Stromberg's Rcom 20 Do Pro Incubator User Manual

Introduction

The Stromberg's Rcom 20 Do Pro Incubator is designed for efficient and reliable egg incubation, providing a controlled environment for successful hatching. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your incubator to ensure optimal performance.

Image: The Rcom 20 Do Pro Incubator, showing its clear lid and capacity for multiple eggs. This image illustrates the overall design and egg placement area.

Setup

1. Unpacking: Carefully remove all components from the packaging. Verify that all parts are present according to the packing list. Retain original packaging for future storage or transport.
2. Placement: Position the incubator on a stable, level surface away from direct sunlight, drafts, and extreme temperature fluctuations. Ensure adequate ventilation around the unit.
3. Water Reservoir: Locate the water reservoir. Fill it with distilled water to the recommended level. This maintains humidity during incubation. Refer to the specific markings on the incubator for the correct fill line.
4. Power Connection: Connect the power cord to the incubator and then plug it into a grounded electrical outlet. The unit will power on and display initial settings.
5. Pre-heating: Allow the incubator to pre-heat for at least 2-4 hours before placing eggs inside. This stabilizes the internal temperature and humidity.

Operating Instructions

Controls and Display

The Rcom 20 Do Pro features a digital display and control buttons for precise management of incubation parameters. Familiarize yourself with the display icons and button functions before operation.

• Temperature Display: Shows the current internal temperature.
• Humidity Display: Indicates the current internal humidity level.
• Set Button: Used to enter setting mode for temperature, humidity, and turning intervals.
• Up/Down Buttons: Adjust values when in setting mode.

Setting Incubation Parameters

1. Temperature: Press the 'Set' button until the temperature setting flashes. Use the Up/Down buttons to adjust to the desired temperature (e.g., 99.5°F for chicken eggs). Press 'Set' again to confirm.
2. Humidity: Press 'Set' until the humidity setting flashes. Adjust to the desired humidity (e.g., 45-55% for initial incubation, 65-75% for hatching) using the Up/Down buttons. Confirm with 'Set'.
3. Egg Turning: The Rcom 20 Do Pro features automatic egg turning. Ensure the turning mechanism is engaged. The default turning interval is typically every 1-2 hours. Consult the specific model's manual for adjusting this interval if necessary.

Egg Placement

Carefully place fertile eggs into the egg trays. Ensure eggs are positioned correctly according to the tray design to allow for proper turning. Do not overcrowd the incubator.

Monitoring and Hatching

Regularly monitor the temperature and humidity levels displayed on the unit. Adjust water levels as needed to maintain humidity. During the final 3 days before hatching (lockdown), increase humidity and cease egg turning. Do not open the incubator unnecessarily during this period.

Maintenance

Proper maintenance ensures the longevity and efficiency of your incubator.

• Cleaning: After each hatch, unplug the incubator and allow it to cool. The body of the incubator comes apart for easy cleaning. Disassemble removable parts and clean them with a mild disinfectant solution. Wipe down all surfaces. Ensure all parts are completely dry before reassembly or storage.
• Water Reservoir: Regularly clean the water reservoir to prevent mold or bacterial growth. Use distilled water to minimize mineral buildup.
• Sensor Care: Keep temperature and humidity sensors clean and free from debris to ensure accurate readings. Do not use abrasive cleaners on sensors.
• Storage: When not in use, store the incubator in a clean, dry place, protected from dust and extreme temperatures.

Troubleshooting

Specifications

• Model: Rcom 20 Do Pro
• Manufacturer: Stromberg's
• ASIN: B0CJMZR6K5
• Capacity: Approximately 20 standard chicken eggs (varies by egg size)
• Features: Automatic egg turning, digital temperature and humidity control, easy-clean design.

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Stromberg's website. Keep your proof of purchase for warranty claims.

If you encounter issues not covered in this troubleshooting guide or require further assistance, please contact Stromberg's customer support. Contact details can typically be found on the manufacturer's website or on your product packaging.

For more information and products, visit the Stromberg's Store on Amazon.