KEDIERS C770 Mini Mid-Tower PC Gaming Case User Manual

1. Introduction

Thank you for choosing the KEDIERS C770 Mini Mid-Tower PC Gaming Case. This manual provides detailed instructions for the assembly, operation, and maintenance of your new PC case. The C770 is designed to offer excellent compatibility and cooling performance for your gaming setup, featuring two 4mm thick tempered glass panels and seven pre-installed ARGB fans.

Image 1.1: Front view of the KEDIERS C770 PC Gaming Case, showcasing its tempered glass panels and vibrant purple ARGB fans.

2. Safety Information

Please read these safety instructions carefully before installation and operation to prevent damage to the product or injury to yourself.

• Always disconnect power from all components before installing or removing any parts.
• Handle tempered glass panels with care to avoid breakage.
• Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) when handling internal components.
• Keep the case away from water, moisture, and extreme temperatures.
• Ensure proper ventilation around the case to prevent overheating.

3. Package Contents

Verify that all items are present in the package:

• KEDIERS C770 PC Gaming Case
• 7 x 120mm ARGB Fans (pre-installed)
• Accessory Box (screws, cable ties, standoffs, user manual)

4. Components Overview

The KEDIERS C770 case features a robust design with ample space for high-performance components and efficient cooling.

4.1. I/O Panel

The front I/O panel provides convenient access to essential ports:

• 2 x USB 2.0 Ports
• 1 x USB 3.0 Port
• 1 x HD Audio Jack (Headphone/Microphone Combo)
• Power Button
• Reset Button

4.2. Tempered Glass Panels

The case is equipped with two 4mm thick tempered glass panels on the front and side, offering a clear view of your internal components and ARGB lighting.

Image 4.1: The KEDIERS C770 case highlighting its fully transparent tempered glass panels, allowing for a complete view of the internal hardware.

4.3. Cooling System

The C770 comes with seven pre-installed 120mm ARGB fans, ensuring optimal airflow and vibrant lighting effects. The case supports additional fan configurations and radiator installations for enhanced cooling.

Image 4.2: Diagram illustrating the high-performance airflow design of the KEDIERS C770 case, with air intake from the bottom and side, and exhaust from the top.

5. Setup and Installation

Follow these steps to install your components into the KEDIERS C770 case.

5.1. Preparing the Case

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws.
2. Lay the case on its side on a flat, stable surface.

5.2. Motherboard Installation

The C770 supports Micro ATX and Mini-ITX motherboards.

1. Install the I/O shield into the motherboard tray opening from the inside of the case.
2. Align your motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard with the appropriate screws from the accessory box.

Image 5.1: Diagram showing the compatible motherboard sizes (ITX and M-ATX) and fan/radiator mounting points within the KEDIERS C770 case.

5.3. Power Supply Unit (PSU) Installation

1. Locate the PSU mounting area (top mount).
2. Slide the PSU into position and secure it with screws from the rear of the case.

5.4. Storage Drive Installation

The case provides rear bays for 1x 3.5'' HDD and 1x 2.5'' SSD.

1. Mount your 3.5'' HDD and 2.5'' SSD into the designated drive bays using the provided screws.
2. Connect the necessary power and data cables to your drives.

Image 5.2: Detailed view of the KEDIERS C770 case dimensions and the location of the HDD and SSD drive bays for storage installation.

5.5. Cable Management

Utilize the reasonable back hole design and detachable memory cable box for neat cable routing. This improves airflow and aesthetics.

1. Route all cables (power, data, front panel) through the designated cutouts to the rear of the motherboard tray.
2. Use cable ties to bundle and secure cables, keeping them tidy and out of the airflow path.

5.6. Connecting ARGB Fans

The seven pre-installed ARGB fans are typically connected to a fan hub or directly to your motherboard's ARGB headers. Refer to your motherboard manual for specific ARGB header locations and software control.

1. Ensure all fan power cables are connected to the fan hub or appropriate fan headers on the motherboard.
2. Connect the ARGB cables from the fans to the ARGB controller or motherboard ARGB headers.

6. Operating Instructions

6.1. Powering On Your System

1. Once all components are installed and cables are connected, replace the side panel.
2. Connect your monitor, keyboard, mouse, and power cable to the PSU.
3. Flip the power switch on the PSU to the 'ON' position.
4. Press the power button on the front I/O panel of the case to start your system.

6.2. ARGB Fan Control

The ARGB fans can be controlled via your motherboard's RGB software (if connected to ARGB headers) or through a dedicated ARGB controller (if included with the fan hub). Refer to your motherboard or controller manual for specific instructions on changing lighting modes and colors.

7. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your PC components.

• Dust Cleaning: Periodically clean dust filters and internal components using compressed air. Dust accumulation can hinder airflow and lead to overheating.
• Exterior Cleaning: Wipe the exterior of the case and tempered glass panels with a soft, damp cloth. Avoid abrasive cleaners that may scratch the surfaces.
• Fan Inspection: Check fan blades for dust buildup and ensure they spin freely.

8. Troubleshooting

If you encounter issues with your KEDIERS C770 case, refer to the following common problems and solutions:

9. Specifications

Detailed technical specifications for the KEDIERS C770 PC Gaming Case:

10. Warranty and Support

KEDIERS products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official KEDIERS website. If you require technical assistance or have questions not covered in this manual, please contact KEDIERS customer support.

KEDIERS Customer Support: Please refer to the contact information provided on the KEDIERS official website or your purchase documentation.