Banpresto Oshi no Ko Ai Figure Instruction Manual

1. Introduction

Thank you for purchasing the Banpresto Oshi no Ko Ai Figure. This collectible figure captures Ai in a dynamic pose, standing approximately 7.9 inches tall. This manual provides essential information for the proper setup, care, and maintenance of your figure to ensure its longevity and display quality.

Image 1.1: Front view of the Banpresto Oshi no Ko Ai figure on its display stand.

2. Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

This product is intended for collectors aged 15 years and up. Keep out of reach of small children due to small components that may pose a choking hazard. Handle with care to avoid accidental damage or injury.

3. Package Contents

Before proceeding with assembly, please verify that all components are present in the package:

• Oshi No Ko - Ai Figure
• Display Stand

Image 3.1: The figure shown alongside its original packaging, illustrating the typical contents.

4. Setup and Assembly

The Banpresto Oshi no Ko Ai figure requires minimal assembly. Follow these steps to properly set up your figure:

1. Carefully remove the figure and the display stand from their packaging.
2. Locate the peg on the display stand and the corresponding hole on the figure's foot.
3. Gently align the figure's foot with the peg on the stand. Apply light, even pressure to securely attach the figure to the stand. Avoid excessive force to prevent damage to the figure or stand.
4. Ensure the figure is stable and stands upright on the base.

5. Care and Maintenance

To preserve the quality and appearance of your Banpresto Oshi no Ko Ai figure, adhere to the following care guidelines:

• Cleaning: Use a soft, dry cloth or a soft brush to gently remove dust. For stubborn dirt, lightly dampen a cloth with water and wipe carefully, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the paint and finish.
• Handling: Always handle the figure by its base or sturdy parts. Avoid touching delicate areas such as hair, accessories, or thin limbs to prevent breakage.
• Display Environment: Display the figure away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to these conditions can cause discoloration, warping, or material degradation.
• Storage: If storing the figure, keep it in its original packaging or a protective container in a cool, dry place.

Image 5.1: A detailed view of the figure's face and upper body, highlighting areas that require careful cleaning and handling.

6. Troubleshooting

This section addresses common concerns you might encounter with your figure.

Figure is unstable on the stand:

• Ensure the peg on the stand is fully inserted into the hole on the figure's foot.
• Check for any debris in the peg hole that might prevent a secure fit.
• Verify that the stand is placed on a flat, stable surface.

Minor dust accumulation:

• Use a soft, dry brush (such as a clean makeup brush or a dedicated figure brush) to gently remove dust from crevices and surfaces.
• Avoid using compressed air directly, as it can sometimes dislodge small parts or damage delicate paintwork.

7. Specifications

8. Warranty and Support

This Banpresto figure is an officially licensed Bandai Spirits product. For customers in the U.S. Markets, items shipped from within North America by authorized U.S. Retailers are distributed by Bandai Namco. The product box will feature a Bandai Namco warning label, which confirms authenticity and eligibility for product support assistance within the United States.

For inquiries regarding product support or authenticity verification, please refer to the contact information provided on the Bandai Namco warning label or visit the official Bandai Namco website for customer service details.