pangshi L16 60-inch Phone Tripod & Selfie Stick User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your pangshi L16 60-inch Phone Tripod & Selfie Stick. Please read this manual thoroughly before operating the device and retain it for future reference.

Image 1: Overview of the pangshi L16 Phone Tripod & Selfie Stick and its remote control.

2. Package Contents

Verify that all items are present in your package:

• 1 x L16 60" Selfie Stick Tripod
• 1 x Detachable Wireless Remote
• 1 x User Manual (this document)

3. Product Features

The pangshi L16 combines the functionality of a selfie stick, phone tripod stand, and handheld phone stabilizer. Key features include:

• All-in-One Design: Functions as a selfie stick, tripod, and handheld stabilizer.
• Extendable Pole: Made of aluminum alloy, extending from 13.5 inches to 60 inches.
• 360° Rotating Head: Allows for horizontal 360° rotation in the clamp and vertical 270° rotation in the connector.
• Balance Handle: Equipped for steady and smooth shooting.
• Wireless Remote: Detachable Bluetooth remote shutter for capturing photos and videos from up to 10m/30ft away.
• Reinforced Tripod Base: Features non-slip silicone foot pads for stability.
• Wide Compatibility: Universal phone holder (2.55-3.93 inches width) fits most 4.0"-7.0" smartphones. Includes a 1/4 inch screw mount for digital cameras, camcorders, sports cameras, webcams, and ring lights.
• Portable Design: Folds to 13.5 inches and weighs 420g for easy transport.

Image 2: Key components and construction of the tripod and selfie stick.

Image 3: Height adjustment capabilities of the device.

4. Product Specifications

5. Setup Guide

5.1 Unfolding the Tripod/Selfie Stick

1. Hold the handle firmly.
2. Gently pull the bottom part of the handle downwards to release the tripod legs.
3. Spread the three legs outwards until they form a stable base.
4. To extend the pole, pull the top section upwards. Each section will lock into place. Adjust to your desired height.

5.2 Attaching Your Device

The device supports both smartphones and other cameras via a 1/4 inch screw mount.

For Smartphones:

1. Open the phone clamp by pulling the top part upwards.
2. Carefully insert your smartphone into the clamp, ensuring it is securely held. The clamp accommodates phones between 2.55 and 3.93 inches in width.

For Cameras/Accessories (e.g., GoPro, Digital Camera, Ring Light):

1. If a phone clamp is attached, remove it by unscrewing the 1/4 inch screw.
2. Align your camera or accessory with the 1/4 inch screw on the top of the tripod/selfie stick.
3. Rotate your device clockwise onto the screw until it is securely fastened.

Image 4: Device compatibility and mounting options.

5.3 Pairing the Wireless Remote

1. Locate the detachable wireless remote control. It is typically stored in a slot on the handle.
2. Press and hold the power button on the remote until the indicator light starts blinking, indicating it is in pairing mode.
3. On your smartphone, go to Bluetooth settings.
4. Search for available devices and select the device named 'AB Shutter3' or similar.
5. Once paired, the indicator light on the remote will stop blinking and remain solid.
6. The remote is now ready to use for capturing photos and starting/stopping videos.

6. Operating Instructions

6.1 Using as a Selfie Stick

1. Ensure the tripod legs are folded and secured within the handle.
2. Extend the pole to your desired length.
3. Hold the handle and position your device for the shot.
4. Use the wireless remote to capture photos or start video recording.

6.2 Using as a Tripod Stand

1. Unfold the tripod legs and ensure they are fully extended and stable on a flat surface.
2. Extend the pole to the required height.
3. Adjust the device angle as needed.
4. Use the wireless remote to capture content without touching the device, minimizing shake.

Image 5: Demonstrations of selfie stick, floor tripod, and desk tripod modes.

6.3 Adjusting Angles and Orientation

1. Horizontal Rotation: The phone clamp allows for 360° horizontal rotation. Simply rotate your device within the clamp to switch between landscape and portrait orientation.
2. Vertical Tilt: The connector joint allows for 270° vertical rotation. Adjust the angle by loosening the knob or lever on the joint, tilting your device, and then tightening to secure.
3. Balance Handle: Utilize the balance handle for additional stability and smooth panning during video recording. Rotate the handle 360 degrees horizontally for steady shots.

Image 6: Demonstrating 360° horizontal and 270° vertical rotation capabilities.

Image 7: Using the 360° rotating balance handle for enhanced stability.

6.4 Using the Wireless Remote

Once paired, the remote can be used to trigger your device's camera shutter or start/stop video recording. Ensure the remote is within 10m/30ft of your device for optimal performance.

Video 1: Demonstration of the pangshi L16 60-inch Phone Tripod & Selfie Stick in various usage scenarios, including setup, selfie mode, tripod mode, and remote control operation.

7. Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Storage: When not in use, fold the tripod/selfie stick completely and store it in a dry, cool place away from direct sunlight.
• Remote Battery: The wireless remote uses a Lithium Metal battery. If the remote stops responding, the battery may need replacement. Refer to the remote's compartment for battery type and replacement instructions.
• Avoid Overloading: Do not attach devices heavier than recommended specifications to prevent damage or instability.

8. Troubleshooting

• Remote Not Pairing:
  • Ensure the remote is charged or has a fresh battery.
  • Make sure Bluetooth is enabled on your smartphone.
  • Restart both your smartphone and the remote, then attempt pairing again.
  • If previously paired, try 'forgetting' the device in your phone's Bluetooth settings and re-pairing.
• Tripod Instability:
  • Ensure all three legs are fully extended and locked into position.
  • Place the tripod on a flat, stable surface.
  • Do not extend the pole to its maximum height if the surface is uneven or windy.
  • Ensure your device is securely clamped and balanced.
• Pole Not Extending/Retracting Smoothly:
  • Check for any obstructions or debris in the telescopic sections.
  • Apply gentle, even pressure when extending or retracting. Avoid forcing the pole.

9. Warranty and Support Information

For warranty inquiries or technical support, please refer to the contact information provided with your purchase or visit the official pangshi website. Keep your proof of purchase for warranty claims.