TOCHIC FML024 Gold Leaf Flush Mount Ceiling Light Fixture User Manual

1. Introduction

Thank you for purchasing the TOCHIC FML024 Gold Leaf Flush Mount Ceiling Light Fixture. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

TOCHIC FML024 Gold Leaf Flush Mount Ceiling Light Fixture installed in a hallway — Figure 1: TOCHIC FML024 Gold Leaf Flush Mount Ceiling Light Fixture in a hallway setting.

2. Safety Information

WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety guidelines:

Always turn off the power at the main circuit breaker or fuse box before installation, servicing, or cleaning.
Consult a qualified electrician if you are not familiar with electrical wiring.
Use only bulbs of the specified type and wattage. Exceeding the maximum wattage may cause overheating.
Do not install this fixture in wet or damp locations. It is designed for indoor use only.
Ensure all electrical connections are secure and comply with local electrical codes.
Handle the fixture with care to avoid damage to the metal leaves.

3. Package Contents

Verify that all components are present before beginning installation:

Flush Mount Ceiling Light Fixture (1 unit)
Hardware Screws (for installation)
Detailed Manuals (this document)

4. Product Specifications

Feature	Detail
Model Number	FML024
Brand	TOCHIC
Color	Gold
Material	Metal
Dimensions (L x W x H)	15.75" x 15.75" x 9.69"
Light Source	4 x E12 Bulbs (Max 60W per bulb)
Bulb Compatibility	Incandescent, LED, CFL, Halogen
Dimmable	Yes (dimmer and bulbs not included)
Voltage	110 Volts
Installation Type	Semi Flush Mount
Room Type	Foyer, Hallway, Entryway, Bedroom, Dining Living Room, Laundry Room or Kitchen Island

Dimension diagram of the TOCHIC FML024 light fixture — Figure 2: Product dimensions and bulb specifications.

5. Installation Instructions

This fixture requires hard wiring installation. If you are unsure about the installation process, consult a qualified electrician.

5.1. Before You Begin

Turn off Power: Locate the circuit breaker or fuse box for the room where you are installing the fixture and turn off the power. Ensure the power is completely off before proceeding.
Gather Tools: You will need a screwdriver, wire strippers, electrical tape, and possibly a ladder.
Unpack: Carefully remove all components from the packaging and inspect for any damage.

5.2. Mounting the Fixture

Attach the mounting bracket to the junction box in the ceiling using the provided hardware screws. Ensure it is securely fastened.
Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Secure connections with electrical tape.
Carefully tuck the wires into the junction box.
Align the fixture's canopy with the mounting bracket and secure it with the decorative nuts or screws.

Close-up of the light fixture ceiling canopy — Figure 3: Close-up view of the ceiling canopy and mounting points.

5.3. Installing Bulbs

Screw four E12 base bulbs (not included) into the sockets. Do not exceed 60W per bulb.
Ensure bulbs are fully seated in the sockets.

Close-up of E12 bulb base holders and vivid olive leaves — Figure 4: Detail of the E12 bulb base holders and the decorative olive leaves.

5.4. Final Steps

Once the fixture is securely mounted and bulbs are installed, restore power at the circuit breaker.
Test the light fixture to ensure proper operation.

Video 1: Overview of the TOCHIC gold leaf semi flush mount ceiling light fixture, demonstrating its design and features.

6. Operating Instructions

The TOCHIC FML024 light fixture is designed for straightforward operation via a standard wall switch (not included).

6.1. Turning On/Off

Simply use the wall switch connected to the fixture to turn the light on or off.

Comparison of the light fixture in off and on states — Figure 5: The light fixture shown in both the 'off' and 'on' states.

6.2. Dimmable Feature

This fixture is dimmable. To utilize the dimming function, you must install dimmable E12 bulbs and connect the fixture to a compatible dimmer switch (both sold separately).

7. Maintenance

7.1. Cleaning

To maintain the appearance of your fixture:

Ensure the power is turned off before cleaning.
Wipe the fixture with a soft, dry cloth.
Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.

7.2. Bulb Replacement

When replacing bulbs:

Turn off the power at the circuit breaker.
Allow old bulbs to cool completely before removing.
Replace with new E12 base bulbs, ensuring they do not exceed 60W each.

8. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power to the fixture.	Check circuit breaker or fuse. Ensure wall switch is on.
	Loose wiring connection.	Turn off power, check all wire connections.
	Faulty bulb.	Replace bulb(s).
Light flickers or dims improperly.	Incorrect bulb type for dimmer.	Ensure dimmable bulbs are used with a compatible dimmer switch.
	Loose bulb connection.	Turn off power, tighten bulbs in sockets.

9. Warranty Information

The TOCHIC FML024 Gold Leaf Flush Mount Ceiling Light Fixture comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact TOCHIC customer support. Refer to your purchase documentation for contact details or visit the official TOCHIC website.