1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Quarte Twin Size Daybed with Trundle, L-Shaped Storage Cabinets, and USB Ports. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Image 1.1: The Quarte Twin Size Daybed with Trundle, L-Shaped Storage, and USB Ports in a room setting.
Important Safety Information
WARNING:
- This bed is intended for use by children and adults.
- To prevent entrapment and suffocation hazards, do not use this bed with crib bumpers, comforters, blankets, pillows, or other soft bedding.
- Always use a properly fitted mattress.
- Avoid placing the bed near windows, cords, or other potential hazards.
- Follow all care instructions to ensure the longevity and safety of the product.
2. Package Contents
Before beginning assembly, please ensure all parts and hardware are present and accounted for. Refer to the separate assembly instruction sheet included in your package for a detailed list of components. If any parts are missing or damaged, please contact customer support immediately.
3. Assembly Instructions
Assembly of the Quarte Daybed requires following the step-by-step installation manual provided in your product packaging. All necessary parts are clearly indicated, and pre-drilled holes facilitate the assembly process. It is recommended to assemble the bed in the room where it will be used.
- Unpack all components and verify against the parts list in the separate manual.
- Identify all hardware and tools required (typically an Allen wrench is included, but a screwdriver may be needed).
- Follow the numbered steps in the assembly manual carefully.
- Ensure all connections are secure before use. Do not overtighten screws.
Image 3.1: The daybed frame showing the slat support system and integrated L-shaped storage structure.
Image 3.2: The daybed with the trundle bed fully extended, illustrating the additional sleeping space.
4. Operation
4.1. Using the Trundle Bed
The integrated trundle bed provides an additional sleeping surface, ideal for guests or maximizing space in smaller rooms. To use the trundle:
- Gently pull the trundle unit from beneath the main daybed frame. It is equipped with wheels for easy movement.
- Ensure the trundle is fully extended and stable before use.
- To store, push the trundle back into its compartment under the daybed until it is fully recessed.
Image 4.1: Side view demonstrating the trundle bed partially pulled out from under the main daybed.
4.2. Utilizing L-Shaped Storage Cabinets
The L-shaped bookcase features five built-in storage cabinets designed to hold books, decorative items, or personal belongings. These cabinets are integrated into the headboard and side rail structure.
- Place items securely within the compartments.
- Avoid overloading the shelves to prevent damage or instability.
Image 4.2: Detailed view of the L-shaped storage cabinets, showing multiple compartments for organization.
4.3. Using USB Ports and Power Outlets
The daybed includes two standard plug outlets and two USB ports located on the top of the armrest for convenient charging of electronic devices.
- Ensure the bed's power cord is properly plugged into a functional wall outlet.
- Connect your device's charging cable to one of the USB ports or plug an adapter into a standard outlet.
- Do not exceed the maximum power rating of the outlets.
Image 4.3: Close-up view of the integrated USB charging ports and standard electrical outlets.
5. Maintenance and Care
Proper care will extend the life and appearance of your Quarte Daybed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Tightening Hardware: Periodically check and tighten all screws and bolts to ensure the bed remains stable and secure.
- Mattress Care: Follow the mattress manufacturer's care instructions. Ensure the mattress thickness is within the recommended 6-8 inches for both the main bed and trundle.
- Environmental Conditions: Avoid exposing the bed to extreme temperatures or humidity, which can affect wood integrity.
6. Troubleshooting
If you encounter any issues with your Quarte Daybed, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose hardware. | Check and tighten all screws and bolts. |
| Trundle does not slide smoothly. | Obstruction or dirty wheels. | Clear any obstructions. Clean trundle wheels. |
| USB ports/outlets not working. | Power cord not connected or wall outlet issue. | Ensure the bed's power cord is securely plugged into a functional wall outlet. Test the wall outlet with another device. |
| Missing parts during assembly. | Packaging error. | Refer to the package contents list and contact Quarte customer support for replacement parts. |
If the problem persists after attempting these solutions, please contact Quarte customer support for further assistance.
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Quarte |
| Model Number | Daybed |
| Size | Twin |
| Overall Product Dimensions (L x W x H) | 86.3'' x 50.7'' x 37.6'' |
| Main Bed Dimensions | 76.2'' x 39.3'' |
| Trundle Bed Dimensions | 75.6'' x 39.3'' |
| Total Height | 37.6'' |
| Number of Bed Slats (Upper/Trundle) | 10pcs / 7pcs |
| Recommended Mattress Thickness (Upper/Trundle) | 6-8 inches |
| Overall Product Weight | 137 lbs |
| Bed Weight Capacity (Upper/Trundle) | 400 lbs / 250 lbs |
| Material | Pine Wood + MDF |
| Special Features | L-Shaped Storage Cabinets, 2 Standard Plug Outlets, 2 USB Ports, Trundle Bed |
| Assembly Required | Yes |
Image 7.1: Technical drawing illustrating the detailed dimensions of the Quarte Twin Size Daybed and its components.
8. Warranty and Customer Support
For warranty information, replacement parts, or any questions not covered in this manual, please contact Quarte customer support. Keep your purchase receipt and model information handy when contacting support.
You can typically find contact information on the product packaging or the retailer's website where the product was purchased.
