dalattin Smart WiFi LED Lights 130ft Instruction Manual

Introduction

Thank you for choosing the dalattin Smart WiFi LED Lights. This manual provides detailed instructions for the installation, operation, and maintenance of your 130ft smart LED strip lights. These lights are designed to enhance your living space with customizable RGB colors, music synchronization, and smart control via app, remote, or voice commands through Alexa and Google Assistant. Please read this manual carefully before use to ensure proper setup and optimal performance.

Image: Overview of the dalattin Smart WiFi LED Lights 130ft, showcasing the LED strip, controller, power adapter, and remote control.

What's in the Box

Carefully unpack the box and ensure all the following items are included:

• Smart LED WiFi Light Strip (2 rolls of 65.6 ft, total 130 ft)
• Power Adapter
• IR Controller
• 20-key Remote Control

Image: All components of the dalattin Smart WiFi LED Lights package, including the LED strips, power adapter, IR controller, and remote.

Setup Instructions

Follow these steps to set up your dalattin Smart WiFi LED Lights:

1. Prepare the Surface: Ensure the installation surface is clean, dry, and flat. Dust or moisture can affect the adhesive's effectiveness.
2. Connect Components: Connect the LED strip to the IR controller, and then connect the IR controller to the power adapter. Plug the power adapter into a wall outlet.
3. Power On and Test: Before permanent installation, power on the lights to ensure they function correctly. If the lights do not turn on, try reversing the connection of the LED strip to the control box. Note that two strips of light tape share a single controller.
4. Download the App: Search for the 'Smart Life' or 'Tuya Smart' app in your smartphone's app store (iOS or Android) and download it.
5. Register/Log In: Open the app and register for a new account or log in if you already have one.
6. Enable Wi-Fi and Bluetooth: On your smartphone, ensure both Wi-Fi and Bluetooth are enabled. Connect your phone to a 2.4 GHz Wi-Fi network. Important: The dalattin Smart WiFi LED Lights only support 2.4 GHz Wi-Fi networks and are not compatible with 5 GHz Wi-Fi. If you have a 2.4 GHz and 5 GHz 2-in-1 hotspot, you may need to separate them or ensure your phone is connected to the 2.4 GHz band during setup.
7. Enter Pairing Mode: To put the lights into pairing mode, power cycle them three times rapidly (turn off and on three times using the power adapter or a wall switch). The lights should begin to flash, indicating they are ready for pairing.
8. Add Device in App: In the app, tap '+' to add a new device. The app should automatically discover the LED strip lights. Follow the on-screen prompts to connect the lights to your 2.4 GHz Wi-Fi network.
9. Voice Assistant Integration (Optional): Once connected to the app, you can link your dalattin lights to Amazon Alexa or Google Assistant by following the instructions within the Smart Life/Tuya Smart app or your voice assistant's app.

Operating Instructions

Your dalattin Smart WiFi LED Lights offer multiple control methods:

1. App Control

The dedicated smartphone app provides comprehensive control over your LED lights:

• Color Selection: Choose from 16 million colors to match your mood or decor.
• Brightness Adjustment: Adjust the light intensity from 1% to 100%.
• Scene Modes: Select from various pre-set scene modes for different occasions (e.g., Party, Relax, Reading).
• Custom Modes: Create and save your own custom lighting effects.
• Music Sync: Enable microphone mode to synchronize light changes with music or ambient sounds.
• Timer Setting: Schedule the lights to turn on or off at specific times.

2. Remote Control

The included 20-key IR remote control allows for basic functions:

• Power On/Off: Turn the lights on or off.
• Color Selection: Select from a range of static colors.
• Brightness Adjustment: Increase or decrease brightness.
• Mode Selection: Cycle through various dynamic lighting modes.

3. Voice Control (Alexa/Google Assistant)

Once integrated with Alexa or Google Assistant, you can control your lights using simple voice commands:

• "Alexa/Hey Google, turn on the [Light Name]."
• "Alexa/Hey Google, turn off the [Light Name]."
• "Alexa/Hey Google, set [Light Name] to blue."
• "Alexa/Hey Google, dim [Light Name] to 50%."

Image: Illustration of controlling the LED lights via a smartphone app and the included remote control, demonstrating adjustable brightness and modes.

Image: Two children interacting with an Alexa device to control the LED strip lights using voice commands like "Alexa, set the light to blue" and "Alexa, turn on the light."

Image: Depiction of the timer function, allowing users to schedule the LED lights to turn on or off at specific times, such as for a warm light at bedtime.

Installation Tips

For best results and longevity of your LED lights, consider the following:

• Surface Preparation: Always clean the surface thoroughly before applying the adhesive. Use a dry cloth to remove any dust or grease.
• Adhesive Application: Carefully remove the double-sided tape backing and press the light strip firmly onto the desired surface to ensure full adhesion.
• Placement: These lights are suitable for indoor decoration in areas like bedrooms, living rooms, kitchens, and around TVs.
• Avoid Obstructions: Ensure the IR receiver on the controller is not obstructed if you plan to use the remote control.
• Adhesive Strength: The adhesive is strong for secure mounting. Be aware that removing the strips from painted walls may cause paint damage. Consider this when choosing your installation location.

Image: Step-by-step guide on how to prepare the surface, remove the adhesive backing, and press the LED strip to ensure proper installation.

Image: Examples of the dalattin LED lights installed in different indoor settings such as a living room, corridor, studio, and lockers, demonstrating versatile decorative applications.

Maintenance

To ensure the longevity and optimal performance of your dalattin Smart WiFi LED Lights:

• Cleaning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Avoid Water: These lights are designed for indoor use only. Avoid exposure to water or high humidity.
• Handle with Care: Do not bend the LED strips sharply or apply excessive force, as this can damage the internal circuitry.
• Power Off When Not in Use: For extended periods of non-use, unplug the power adapter.

Troubleshooting

If you encounter issues with your dalattin Smart WiFi LED Lights, refer to the following common problems and solutions:

• Lights Not Turning On:
  • Ensure all connections (strip to controller, controller to power adapter, power adapter to outlet) are secure.
  • Try reversing the plug of the LED strip into the control box.
  • Verify the power outlet is functional.
• Remote Control Not Working:
  • Ensure the remote's battery is functional and correctly inserted.
  • Point the remote directly at the IR receiver on the controller. Ensure there are no obstructions.
  • If the remote works with other devices but not the LEDs, the IR receptor on the LED controller might be faulty.
• Cannot Connect to Wi-Fi / App Issues:
  • Confirm your Wi-Fi network is 2.4 GHz. These lights do not support 5 GHz Wi-Fi.
  • Ensure your phone is connected to the 2.4 GHz Wi-Fi network during setup.
  • Make sure the lights are in pairing mode (flashing). If not, power cycle them three times rapidly.
  • Check your Wi-Fi signal strength at the installation location.
  • If you experience an error during Alexa connection, try again after an hour or two.
• Inconsistent Colors / Part of Strip Not Working:
  • If one of the 65.6ft strips displays a different color (e.g., stays green) or turns off when a specific color is selected, this may indicate a faulty strip or connector.
  • Inspect the connection points for any damage or loose contacts.
• Power Adapter/Transformer Gets Hot:
  • It is normal for power adapters to generate some heat during operation. However, if it becomes excessively hot to the touch, unplug it immediately and contact customer support.
• Adhesive Causing Paint Damage:
  • The adhesive is designed to be strong. When removing the strips, do so slowly and carefully to minimize potential damage to painted surfaces. Consider using a hairdryer to gently warm the adhesive for easier removal.

Specifications

Warranty and Support

dalattin products are designed for quality and reliability. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims. For technical support, troubleshooting assistance, or inquiries regarding your product, please contact dalattin customer service through the retailer's platform or the official dalattin website. Our support team is available to help you with any questions or concerns you may have.