Universal LED Flash Strobe Controller Module

1. Product Overview

The Airshi LF-300B H13 LED Flash Strobe Controller is a compact and high-performance module designed to add a continuous strobe effect to various LED light accessories in motor vehicles, automobiles, and motorcycles. Constructed from durable ABS material, it offers excellent resistance to corrosion, salt spray, and heat, ensuring long-term stability and reliability.

This controller is engineered for easy installation and is compatible with a wide range of LED lamps, including single-color, 2-color, and 3-color types, making it suitable for LED headlights, fog lights, and small lights.

Image: Two Airshi LF-300B H13 LED Flash Strobe Controllers, showcasing their compact design and wiring.

2. Setup and Installation

The LF-300B H13 controller is designed for straightforward integration into your vehicle's lighting system. Ensure the vehicle's power is off before beginning installation to prevent electrical hazards.

Wiring Diagram:

The controller features an H13 connector type. Identify the input (R(+) and B(-)) and output (W(+) and B(-)) terminals on the controller. Connect the input side to your vehicle's power source (9-30V DC) and the output side to your LED lamp.

• Input (In): Connect to the vehicle's power supply.
• Output (Out): Connect to the LED lamp.

Ensure all connections are secure and properly insulated to prevent short circuits. The compact design allows for flexible placement within your vehicle's wiring harness.

Image: A single Airshi LF-300B H13 LED Flash Strobe Controller, providing a clear view of the input (R(+), V In, B(-)) and output (W(+), O Out, B(-)) terminals for wiring.

3. Operating Instructions

The LF-300B H13 controller operates based on a simple power cycle sequence to switch between steady light and strobe modes.

1. Normal Operation (Steady Light): Turn on the headlights or connected LED lights. The lights will remain steadily on.
2. Activate Strobe Mode: To activate the strobe mode, turn off the lights, then quickly turn them back on. The connected LED lights will begin to flash in a continuous strobe pattern.
3. Return to Normal Light: To return to normal steady light, turn off the lights again, then turn them on. The lights will revert to their steady-on state.

This controller is compatible with single-color, 2-color, and 3-color lamps, allowing for versatile lighting effects.

4. Maintenance

The Airshi LF-300B H13 LED Flash Strobe Controller is designed for durability and requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Regular Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure all connections remain secure.
• Cleanliness: Keep the controller module free from excessive dust, dirt, and moisture. If cleaning is necessary, use a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Environmental Protection: While the unit is designed with corrosion and heat resistance, avoid exposing it to extreme temperatures or direct water immersion beyond its intended use.
• Avoid Overloading: Ensure the connected LED lamps do not exceed the controller's maximum power rating of 50W. Overloading can lead to premature failure.

5. Troubleshooting

If you encounter issues with your LED Flash Strobe Controller, consider the following common troubleshooting steps:

• Lights Not Turning On:
  • Check all wiring connections to ensure they are secure and correctly connected (input to power, output to lamp).
  • Verify the power supply voltage is within the 9-30V range.
  • Test the LED lamp directly to ensure it is functional.
  • Check for any blown fuses in the vehicle's circuit.
• Strobe Mode Not Activating:
  • Ensure you are performing the power cycle (off, then quickly on) correctly to trigger the strobe mode.
  • Confirm the controller is receiving consistent power.
• Lights Flickering or Malfunctioning:
  • Inspect for loose or corroded connections.
  • Ensure the total wattage of the connected lamps does not exceed 50W.
  • Check for any damage to the controller's casing or wires.

If problems persist after following these steps, contact customer support for further assistance.

6. Specifications

7. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Airshi customer service directly. Keep your purchase receipt for warranty claims.