GEEKAYANDCO Wooden Hanging Lamp User Manual

Introduction

Thank you for choosing the GEEKAYANDCO Wooden Hanging Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Important Safety Information

To reduce the risk of fire, electric shock, or personal injury, please follow these guidelines:

• Always disconnect power at the main fuse or circuit breaker before installation or servicing.
• Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Ensure all electrical connections comply with local codes and ordinances.
• Do not install near any heat sources or in areas with high humidity.
• Handle the lamp with care to avoid damage to the wooden and glass components.
• Use only the specified LED bulb type.
• Do not modify the lamp in any way.

Package Contents

Carefully unpack your lamp and ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• GEEKAYANDCO Wooden Hanging Lamp Unit (Pack of 2)
• Mounting Hardware (screws, anchors, etc.)
• Light Kit (LED bulb included)
• Instruction Manual (this document)

Image: Two GEEKAYANDCO Wooden Hanging Lamps as received in the package.

Installation Instructions

Before beginning installation, ensure the power supply is turned OFF at the circuit breaker or fuse box.

1. Prepare the Mounting Location: Choose a suitable location on the ceiling or wall. Ensure the mounting surface can support the weight of the lamp.
2. Mark Drilling Points: Use the mounting bracket (if applicable) as a template to mark the drilling points on the ceiling/wall.
3. Drill Holes: Drill pilot holes at the marked points. Insert wall anchors if necessary.
4. Attach Mounting Bracket: Secure the mounting bracket to the ceiling/wall using the provided screws.
5. Make Electrical Connections: Carefully connect the lamp's wires to your household electrical wires. Typically, connect live (black/brown) to live, neutral (white/blue) to neutral, and ground (green/yellow) to ground. Use wire nuts to secure connections. Ensure connections are tight and insulated.
6. Secure the Lamp: Attach the lamp fixture to the mounting bracket, ensuring it is securely fastened.
7. Install Light Bulb: Insert the provided LED bulb into the lamp socket.
8. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Image: Close-up of a single GEEKAYANDCO Wooden Hanging Lamp, illustrating its design for installation reference.

Operation

Once properly installed and connected to a power source, the GEEKAYANDCO Wooden Hanging Lamp operates via your standard wall switch. Simply toggle the switch to turn the lamp ON or OFF.

Note: This lamp is designed for indoor use only.

Care and Maintenance

Regular cleaning will help maintain the appearance and longevity of your lamp.

• Cleaning: Before cleaning, ensure the lamp is turned off and cool. Use a soft, dry cloth to wipe down the wooden and metal surfaces. For the light diffuser, a slightly damp cloth can be used, but avoid excessive moisture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: If the LED bulb needs replacement (though LEDs have a long lifespan), ensure the power is off. Allow the bulb to cool before carefully unscrewing it. Replace with an LED bulb of similar specifications.
• Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.

Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact a qualified electrician or customer support.

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the seller's policy on the purchase platform or contact GEEKAYANDCO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the product page on Amazon.in or contact the seller through the platform's messaging system.