Introduction
Thank you for choosing the Mama Store Atena Reversible Wall Cabinet. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning installation and retain them for future reference.
Image: The Atena cabinet with its door open, revealing two internal glass shelves. The cabinet has a white oak finish.
Safety Information
- Always ensure the wall is suitable for mounting and can support the weight of the cabinet and its contents.
- Use appropriate tools and safety gear during installation.
- Keep small parts and packaging materials away from children.
- Do not overload the shelves. Distribute weight evenly.
- Regularly check wall fixings for security.
Package Contents
The Mama Store Atena Wall Cabinet comes pre-assembled. Please verify that all components are present and undamaged before proceeding with installation.
- 1 x Atena Wall Cabinet (pre-assembled)
- 2 x Internal Glass Shelves
- 1 x Wall Mounting Kit (includes necessary hardware)
- 1 x Instruction Manual (this document)
Setup and Installation
The cabinet is designed for wall mounting. It comes pre-assembled, simplifying the installation process. The door is reversible, allowing you to choose left or right opening during installation.
- Choose Location: Select a suitable wall location, ensuring there are no hidden pipes or electrical wires. The wall must be strong enough to support the cabinet's weight.
- Mark Drilling Points: Hold the cabinet against the wall at the desired height and use a pencil to mark the drilling points for the wall mounting brackets. Ensure the marks are level.
- Drill Holes: Using an appropriate drill bit for your wall type, drill holes at the marked points.
- Insert Wall Plugs: Insert the provided wall plugs into the drilled holes.
- Attach Mounting Brackets: Secure the wall mounting brackets (if separate) to the wall using the screws provided in the kit.
- Mount Cabinet: Carefully lift the cabinet and align its pre-installed mounting points with the wall brackets. Secure the cabinet to the wall according to the specific instructions in the mounting kit.
- Install Glass Shelves: Place the two glass shelves onto the internal supports at your desired height.
- Adjust Door (if necessary): If you wish to reverse the door opening direction, follow the specific instructions provided with the hinges. This typically involves unscrewing the hinges, flipping the door, and re-attaching them to the opposite side.
Image: The Atena cabinet mounted on a wall in a bathroom, demonstrating its aesthetic integration.
Operating Instructions
The Atena cabinet features a convenient push-and-pull opening system for its door.
- Opening the Door: Gently press on the center of the door. The push-to-open mechanism will release the latch, allowing the door to spring open slightly. Then, pull the door fully open.
- Closing the Door: Push the door firmly until you hear a click, indicating that the push-to-open latch has engaged and secured the door.
- Adjusting Shelves: The glass shelves can be repositioned by carefully lifting them out of their supports and placing them into alternative support slots inside the cabinet. Ensure shelves are securely seated before placing items on them.
Maintenance
To ensure the longevity and appearance of your Mama Store Atena cabinet, follow these simple maintenance guidelines:
- Cleaning: Clean the cabinet surfaces with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the white oak finish.
- Glass Shelves: Clean glass shelves with a standard glass cleaner and a soft cloth.
- Hardware: Periodically check all screws and fittings, especially the wall mounting hardware, and tighten them if necessary to ensure stability.
- Spills: Wipe up any spills immediately to prevent staining or damage to the wood finish.
Troubleshooting
If you encounter any issues with your cabinet, refer to the following common solutions:
- Door not closing properly: Check if the push-to-open mechanism is obstructed. Ensure the door is aligned correctly with the cabinet frame. Adjust hinges if necessary (refer to hinge manufacturer's instructions if provided).
- Cabinet feels wobbly: Re-check all wall mounting screws and ensure they are securely tightened. Verify that the wall plugs are properly seated in the wall.
- Scratches or minor damage: For minor scratches on the white oak finish, touch-up pens or furniture repair kits designed for similar finishes may be used.
Specifications
Image: Dimensional diagram of the Atena cabinet, illustrating its height, depth, and width.
| Model Number | AT004WHOAK |
| Brand | Mama Store |
| Dimensions (L x D x H) | 30 cm x 22 cm x 71 cm |
| Weight | 9 kg |
| Material | Engineered Wood (Chipboard), Oak Wood Exterior |
| Finish | White Oak |
| Door Type | Reversible, Push-and-Pull Opening |
| Internal Shelves | 2 x Glass Shelves |
| Assembly Required | No (Comes pre-assembled) |
| Installation Type | Wall Mounted |
| Care Instructions | Clean with a damp cloth |
| Made In | Italy |
Warranty and Support
Specific warranty information for the Mama Store Atena Reversible Wall Cabinet is not provided in this manual. For warranty details, product support, or to report any issues, please contact your retailer or visit the official Mama Store website. Please have your model number (AT004WHOAK) and purchase information ready when contacting support.
You can visit the Mama Store on Amazon: Mama Store on Amazon.it
