Introduction
Thank you for choosing the NB NOIZZYBOX Retro Buddy. This portable 3-band radio combines classic analog tuning with modern features like Bluetooth connectivity, USB, and TF card playback, along with an integrated torch light. This manual provides detailed instructions for safe and effective use of your device. Please read it thoroughly before operation and retain it for future reference.
Package Contents
- NB Retro Buddy Unit
- USB Charging Cable
- Wrist Band
Product Overview
Familiarize yourself with the various parts and controls of your Retro Buddy radio.
Image 1: Front view of the Retro Buddy radio, highlighting the speaker, frequency display, and tuning knob.
Image 2: Top panel controls, including Mode, Next, Previous, and Play/Pause buttons.
Image 3: Right side panel with Volume control (ON/OFF), TF Card slot, USB port, and DC 5V charging input.
Image 4: Left side panel featuring the Torch Light and the Mode Selector switch (SW/AM/FM/USB/Bluetooth).
Image 5: Rear panel with the extendable antenna and the Torch Light ON/OFF switch.
Setup
Initial Charging
Before first use, fully charge the Retro Buddy.
- Connect the supplied USB charging cable to the DC 5V port on the side of the radio (refer to Image 3).
- Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer USB port.
- The charging indicator light (if present, check product for specific behavior) will illuminate during charging.
- Allow approximately 2-3 hours for a full charge. Disconnect the cable once charging is complete.
Attaching the Wrist Band
Thread the included wrist band through the designated loop on the radio for secure carrying.
Operating Instructions
Power On/Off and Volume Control
- To turn the radio ON, rotate the Volume knob (refer to Image 3) clockwise until you hear a click.
- To adjust the volume, continue rotating the knob clockwise to increase, or counter-clockwise to decrease.
- To turn the radio OFF, rotate the Volume knob counter-clockwise until you hear a click.
Radio Operation (FM/AM/SW)
- Select Band: Use the Mode Selector switch on the left side (refer to Image 4) to choose between FM, AM, or SW bands.
- Extend Antenna: For optimal reception, fully extend the telescopic antenna located on the rear of the unit (refer to Image 5).
- Tune Station: Rotate the Analog Tuning Knob on the front right side (refer to Image 1) to scan for radio stations. The frequency display will indicate the current tuning position.
- Adjust Position: For better reception, you may need to slightly adjust the position of the radio or the antenna.
Bluetooth Operation
- Enter Bluetooth Mode: Set the Mode Selector switch (Image 4) to the "USB / Bluetooth" position. The radio will announce "Bluetooth Mode" or a similar audio cue, and an indicator light may flash.
- Pairing: On your smartphone or other Bluetooth-enabled device, search for available Bluetooth devices. Select "NB RETRO BUDDY" (or similar name) from the list.
- Connection: Once paired, the radio will confirm the connection with an audio cue. You can now play audio from your device through the Retro Buddy.
- Playback Control: Use the Play/Pause, Next, and Previous buttons on the top panel (refer to Image 2) to control media playback.
USB / TF Card Playback
- Insert Media: Insert a USB drive into the USB port or a TF (MicroSD) card into the TF card slot on the right side of the radio (refer to Image 3). Ensure the media contains compatible audio files (e.g., MP3).
- Select Mode: Set the Mode Selector switch (Image 4) to the "USB / Bluetooth" position. The radio should automatically detect and begin playing audio from the inserted media. If not, press the "Mode" button (Image 2) to cycle through available input sources until USB or TF card mode is active.
- Playback Control: Use the Play/Pause, Next, and Previous buttons on the top panel (refer to Image 2) to control media playback.
Torch Light Operation
- To turn the torch light ON, slide the Torch Light switch on the rear panel (refer to Image 5) to the "ON" position.
- To turn the torch light OFF, slide the switch to the "OFF" position.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the radio. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Storage: When not in use for extended periods, store the radio in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the unit regularly, even if not in constant use.
- Antenna: Handle the telescopic antenna gently to prevent bending or breakage. Retract it when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not turn on. | Battery is discharged. | Charge the radio using the supplied USB cable. |
| Poor radio reception. | Antenna not extended; weak signal; interference. | Fully extend the telescopic antenna. Try repositioning the radio. Move away from electronic devices that may cause interference. |
| Bluetooth not connecting. | Radio not in Bluetooth mode; device not discoverable; already connected to another device. | Ensure the mode switch is set to "USB / Bluetooth". Make sure Bluetooth is enabled on your device and it's in pairing mode. Disconnect from other Bluetooth devices. |
| USB/TF card not playing. | Incorrect mode; unsupported file format; corrupted media. | Ensure the mode switch is set to "USB / Bluetooth" and press the "Mode" button to cycle inputs. Check if audio files are in a supported format (e.g., MP3). Try another USB drive or TF card. |
| Torch light not working. | Switch is off; battery is low. | Ensure the torch light switch is in the "ON" position. Charge the radio. |
Specifications
| Brand | NB NOIZZYBOX |
| Model Name | NOIZZYBOX Retro Buddy |
| Item Model Number | NB RETRO BUDDY |
| Radio Bands Supported | FM, AM, SW |
| Tuner Technology | FM AM SW Analog tuning Radio |
| Connectivity Technology | Bluetooth 5.0, USB, TF Card |
| Speakers Maximum Output Power | 5 Watts |
| Power Source | Battery Powered |
| Battery Type | Lithium Ion (1 included) |
| Material | ABS with PU |
| Product Dimensions | 8L x 6W x 11H Centimeters |
| Item Weight | 0.25 g |
| Special Features | 3 Band Radio (FM AM SW), Bluetooth 5.0, Bright Torch light with Wrist Band, Portable, USB and TF card support. |
Safety Information
- Do not expose the unit to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the unit to strong impacts.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Use only the provided USB charging cable or a compatible 5V USB charger.
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or contact NB NOIZZYBOX customer service directly.
Manufacturer: NRJ VENTURES
Contact Information: NRJ Ventures, Prince Plaza, Pantheon Road, Egmore, Chennai 600008 - 9566008000/9382680408
You can also visit the official NB NOIZZYBOX Store on Amazon for more information and product updates.