
Note: The Lego Ultimate Millennium Falcon 75192 model and minifigures are not included with this display stand.
Image: The Kyglaring Vertical Display Stand kit, showing the assembled stand, the acrylic base for minifigures, and the product packaging. The Lego Millennium Falcon model is shown in ghosted outline to illustrate its intended use.
Assembly Instructions
Follow the included colorful installation instructions carefully. The assembly process involves connecting 409 building blocks to form the vertical stand structure.
- Preparation: Unpack all components and organize the building blocks. It is recommended to separate similar pieces by size to facilitate assembly.
- Construct the Main Stand: Follow the step-by-step diagrams in the instruction manual to build the two vertical support structures and their connecting base. Pay close attention to the placement of the five short red rods, which are crucial for securing the model.
- Attach Acrylic Bases: The three black acrylic bases are designed for displaying Lego minifigures and nameplates. These can be attached to the front of the stand or placed separately. Ensure to remove any protective film from the acrylic pieces.
Image: Close-up views of the display stand's construction, highlighting the interlocking blocks and the red securing rods.
Image: Illustrates the acrylic base for minifigures and the function of the five short red rods for securing the model.
Operating Instructions (Mounting the Model)
Once the display stand is fully assembled, carefully mount your Lego Ultimate Millennium Falcon 75192 model:
- Prepare the Model: It is necessary to remove four of the landing gear pieces from your Millennium Falcon model before mounting it on the stand.
- Positioning: Carefully remove any loose top panels from your Millennium Falcon. Stand the model on its side, resting on the port side docking port.
- Attachment: Align the model with the stand. Snap the top two pins of the stand into corresponding points on the model. Once these are secured, the stand can bear some weight, allowing you to push the remaining three pins into place. The five short red rods on the stand are designed to firmly hold the model.
- Final Adjustment: Ensure the model is securely seated on all five red rods and is stable before leaving it unattended.
Image: The Lego Millennium Falcon 75192 model displayed vertically on the Kyglaring stand, showcasing the space-saving and aesthetic benefits.
Maintenance
To maintain the appearance and stability of your display stand:
- Cleaning: Wipe the stand and acrylic bases with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the plastic or acrylic.
- Inspection: Periodically check all connections to ensure they remain secure, especially if the stand is moved.
Troubleshooting
- Difficulty with Assembly: If instructions are unclear, review the diagrams carefully and count peg holes to ensure correct piece placement. Online resources or community forums may offer additional visual guides.
- Missing Pieces: In the event of missing crucial components, please contact Kyglaring customer service for assistance.
- Model Not Fitting Securely: Ensure all five red rods are correctly aligned and inserted into the Millennium Falcon model. Verify that the four landing gear pieces have been removed from the model. If issues persist, re-examine the stand's assembly for any misaligned parts.
Specifications
| Feature | Detail |
|---|---|
| Brand | Kyglaring |
| Model Name | bks-75192 |
| Compatibility | Lego Ultimate Millennium Falcon 75192 |
| Number of Pieces | 409 |
| Material | High-hardness Plastic, Acrylic |
| Assembled Dimensions (L x W x H) | Approximately 11 x 8.5 x 14.8 inches (27.9 x 21.6 x 37.6 cm) |
| Color | Grey (blocks), Black (acrylic base) |
Image: Technical drawing showing the dimensions of the assembled display stand and the acrylic base.
Warranty and Support
Kyglaring offers a 100% Satisfaction Guarantee. If you have any questions, concerns, or require assistance with missing parts, please contact Kyglaring customer service directly.
For additional support and to access the web manual, please visit: http://instructions.kyglaring.com
Image: Illustrates the availability of both a web-based manual and a paper manual, with a QR code for online access.
