Sauthon Antonin 60x120 Baby Crib - Instruction Manual

1. Product Overview

The Sauthon Antonin 60x120 Baby Crib is designed to provide a safe and comfortable sleeping environment for your baby. Featuring clean lines and a modern aesthetic, this crib integrates seamlessly into any nursery decor. It is constructed from durable wood and oak materials, ensuring longevity and stability.

Key features include two fixed side rails made of beech and medium-density fiberboard (MDF) with flat balusters, and a raw beech bed base that is adjustable to three different height positions to adapt to your child's growth and safety needs.

Figure 1: The Sauthon Antonin 60x120 Baby Crib, showcasing its design and structure.

2. Safety Information

Your child's safety is paramount. Please read and follow all instructions carefully before assembly and use. Keep this manual for future reference.

• Compliance: This crib conforms to the safety standards NF EN 716 n 1&2.
• Mattress Compatibility: Use only a mattress that is L 120 x l 60 x H 10 cm. An incorrect mattress size can create a gap that may entrap a child.
• Regular Checks: Periodically check all screws, bolts, and fasteners to ensure they are tight and secure. Do not use the crib if any parts are missing, damaged, or broken.
• Hazard Prevention: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Do not place items with a string around a child's neck, such as pacifier clips or necklaces.
• Supervision: Never leave your child unattended in the crib.

3. Package Contents

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Sauthon customer service.

• Headboard (1)
• Footboard (1)
• Fixed Side Rails (2)
• Adjustable Bed Base (1)
• Hardware Pack (screws, bolts, nuts, Allen key)

Note: The mattress and the optional storage drawer are sold separately and are not included in this package.

4. Setup and Assembly

This crib requires self-assembly. It is recommended that two adults assemble the crib to ensure safety and ease of construction. Please follow the detailed assembly instructions provided in the separate assembly guide included with your product. Ensure all connections are secure before placing your child in the crib.

1. Unpack all components and verify against the package contents list.
2. Attach the side rails to the headboard and footboard using the provided hardware. Do not overtighten.
3. Install the bed base at the desired height. Refer to the 'Operating Instructions' section for guidance on height adjustment.
4. Ensure all screws are fully tightened and the crib is stable before use.

Figure 2: The Sauthon Antonin Crib, shown with the optional storage drawer (sold separately).

5. Operating Instructions

The Sauthon Antonin crib features a 3-position adjustable bed base, allowing you to lower the mattress as your child grows and becomes more mobile. This feature is crucial for preventing falls.

• Highest Position: For newborns and infants who cannot yet sit up unassisted. This position allows for easier access to your baby.
• Middle Position: When your baby begins to sit up or push up on hands and knees.
• Lowest Position: When your baby begins to stand. The lowest position provides the maximum depth to prevent your child from climbing out.

To adjust the bed base height, carefully remove the mattress, then follow the instructions in your assembly guide to reposition the bed base supports to the desired height. Always ensure the bed base is securely locked into place at all four corners before replacing the mattress and placing your child in the crib.

6. Maintenance

Proper maintenance will extend the life of your Sauthon Antonin crib.

• Cleaning: Dust the crib regularly with a dry cloth. Do not use cleaning products, solvents, or abrasive materials, as these can damage the finish. For stubborn stains, use a slightly damp sponge and wipe dry immediately.
• Inspections: Periodically inspect the crib for any signs of wear, damage, or loose parts. Pay close attention to the bed base supports and all connection points.
• Storage: If storing the crib, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight or extreme temperatures.

7. Troubleshooting

If you encounter any issues with your Sauthon Antonin crib, please refer to the following common solutions:

• Crib feels wobbly: Check all screws and bolts to ensure they are fully tightened. Ensure the crib is on a flat, level surface.
• Difficulty adjusting bed base: Ensure the mattress is removed and there is no weight on the bed base. Check for any obstructions or misaligned parts.
• Squeaking noises: Tighten all hardware. A small amount of silicone spray (avoiding contact with wood finish) on metal-to-metal contact points might help, but ensure it is safe for use around children.

If the problem persists or if you have any concerns about the safety or functionality of your crib, please contact Sauthon customer support.

8. Specifications

9. Warranty and Support

Sauthon is committed to providing high-quality products. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Sauthon website. For any questions, concerns, or assistance with your Sauthon Antonin crib, please contact Sauthon customer support through their official channels.

Sauthon has been a specialist in childcare products since 1948, developing baby rooms with expertise and care.