Xtrem Bots Mark

Xtrem Bots Mark Programmable Robot Instruction Manual

Model: Mark | Brand: Xtrem Bots

1. Introduction

The Xtrem Bots Mark is an interactive programmable robot designed to introduce children to basic robotics concepts through engaging play. This robot features remote control operation, gesture control, programmable movements, and expressive LED facial displays. This manual provides essential information for setting up, operating, and maintaining your Mark robot.

2. Safety Information

  • Age Recommendation: This product is recommended for children aged 4 years and older.
  • Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Insert batteries with correct polarity. Remove exhausted batteries promptly.
  • Choking Hazard: Small parts may be present. Not suitable for children under 3 years.
  • Supervision: Adult supervision is recommended during play, especially during initial setup and programming.
  • Environment: Use the robot on flat, clear surfaces to prevent falls and damage. Avoid water and extreme temperatures.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Xtrem Bots Mark Robot (Grey, Black, Red)
  • 1 x Remote Control
  • 1 x USB Charging Cable (for robot)
  • 1 x Instruction Manual (this document)
Xtrem Bots Mark robot and remote control

Image: The Mark robot in grey, black, and red, standing next to its grey remote control.

4. Setup

4.1. Robot Battery Charging

The Mark robot is equipped with a built-in rechargeable battery. Before first use, fully charge the robot.

  1. Locate the charging port on the robot (usually on the back or side).
  2. Connect the small end of the USB charging cable to the robot's charging port.
  3. Connect the larger end of the USB charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
  4. The robot's indicator light will show charging status (e.g., red for charging, off/green for fully charged).
  5. Charging typically takes 2-3 hours. Disconnect the cable once fully charged.
Xtrem Bots Mark robot charging via USB

Image: The Mark robot connected via a USB cable to a laptop for charging.

4.2. Remote Control Battery Installation

The remote control requires 2 x AA batteries (not included).

  1. Locate the battery compartment on the back of the remote control.
  2. Open the battery compartment cover.
  3. Insert 2 new AA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

4.3. Powering On/Off

  • Robot: Locate the power switch on the robot (usually on its back or chest). Slide it to the 'ON' position.
  • Remote Control: Press the power button on the remote control. An indicator light should illuminate.

5. Operating Instructions

5.1. Remote Control Functions

The remote control allows for various movements and actions. Refer to the remote control diagram for specific button layouts.

  • Directional Movement: Use the directional buttons to move the robot forward, backward, turn left, and turn right.
  • Speed Adjustment: Adjust the robot's movement speed using the designated speed buttons.
  • Volume Control: Adjust the robot's sound volume.
  • Sound Effects: Trigger various robotic sounds.
  • Facial Expressions: The robot features 26 LEDs to display up to 20 different facial expressions. These may change automatically or be triggered by specific actions/buttons.

5.2. Gesture Control

The Mark robot can be controlled using hand gestures through its "smart command" feature.

  • Activate gesture control mode (refer to remote control for specific button).
  • Perform specific hand movements in front of the robot's sensors to command it to move or perform actions.
Xtrem Bots Mark robot responding to hand gestures

Image: The Mark robot rotating, demonstrating its gesture control capabilities with a hand gesture shown in the background.

5.3. Programming Mode

Program the Mark robot to perform a sequence of up to 50 movements.

  1. Enter programming mode (refer to remote control for specific button).
  2. Input a sequence of directional movements, turns, and actions using the remote control.
  3. Confirm the programmed sequence.
  4. Press the 'Play' button to execute the programmed actions.
Xtrem Bots Mark robot programming sequence example

Image: The Mark robot with an illustration showing a sequence of programmed movements on a grid, leading to a 'Finish' line.

5.4. Dance Mode

Activate the dance mode for the robot to perform pre-programmed dance routines with music and movements.

  • Press the 'Dance' button on the remote control.
  • The robot will begin to move and play music.
Xtrem Bots Mark robot dancing with a family

Image: The Mark robot dancing in a living room, with a family watching and enjoying the performance.

6. Maintenance

6.1. Cleaning

  • Wipe the robot and remote control with a soft, dry cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Avoid getting water into any openings.

6.2. Storage

  • Store the robot and remote control in a cool, dry place away from direct sunlight.
  • If storing for an extended period, remove batteries from the remote control to prevent leakage.

7. Troubleshooting

ProblemPossible CauseSolution
Robot does not turn on.Robot battery is low or depleted.Charge the robot's battery fully.
Remote control does not work.Remote control batteries are low or incorrectly installed.Replace AA batteries in the remote control, ensuring correct polarity.
Robot does not respond to commands.Interference or out of range.Ensure robot and remote are within operating range and away from other electronic devices.
Programming sequence is incorrect.Incorrect commands entered during programming.Clear the current program and re-enter the sequence carefully.

8. Specifications

  • Model: Mark
  • Brand: Xtrem Bots
  • Product Dimensions (L x W x H): 25.5 x 12.5 x 31.5 cm
  • Weight: 810 grams
  • Recommended Age: 4 years and up
  • Educational Value: Develops motor skills, problem-solving, and basic robotics understanding.
  • Manufacturer Reference: 843659803
  • Number of Pieces: 1
  • Assembly Required: No
  • Robot Battery: Built-in rechargeable (USB charge)
  • Remote Control Batteries: 2 x AA (not included)
  • Main Material: Plastic
  • Features: Remote control, gesture control, programmable (up to 50 actions), 20 facial expressions (26 LEDs), robotic sounds, dance mode.
Xtrem Bots Mark robot with height measurement

Image: The Mark robot with a vertical arrow indicating its height of 27.5 cm.

9. Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Xtrem Bots website. Keep your purchase receipt as proof of purchase.

Related Documents - Mark

Preview SAM Your Robotic Friend: Assembly and Instruction Manual
Comprehensive instruction and assembly manual for the SAM Your Robotic Friend robot toy by XTREM BOTS. Includes safety warnings, maintenance tips, parts list, and step-by-step building instructions.
Preview Xtrem Bots Robbie Instruction Manual
Learn how to set up, operate, and enjoy the Xtrem Bots Robbie robot toy with this comprehensive instruction manual. Discover its functions, modes, and smart controls.
Preview Mark Fan Coil Technical Manual - Model 0662570
Comprehensive technical manual for the Mark Fan Coil unit (Model 0662570) by Puravent, covering identification, receiving, safety guidelines, operating limits, installation, hydraulic and electrical connections, maintenance, and troubleshooting.
Preview MARK PinTherm Infra Connect Technical Manual
This technical manual provides comprehensive instructions for the MARK PinTherm Infra Connect, covering installation, operation, and technical specifications. Learn how to set up and utilize the device for optimal climate control.
Preview Mark 4-7 V2 Installation Manual
This document provides the installation manual for the Mark 4-7 V2, detailing the packing list and step-by-step assembly instructions.
Preview MARK Slot 2 Wall Direct/Indirect Pattern: Specifications and Ordering Guide
Comprehensive technical specifications and ordering guide for the MARK Slot 2 Wall Direct/Indirect Pattern LED luminaire. Details include fixture performance, dimensions, shielding options, integrated controls (nLight, nLight Air), sensor configurations, emergency lighting features, and warranty information.