Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CT Copper Tailor VH50 Scalloped Copper Island Mount Range Hood. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. Keep this manual for future reference.
The CT Copper Tailor VH50 range hood is a handcrafted appliance featuring genuine 16-gauge copper construction. It is designed to efficiently remove smoke, grease, odors, steam, and heat from your kitchen with its powerful 1150 CFM exhaust fan, LED lighting, and dishwasher-safe baffle filters.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel-burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Ducted fans must always be vented to the outdoors.
- This unit is UL-listed and ETL approved for your safety and protection.
CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
What's in the Box
Your CT Copper Tailor Range Hood package includes the following components:
- Copper Range Hood Cover
- Range Hood Insert
- Baffle Filters
- Grease Tunnel
- User Manual (this document)
Setup and Installation
Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified professional.
- Pre-Installation Check: Verify all components are present and undamaged. Refer to the provided CAD drawing for precise measurements and structural requirements.
- Mounting Location: This is an island mount range hood. Ensure the ceiling structure can support the weight of the unit and that there is adequate clearance above your cooking surface as per local building codes and manufacturer recommendations.
- Ducting: The unit requires external ducting. Ensure the ductwork is properly sized and sealed to maximize airflow efficiency.
- Electrical Connection: Connect the range hood to a dedicated 120 Volt electrical circuit. All wiring must comply with local electrical codes.
- Hood Assembly: Carefully mount the range hood cover and insert according to the detailed instructions in the separate installation guide (if provided) or the CAD drawing.
- Filter Installation: Install the baffle filters into the range hood insert.
A CAD drawing will be sent to you once an order is placed to assist with precise installation planning.
Image: Dimensions of the CT Copper Tailor Scalloped Copper Island Mount Range Hood. The image shows the width as 42 inches, depth as 27 inches, and height as 36 inches.
Image: Front-left view of the CT Copper Tailor Scalloped Copper Island Mount Range Hood, showcasing its unique scalloped design and smooth penny patina finish.
Operating Instructions
The range hood is equipped with push-button controls for easy operation of the fan and LED lights.
Image: Close-up view of the range hood's control panel, showing the push buttons for fan speed and LED lights. Also highlights removable stainless steel baffle filters, adjustable LED lights, and fingerprint-resistant surface.
- Power On/Off: Press the power button to turn the unit on or off.
- Fan Speed Adjustment: The range hood features 4 fan speeds. Use the speed control buttons to select the desired ventilation level. Higher speeds are recommended for heavy cooking, while lower speeds are suitable for light cooking or maintaining air quality.
- LED Lights: Press the light button to turn the LED lights on or off. The LED lights provide illumination for your cooking area.
- Delay Shutdown: This feature allows the fan to continue running for a set period after cooking to ensure all odors and steam are cleared, then automatically shuts off. Refer to the specific controls on your unit for setting the delay time.
Image: Internal view of the range hood's powerful ventilation system, illustrating how it sucks up odors, traps grease, and removes heat from the kitchen environment.
Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
- Cleaning Baffle Filters: The stainless steel baffle filters are dishwasher-safe. Remove them regularly (e.g., monthly, depending on cooking frequency) and wash them in your dishwasher or by hand with hot, soapy water. Ensure they are completely dry before re-installing.
- Cleaning Copper Surface: The copper hood cover has a clear lacquer coating to prevent tarnishing. Clean the exterior with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the lacquer finish.
- Grease Tunnel: Periodically check and clean the grease tunnel to prevent buildup.
- LED Lights: If an LED light needs replacement, consult a qualified technician or contact customer support.
Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not operate | No power supply; circuit breaker tripped; wiring issue. | Check power connection, reset circuit breaker. If issue persists, consult a qualified electrician. |
| Poor suction performance | Clogged filters; improper ducting; fan motor issue. | Clean or replace baffle filters. Inspect ductwork for obstructions or leaks. Ensure fan is set to appropriate speed. |
| Excessive noise | Loose components; fan obstruction; motor issue. | Check for loose screws or parts. Ensure no objects are obstructing the fan blades. |
| Lights not working | Bulb failure; wiring issue. | Check if LED lights are properly seated. If necessary, consult a technician for replacement. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VH50SPI4236 |
| Product Dimensions | 27"D x 42"W x 36"H |
| Material | 16 Gauge Copper |
| Mounting Type | Island Mount |
| Air Flow Capacity | 1150 Cubic Feet Per Minute (CFM) |
| Number of Speeds | 4 |
| Controls Type | Push Button |
| Light Source Type | LED |
| Filter Type | Baffle (Dishwasher-safe) |
| Noise Level | 69 Decibels |
| Voltage | 120 Volts |
| Wattage | 240.00 |
| Special Features | Delay Shutdown, Oil Collector, Powerful Vent |
| Certifications | UL-listed, ETL approved |
Warranty and Support
CT Copper Tailor stands behind the quality of its products.
- Range Hood Insert Warranty: A one-year parts warranty is provided for the range hood insert.
- Hood Cover Warranty: A lifetime warranty is provided for the copper hood cover.
- Customization: Size and design customization options are available upon request.
- Ventilation Options: Ductless and remote blower ventilation system options are also available if needed.
- Contact Support: For any questions, technical assistance, or warranty claims, please contact CT Copper Tailor customer service. Refer to your purchase documentation for contact details.
Note: Minor color and texture variances in the copper kitchen hood are inherent to the handcrafted nature of the product and are not considered defects.