1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Aquaguard Marvel NXT Water Purifier. Please read these instructions carefully before using the appliance and retain them for future reference. This water purifier is designed to provide safe and healthy drinking water through its advanced purification technologies.
2. Product Overview
2.1 Key Features
- RO+UV+Alkaline Purification: 8-stage purification process including Reverse Osmosis (RO), Ultraviolet (UV) e-boiling, and Alkaline Boost Technology.
- Alkaline Boost Technology: Increases water pH level and adds essential minerals for improved health benefits.
- Stainless Steel Tank: Equipped with a high-grade 304 stainless steel storage tank for corrosion-free, durable, and hygienic water storage.
- Water Suitability: Suitable for various water sources including tanker, borewell, and municipal water, with a maximum TDS level of 2000 PPM.
- Smart LED Indication: Provides alerts for service reminders, tank full status, and filter life warnings.
- Energy Saving Mode: Automatically turns off the UV lamp when not in use for 10 minutes to extend lamp life and reduce power consumption.
- Taste Adjuster (MTDS): Allows adjustment of water taste to suit individual preferences.
- Flexible Installation: Can be wall-mounted or placed on a countertop.
- Long Cartridge Life: Filters last up to 1 year or 6000 liters, whichever comes first, under standard test conditions.
2.2 Purification Process (8 Stages)
The Aquaguard Marvel NXT employs an 8-stage purification process to ensure the highest quality drinking water.
Image: Overview of the 8-stage purification system, showing various filters and the alkaline boost cartridge.
- Sedi-Shield: This stage removes dust, dirt, and mud particles down to 0.5 micron in size.
Image: Sedi-Shield and Particulate Filter working to remove physical impurities.
- Particulate Filter: Further removes pathogenic particles and suspended matter from the water.
- Chemi Block: Protects against chemicals, odors, and improves the taste of water.
Image: Chemi Block and Taste Adjuster components.
- Taste Adjuster (MTDS): This component allows you to adjust the taste of the purified water to your preference.
- RO Maxx: The Reverse Osmosis membrane removes contaminants such as lead, mercury, microplastics, pesticides, and industrial waste, eliminating disease-causing viruses and bacteria.
Image: RO Maxx filter and UV E-Boiling lamp.
- UV E-Boiling: Delivers water that is as safe and pure as water boiled for over 20 minutes, effectively neutralizing remaining microorganisms.
- 2-in-1 Alkaline Boost: The alkaline cartridge instantly increases the pH level of the water, making it alkaline, and infuses it with essential minerals like Magnesium (Mg) and Calcium (Ca). It uses controlled release technology.
Image: Detailed view of the 2-in-1 Alkaline Boost cartridge with mineral infusion.
2.3 Stainless Steel Tank
Image: The high-grade 304 stainless steel tank, highlighting its anti-corrosive, tough, and durable properties.
The Aquaguard Marvel NXT features a high-grade 304 stainless steel storage tank. This material is chosen for its anti-corrosive properties, ensuring the water remains fresh and hygienic for longer. It is also tough and durable, providing a reliable storage solution for purified water.
2.4 Water Saving RO Technology
Image: The Aquaguard Marvel NXT water purifier, illustrating its water-saving capabilities, saving up to 60% more water compared to ordinary RO systems.
This purifier incorporates advanced RO technology designed to minimize water wastage, saving up to 60% more water compared to conventional RO systems.
2.5 Product Dimensions
Image: Dimensions of the Aquaguard Marvel NXT water purifier: 32 cm (L) x 27.8 cm (W) x 48 cm (H).
3. Setup
3.1 Installation
Professional installation by an authorized service technician is highly recommended to ensure proper functioning and to validate the product warranty. The purifier can be installed as a wall-mounted unit or placed on a countertop.
- Ensure the installation site has a stable power supply and a suitable water inlet connection.
- Verify the water source TDS level using a TDS meter. This purifier is suitable for TDS up to 2000 PPM.
- The installation technician will connect the water inlet, power supply, and perform initial checks.
3.2 Initial Use
After installation, the purifier will undergo an initial flushing process to prepare the filters and tank for use. Follow the technician's instructions for the first use. It is normal for the first few liters of purified water to be discarded to ensure optimal performance and taste.
4. Operating Instructions
4.1 Power On/Off
Connect the power cord to a suitable electrical outlet. The purifier will automatically power on. To turn off, disconnect the power cord from the outlet.
4.2 Dispensing Water
Place a clean container under the water dispenser tap. Push the tap lever to dispense purified water. Release the lever to stop the flow.
4.3 Smart LED Indications
The purifier is equipped with Smart LED indicators that provide real-time status updates:
- Service Reminders: Alerts you when scheduled maintenance or filter replacement is due.
- Tank Full Indication: Lights up when the stainless steel storage tank is full.
- Filter Life Warnings: Indicates when filters are nearing the end of their operational life and require replacement.
4.4 Energy Saving Mode
The Energy Saving Mode automatically activates when the UV lamp is not in use for 10 minutes. This feature helps to prolong the life of the UV lamp and reduces overall power consumption.
4.5 Taste Adjuster (MTDS)
Image: The Taste Adjuster mechanism, designed to fine-tune the water's flavor.
The Taste Adjuster allows you to customize the taste of the purified water. Consult your installation technician or the Aquaguard service center for guidance on adjusting this feature to achieve your preferred taste profile.
5. Maintenance
5.1 Filter Replacement
The filters have a life cycle of up to 1 year or 6000 liters, whichever occurs earlier. The Smart LED indications will provide warnings when filters need replacement. Regular replacement of filters is crucial for maintaining purification efficiency and water quality. Always use genuine Aquaguard replacement filters.
5.2 Tank Cleaning
The stainless steel tank should be cleaned periodically by an authorized service technician to ensure hygiene and prevent accumulation of any deposits. Do not attempt to clean the internal components yourself.
5.3 Professional Servicing
For any maintenance, repairs, or filter replacements, always contact authorized Aquaguard service personnel. Unauthorized servicing may void your warranty and could compromise the safety and performance of the purifier.
6. Troubleshooting
6.1 Common Issues
- No Water Dispensing: Check if the power supply is connected and switched on. Ensure the water inlet valve is open. The tank might be empty or the purification process is ongoing.
- Slow Water Flow: This could indicate clogged filters. Refer to the Smart LED indicators for filter life warnings.
- Unusual Water Taste/Odor: This may suggest that filters need replacement or the Taste Adjuster requires recalibration.
- Water Leakage: Immediately disconnect the power supply and turn off the water inlet. Contact customer support for assistance. Do not attempt to fix leaks yourself.
6.2 Contacting Support
If you encounter any issues that cannot be resolved by basic troubleshooting, please contact Aquaguard customer support. Provide your model number (GWPDMRUAS03B00) and a detailed description of the problem.
7. Specifications
7.1 Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Aquaguard |
| Model Name | Marvel NXT RO+UV+MTDS+Alkaline+SS (Stainless Steel) |
| Model Number | GWPDMRUAS03B00 |
| Purification Method | RO+UV+MTDS+Alkaline |
| Special Features | High Grade 304 Stainless Steel Tank, Alkaline Boost Technology, Taste Adjuster (MTDS) |
| Product Dimensions (L x W x H) | 32L x 27.8W x 48H Centimeters |
| Material | Stainless Steel |
| Capacity | 6 Liters |
| Installation Type | Wall-mounted, Countertop |
| Power Source Type | Corded Electric |
| Supported Water TDS Level Maximum | 2000 PPM |
| Filter Life Cycle | 1 Year or 6000 Liters (whichever is earlier) |
| Item Weight | 8500 Grams |
| What's in the box? | Water Purifier, Accessories, Warranty Card |
8. Warranty & Support
8.1 Warranty Information
Your Aquaguard Marvel NXT Water Purifier comes with a 1 Year Comprehensive Domestic Warranty from the date of purchase. Please refer to the warranty card included in the box for detailed terms and conditions. Keep your purchase receipt for warranty claims.
8.2 Customer Support
For any assistance, service requests, or inquiries, please contact Eureka Forbes customer support. They have a wide service network across India with certified technicians.
- Manufacturer: Aquaguard, Eureka Forbes
- Contact Numbers: Ph-7302000716/17, 7455001674, 6399041114/15/16/17/18/19
- Service Network: Presence in 700+ cities & 17,000+ pincodes with 8,500+ certified technicians.
- Online Support: Instant service booking via Eureka Forbes App.
Image: India's widest service network for Aquaguard products.
9. Video Resources
No official product videos with relevant creator type or preview information were available in the provided data to embed in this manual.
