Generic Space Age Table Lamp Instruction Manual

Introduction

Thank you for purchasing the Generic Space Age Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions thoroughly before assembly and operation, and retain them for future reference.

Image Description: This image shows the Generic Space Age Table Lamp in its unlit state, featuring its distinctive amber glass UFO-shaped shade, white spherical globe, and chrome-finished metal base, resting on a dark wooden bedside table.

Important Safety Instructions

• Ensure the power supply voltage matches the lamp's requirements before plugging in.
• Do not operate the lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
• Unplug the lamp from the power outlet before cleaning or changing the light bulb.
• Do not immerse the lamp in water or any other liquid.
• Keep the lamp away from heat sources and direct sunlight.
• This lamp is intended for indoor use only.
• Use only the specified bulb type (E27 LED) to avoid overheating or damage.

Package Contents

Please check that all components are present and undamaged:

• Lamp Base with Stem
• Glass Lampshade (UFO shape)
• White Spherical Globe
• E27 LED Light Bulb
• Power Cord with Inline Switch (attached to base)

Setup and Assembly

Follow these steps to assemble your Space Age Table Lamp:

Image Description: This image displays a four-step assembly guide for the lamp. Step 1 shows a hand securing the lamp body to its base by turning it clockwise. Step 2 illustrates placing the amber glass lampshade onto the secured lamp body. Step 3 depicts installing the E27 LED light bulb into the socket within the lampshade. Step 4 shows a hand tightening the white spherical globe into the lampshade until it is stable.

1. Step 1: Secure the Lamp Body
   Place the metal base on a stable, flat surface. Secure the lamp body (the central stem with the bulb socket) by turning it clockwise into the base until it is firmly attached.
2. Step 2: Place Lampshade on Lamp Body
   Carefully place the glass lampshade (the amber, UFO-shaped component) onto the secured lamp body, ensuring it sits evenly.
3. Step 3: Install Light Bulb
   Screw the provided E27 LED light bulb into the socket located inside the lampshade. Turn clockwise until snug, but do not overtighten.
4. Step 4: Tighten Globe
   Place the white spherical globe over the installed bulb and into the lampshade opening. Turn it clockwise until it is stable and securely seated within the lampshade.

Operating Instructions

1. Connect to Power: Plug the power cord into a standard electrical outlet.
2. Turn On/Off: Locate the inline switch on the power cord. Press the switch to turn the lamp ON or OFF.
3. Light Effect: When illuminated, the lamp will produce a soft gradient effect, transitioning from warm amber to yellowish-orange through the glass lampshade.

Image Description: This image shows the Generic Space Age Table Lamp fully assembled and illuminated, casting a warm, soft gradient light. The amber glass shade glows with a yellowish-orange hue, demonstrating the lamp's operational light effect.

Maintenance

• Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the metal base and glass components with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Ensure the lamp is unplugged and cool before attempting to replace the bulb. Unscrew the spherical globe, then unscrew the old E27 bulb and replace it with a new E27 LED bulb. Reattach the globe.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the retailer's policy or contact the seller directly. Keep your purchase receipt for any warranty claims.