1. Introduction
The BEOK CONTROLS R6XWIFI is a versatile WiFi heating thermostat designed for efficient control of heating boilers, gas, and water heating systems. It features a dual-sensor system for accurate temperature measurement, multiple power options, and smart control capabilities via a mobile application and voice assistants.
This manual provides detailed instructions for the installation, operation, and maintenance of your R6XWIFI thermostat to ensure optimal performance and comfort.
2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local electrical codes. Ensure the main power supply is disconnected before any wiring work.
- Voltage: The receiver operates on 220V AC. Incorrect wiring can cause damage to the device or heating system.
- Placement: Do not install the thermostat in areas with direct sunlight, drafts, or near heat sources, as this can affect temperature readings.
- Water Exposure: Avoid exposing the device to water or high humidity.
- Children: Keep the device out of reach of children. Utilize the child lock function to prevent unintended changes to settings.
3. Setup and Installation
3.1 Package Contents
- R6XWIFI Thermostat Unit
- Receiver Unit
- USB Type-C Cable (for optional power)
- Mounting Accessories (screws, wall anchors)
- User Manual (this document)
3.2 Powering the Thermostat
The thermostat unit can be powered in two ways:
- Battery Power: Insert 3 AA batteries (not included) into the battery compartment on the back of the thermostat.
- USB Power: Connect the provided USB Type-C cable to the thermostat and a compatible USB power adapter (not included).
Image: The thermostat unit showing options for battery power (3 AA batteries) and USB Type-C cable connection.
3.3 Receiver Installation and Wiring
The receiver unit should be installed on a wall near your heating boiler. Ensure the main power supply to the boiler is turned off before proceeding with wiring.
- Mount the receiver unit securely to the wall using the provided screws and anchors.
- Connect the 220V AC power supply to the L (Live) and N (Neutral) terminals on the receiver.
- Connect the boiler control wires to the K1 and K2 terminals. These are typically dry contact terminals for boiler activation. Consult your boiler's manual for specific wiring requirements.
- If applicable, connect external actuators or valves to the NO/NC terminals as per your heating system's configuration.
Image: Detailed wiring diagram showing connections for the receiver unit to a gas boiler, power supply (110~220V), and optional actuators/valves.
3.4 Thermostat Placement
The thermostat unit can be placed on a tabletop using its stand or mounted on a wall. For optimal performance, place the thermostat in a central location in the room, away from direct sunlight, drafts, or heat sources. The wireless range between the thermostat and receiver is up to 30 meters in open distance.
Image: The thermostat unit shown in two configurations: on a tabletop stand and wall-mounted, illustrating flexible placement options.
3.5 Pairing Thermostat with Receiver
The thermostat and receiver are usually pre-paired. If re-pairing is needed:
- On the receiver, press and hold the pairing button until the middle indicator light starts flashing.
- On the thermostat, press the 'Up' arrow button for 5 seconds until the communication icon (usually a signal tower) appears and flashes on the display.
- Once successfully paired, the middle indicator light on the receiver will become solid, and the communication icon on the thermostat will stop flashing.
3.6 Connecting to Wi-Fi and App
To enable smart control features, connect your thermostat to your home Wi-Fi network (2.4GHz only).
- Download the 'Smart Life' or 'Tuya Smart' application from your smartphone's app store (Google Play Store or Apple App Store).
- Register or log in to your account in the app.
- On the thermostat, press and hold the 'Up' arrow button for 5 seconds until the Wi-Fi icon on the display starts flashing. This puts the thermostat into pairing mode.
- In the app, follow the on-screen instructions to add a new device. Select 'Temperature Sensor' or 'Thermostat' from the device list.
- Enter your 2.4GHz Wi-Fi network name and password when prompted.
- The app will guide you through the connection process. Once connected, the Wi-Fi icon on the thermostat will become solid.
Image: Visual guide showing three steps to connect the thermostat to a Wi-Fi network: download the app, activate Wi-Fi pairing on the thermostat, and complete the setup in the app.
4. Operating Instructions
4.1 Basic Controls
- Power Button: Press to turn the thermostat ON/OFF.
- Up/Down Arrows: Adjust the target temperature.
- Mode Button (M): Cycle through different operating modes (e.g., Manual, Program, Eco).
- Clock/Time Button: Set the current time and date.
4.2 Programmable Scheduling
The thermostat supports weekly programming with options for 5+2 (weekdays + weekend), 6+1 (weekdays + one weekend day), or 7-day programming. You can set up to 6 distinct time periods and temperatures per day.
- Press the 'Mode' button until the program icon (often a calendar or clock) appears.
- Use the 'Up/Down' arrows and 'Mode' button to navigate and adjust the time and temperature for each period.
- Confirm settings to save your schedule.
Alternatively, you can easily configure your heating schedule through the 'Smart Life' or 'Tuya Smart' mobile application.
Image: A smartphone screen displaying the heating schedule programming interface within the app, allowing users to set daily and weekly temperature profiles.
4.3 Smart App Control
Once connected to Wi-Fi, you can control your thermostat remotely using the 'Smart Life' or 'Tuya Smart' app. This allows you to:
- Adjust temperature from anywhere.
- Set and modify heating schedules.
- Monitor current room temperature.
- Access advanced settings.
4.4 Voice Control
The thermostat is compatible with Amazon Alexa and Google Assistant. After linking your 'Smart Life' or 'Tuya Smart' account to your voice assistant, you can use voice commands to control your heating. For example:
- "Alexa, set the living room thermostat to 22 degrees."
- "Hey Google, what's the temperature in the bedroom?"
Image: A user interacting with the thermostat via a smartphone app and another user using voice commands with a smart assistant, highlighting the convenience of smart control.
4.5 Special Functions
- Child Lock: Activates a lock on the thermostat buttons to prevent accidental changes. This can usually be enabled/disabled via the app or by a specific button combination on the thermostat (refer to on-screen prompts).
- Antifreeze Function: Automatically activates heating if the room temperature drops below a set minimum (e.g., 5°C) to prevent pipes from freezing.
- Power-off Memory: Retains settings and programming even after a power outage.
- Temperature Compensation: Allows for calibration of the temperature sensor if there is a discrepancy between the displayed temperature and the actual room temperature.
- Hysteresis: Defines the temperature differential before the heating system switches on or off, preventing rapid cycling.
5. Maintenance
- Cleaning: Wipe the thermostat and receiver surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: If using battery power, replace all 3 AA batteries when the low battery indicator appears on the display. Ensure correct polarity.
- Firmware Updates: Periodically check the 'Smart Life' or 'Tuya Smart' app for any available firmware updates for your thermostat to ensure optimal performance and access to new features.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermostat not turning on. | No power (dead batteries or USB not connected/faulty). | Replace batteries or ensure USB power supply is working. |
| Heating system not responding. | Incorrect wiring of the receiver to the boiler; receiver not powered; thermostat not paired with receiver. | Verify receiver wiring (L/N for power, K1/K2 for boiler control). Ensure receiver has power. Re-pair thermostat and receiver (Section 3.5). |
| Wi-Fi connection fails. | Incorrect Wi-Fi password; 5GHz Wi-Fi network used; thermostat not in pairing mode; router too far. | Ensure correct 2.4GHz Wi-Fi network and password. Put thermostat in Wi-Fi pairing mode (flashing Wi-Fi icon). Move thermostat closer to router if necessary. |
| Inaccurate temperature reading. | Thermostat placed in an unsuitable location (direct sun, draft, near heat source); sensor calibration needed. | Relocate thermostat. Use temperature compensation feature in settings to calibrate the sensor. |
| Loss of pairing between thermostat and receiver after power cut. | Interference or temporary communication loss. | Re-pair the thermostat and receiver as described in Section 3.5. |
| Thermostat buttons unresponsive. | Child lock activated; device malfunction. | Deactivate child lock (refer to thermostat display or app). If issue persists, contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | BEOK CONTROLS |
| Model | R6XWIFI |
| Controller Type | Amazon Alexa, Google Assistant, Voice Control |
| Special Functions | Remote Control, Voice Control, Programmable, Antifreeze, Child Lock, Battery/USB Power |
| Product Specific Uses | Heating |
| Temperature Control Type | Smart/Remote |
| Connectivity Technology | Wi-Fi (2.4GHz) |
| Power Source | Battery Powered (3xAA, not included), USB Powered (Type-C cable included) |
| Product Weight | 400 Grams |
| Voltage | 15 Volts (Thermostat), 220V AC (Receiver) |
| Display Type | Digital |
| Mounting Type | Wall Mount |
| Backlight | Yes |
| Material | Plastic |
8. Warranty and Support
BEOK CONTROLS is committed to providing high-quality products and customer satisfaction. For warranty information, please refer to the documentation included with your purchase or contact your retailer.
If you encounter any issues or have questions regarding the installation, operation, or features of your R6XWIFI thermostat, please contact BEOK CONTROLS customer support. You can often find contact details on the official BEOK CONTROLS website or through the 'Smart Life' / 'Tuya Smart' app support section.
Electronic copies of manuals in various languages may be available upon request from customer support.