Introduction
Thank you for choosing the Elenhome Candle Warmer Lamp. This device is designed to melt scented candles using heat from a bulb, releasing fragrance without an open flame. This manual provides essential information for safe and effective use of your candle warmer lamp.
Image: The Elenhome Candle Warmer Lamp in operation, showcasing its design and light output.
Safety Information
Please read and understand all safety instructions before using the candle warmer lamp. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not use outdoors or in wet conditions.
- Flameless Operation: The lamp melts candles using heat from the bulb, eliminating the need for an open flame. Do not attempt to light the candle wick while the lamp is in use.
- Placement: Place the lamp on a stable, flat, heat-resistant surface away from flammable materials, curtains, or other objects that could catch fire.
- Keep Away from Children and Pets: Ensure the lamp is placed out of reach of children and pets to prevent accidental burns or damage.
- Hot Surface: The bulb and surrounding metal parts can become hot during operation. Avoid touching these surfaces while the lamp is on or immediately after turning it off.
- Power Cord: Do not place the power cord under rugs or in areas where it can be damaged or create a tripping hazard.
- Ventilation: Ensure adequate ventilation around the lamp during operation.
- Bulb Replacement: Always unplug the lamp and allow it to cool completely before replacing the bulb. Use only the specified bulb type (GU10, 35W).
Image: Visual comparison highlighting the flameless and smokeless operation of the candle warmer lamp versus a traditional candle.
Product Features
- Adjustable Height: The lamp's height can be adjusted to accommodate various candle sizes, up to a maximum candle height of 5.5 inches and diameter of 3.1 inches.
- Stepless Dimming: Features a rotary dimmer switch on the cord to adjust the light intensity, which controls the heat output and fragrance release.
- Timer Function: Includes a timer with settings for 2, 4, or 8 hours, allowing for automatic shut-off.
- Durable Construction: Made with a metal lampshade and base, ensuring stability and longevity.
- Energy-Efficient: Designed to gently melt candles, promoting longer candle life and efficient fragrance diffusion.
Image: Detailed view of the lamp's components and features.
Image: Illustration of the adjustable height mechanism, accommodating various candle dimensions.
Assembly and Setup
- Unpack: Carefully remove all components from the packaging. Verify that all parts are present: lamp unit, power cord with dimmer/timer switch, and two GU10 35W bulbs.
- Insert Bulb: Gently insert one of the provided GU10 35W bulbs into the socket located inside the lampshade. Twist clockwise to secure it.
- Place Candle: Position your jar candle (maximum 5.5 inches height, 3.1 inches diameter) on the center of the lamp's base.
- Adjust Height: Loosen the knob on the lamp's pole to adjust the height of the lampshade. Ensure the bulb is approximately 0.75 inches (3/4") above the candle for optimal melting. Tighten the knob to secure the height.
- Connect Power: Plug the power cord into a standard 110V electrical outlet.
Operating Instructions
- Power On/Off: Use the rotary switch on the power cord to turn the lamp on or off.
- Adjust Brightness/Heat: Rotate the dimmer knob on the power cord to adjust the light intensity. Higher brightness provides more heat, leading to faster wax melting and stronger fragrance release. Lower brightness provides less heat for a subtle effect.
- Set Timer: If your model includes a timer function (indicated by buttons on the remote), press the timer button to select a duration of 2, 4, or 8 hours. The lamp will automatically turn off after the selected time.
Image: Visual representation of the stepless dimming function, from low to high light intensity.
Care and Maintenance
- Cleaning: Unplug the lamp and allow it to cool completely before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Bulb Replacement: When the bulb needs replacement, ensure the lamp is unplugged and cool. Carefully unscrew the old bulb and screw in a new GU10 35W bulb.
- Wax Management: Over time, the top layer of wax may lose its fragrance. To refresh the scent, carefully pour off a small amount of the melted wax from the top layer.
Troubleshooting
- Lamp Not Turning On:
- Check if the power cord is securely plugged into the outlet.
- Ensure the dimmer switch is turned to the 'On' position and not at the lowest setting.
- Verify that the bulb is correctly installed and not burnt out. Replace if necessary.
- Candle Not Melting/Weak Scent:
- Increase the brightness/heat using the dimmer switch.
- Adjust the lamp height to ensure the bulb is closer to the candle surface (approximately 0.75 inches above).
- If the candle has been used for a long time, the top layer of wax may have lost its fragrance. Carefully pour off a small amount of the melted wax to expose fresh wax.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | WN-CL03-01 |
| Brand | Elenhome |
| Product Dimensions | 4.7"D x 4.65"W x 11.8"H |
| Item Weight | 16 ounces (1 pound) |
| Material | Metal |
| Finish Type | Powder Coated |
| Bulb Base | GU10 |
| Wattage | 35 watts |
| Voltage | 110 Volts |
| Light Source Type | LED (Note: Product description mentions LED, but bulbs are GU10 35W, typically halogen. Please verify bulb type if replacement is needed.) |
| Control Method | Rotary (Dimmer), Touch (Timer) |
| Special Feature | Adjustable Height, Corded, Dimmable, Timer |
| Indoor/Outdoor Usage | Indoor use only |
Warranty and Support
The Elenhome Candle Warmer Lamp comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Elenhome customer service through the retailer where the product was purchased or visit the official Elenhome website for contact information.