CULVER Artemis Pro Lightweight Foldable Electric Wheelchair User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your CULVER Artemis Pro Lightweight Foldable Electric Wheelchair. Please read this manual thoroughly before operating the wheelchair to ensure proper setup, operation, and maintenance. This electric wheelchair is designed for versatile use, offering mobility support indoors, outdoors, and during travel.

2. Setup Instructions

Follow these steps to prepare your CULVER Artemis Pro Electric Wheelchair for first use:

1. Unpack the Wheelchair: Carefully remove all components from the packaging. Inspect for any visible damage.
2. Initial Battery Charge: Before the first use, fully charge the battery for 6-8 hours. Refer to the 'Battery Charging' section for detailed instructions.
3. Attach the Controller: Connect the joystick controller to the designated port on the wheelchair. Ensure a secure connection.
4. Familiarize Yourself: Take time to understand the controls and features of the wheelchair before attempting to operate it.
5. Weight Capacity Check: Ensure that the user's weight does not exceed the maximum capacity of 265 lbs for this model.

3. Operating Instructions

Operating your Artemis Pro wheelchair is straightforward. Follow these guidelines for safe and efficient use.

3.1 Powering On and Off

• To turn on the wheelchair, press the power button on the joystick controller. The battery indicator lights will illuminate.
• To turn off, press and hold the power button until the lights extinguish.

3.2 Joystick Controls

The 360-degree joystick provides intuitive control over the wheelchair's movement and speed.

• Joystick Movement: Push the joystick in the desired direction to move. The further you push, the faster the wheelchair will travel (up to 4 mph).
• Speed Adjustment: Use the 'Speed Up' and 'Speed Down' buttons to adjust the maximum speed setting.
• Horn: Press the horn button to alert others.
• Battery Indicator: Monitor the battery level using the indicator lights on the controller.

3.3 Braking System

The Artemis Pro features an electromagnetic braking system for safety.

• When the joystick is released, the wheelchair will automatically brake smoothly and safely. This applies whether on an incline, decline, or flat surface.

3.4 Folding and Transport

The wheelchair is designed for easy folding and portability.

• To fold the wheelchair, follow the 3-second folding process as described in the product details (specific steps not provided in source, refer to product packaging for visual guide).
• Once folded, the compact design allows for easy storage in most vehicle trunks or can be dragged like a suitcase.

3.5 All-Terrain Capability

Equipped with anti-leaning rear design and high-quality rubber tires, the wheelchair offers stability on various surfaces.

• The wheelchair can be driven safely on grass, gravel, brick, and muddy terrains.
• It can navigate slopes up to 12 degrees maximum.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your electric wheelchair.

4.1 Battery Charging

• Charge the Lithium-Ion LiFePO4 battery for 6-8 hours before first use and after each use.
• The battery charges through the controller. Ensure the charger is connected correctly.
• Avoid completely draining the battery to prolong its lifespan.

4.2 General Cleaning

• Wipe down the frame and seat cushions with a damp cloth. Avoid using abrasive cleaners.
• Keep the motors and electrical components free from dust and moisture.

4.3 Tire Inspection

• Regularly check the tires for wear and tear.
• Ensure tires are free from debris that could affect performance.

5. Troubleshooting

This section addresses common issues you might encounter with your electric wheelchair.

• Wheelchair Not Powering On: Ensure the battery is fully charged and properly connected. Check all cable connections to the controller.
• Wheelchair Not Moving: Verify the power is on and the battery has sufficient charge. Check if the joystick is functioning correctly. Ensure no obstacles are impeding wheel movement.
• Reduced Range or Speed: This may indicate a low battery charge or a battery that is nearing the end of its lifespan. Ensure the battery is charged for the recommended duration.
• Loud Reverse Beep: While the reverse beep is a safety feature, if it becomes excessively loud or problematic, consult the support section for assistance.

If you experience issues not covered here, or if troubleshooting steps do not resolve the problem, please contact customer support.

6. Specifications

Key technical specifications for the CULVER Artemis Pro Electric Wheelchair:

7. Warranty and Support

CULVER is committed to providing reliable products and customer service.

7.1 Warranty Information

• Your CULVER Artemis Pro Electric Wheelchair comes with a 360-day warranty.
• This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase.

7.2 Customer Support

For any questions, technical assistance, parts, or warranty claims, please contact our support team:

• Phone: +1 714 586 5164
• Call Center Hours: 7:00 AM – 2:00 PM (Pacific Time)
• Messages are typically returned promptly.