Smiling Shark M-2 Fabric Shaver Instruction Manual

Introduction

Thank you for choosing the Smiling Shark M-2 Fabric Shaver. This device is designed to efficiently remove lint, fuzz, and pilling from various fabrics, restoring their fresh appearance. Featuring 6-leaf stainless steel blades, a 3-speed regulation system, and an LED display for real-time battery monitoring, this portable and rechargeable fabric shaver is a versatile tool for maintaining your clothes, furniture, and other textiles.

Important Safety Instructions

• Read all instructions before using the appliance.
• Keep the device away from water or other liquids.
• Do not use on wet fabrics. Ensure fabrics are dry before use.
• Keep out of reach of children.
• Do not press the shaver head too hard against the fabric to avoid damage.
• Always ensure the protective cap is securely in place when not in use or when cleaning. The device has a safety feature that prevents operation if the cap is removed.
• Unplug the device before cleaning or when not in use for extended periods.
• Use only the provided charging cable.
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.

Package Contents

Please check the package to ensure all items are present:

• 1 x Smiling Shark M-2 Fabric Shaver
• 2 x Replacement 6-Leaf Blades
• 1 x USB-C Charging Cable
• 1 x Cleaning Brush
• 1 x User Manual

Product Overview

The M-2 Fabric Shaver is designed for ease of use and effective lint removal. Key components include:

• Stainless Steel Razor Net: Protects fabrics while allowing lint to be cut.
• 6-Leaf Stainless Steel Blades: Sharp and durable for efficient lint removal.
• Suction System: Draws cut lint into the storage bin.
• Storage Bin: Collects removed lint for easy disposal.
• On/Off/Speed Switch: Controls power and adjusts between 3 speed levels.
• LED Display: Shows battery percentage and current speed level.
• USB-C Charging Port: For convenient recharging.

Setup

Charging the Device

1. Connect the provided USB-C charging cable to the charging port on the device.
2. Plug the other end of the USB-C cable into a compatible USB power adapter (not included) or a USB port on a computer.
3. The LED display will show the charging status. A full charge typically takes about 3 hours.
4. The device can be used while charging, if necessary.

Installing/Replacing Blades

1. Ensure the device is turned off and unplugged.
2. Gently twist and remove the outer protective cap (razor net).
3. Carefully remove the old blade assembly.
4. Place a new 6-leaf blade assembly onto the spindle, ensuring it sits correctly.
5. Reattach the outer protective cap by twisting it clockwise until secure.

Operating Instructions

1. Prepare the Fabric: Lay the fabric flat on a hard, smooth surface. Stretch the fabric taut to ensure a smooth surface for shaving.
2. Turn On: Press the On/Off/Speed switch to turn on the device. The LED display will illuminate, showing the battery percentage and default speed (LV1).
3. Adjust Speed: Press the On/Off/Speed switch repeatedly to cycle through the 3 available speeds (LV1: 6500r/min, LV2: 7500r/min, LV3: 8500r/min). Choose a lower speed for delicate fabrics and a higher speed for tougher materials or stubborn pilling.
4. Begin Shaving: Gently glide the shaver head over the fabric surface in small, circular motions or straight strokes. Avoid pressing too hard to prevent damage.
5. Monitor Progress: Observe the fabric as you work. The device effectively removes lint and fuzz, leaving the fabric smooth.
6. Turn Off: Once finished, press the On/Off/Speed switch until the device turns off.

Suitable Fabric Types

This fabric shaver is versatile and can be used on a variety of materials, including but not limited to:

• Sweaters (wool, cashmere, acrylic blends)
• Blankets and throws
• Upholstery (sofas, chairs)
• Curtains
• Clothing (t-shirts, dresses, socks)
• Plush toys

Maintenance

Cleaning the Lint Container

1. Ensure the device is turned off.
2. Gently pull off the detachable lint container from the main body of the shaver.
3. Empty the collected lint into a trash bin.
4. Use the provided cleaning brush to remove any remaining lint or debris from the container and around the blades.
5. Reattach the lint container securely.

Cleaning the Blades and Razor Net

• After removing the lint container, gently twist off the stainless steel razor net.
• Use the cleaning brush to carefully remove any lint or threads caught on the blades or inside the razor net.
• Do not use water to clean the blades or internal components.
• Reattach the razor net securely.

Troubleshooting

Specifications

• Model: M-2
• Blades: 6-Leaf Stainless Steel
• Speed Settings: 3 (6500r/min, 7500r/min, 8500r/min)
• Display: LED (Battery Percentage, Speed Level)
• Charging Time: Approximately 3 hours for full battery
• Battery: 1 Lithium Ion (included)
• Dimensions: 4.92 x 8.66 x 3.46 inches
• Item Weight: 8.6 ounces
• Material: Metal, Plastic
• Operation Mode: Automatic

Product Videos

Warranty and Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Smiling Shark website. Our multilingual service team aims to reply within 24 hours to ensure your satisfaction.