Denver KPC-1370P Kids Digital Camera

1. Introduction

Thank you for choosing the Denver KPC-1370P Kids Digital Camera. This manual provides essential information for the safe and effective use of your new camera. Please read it thoroughly before operation and retain it for future reference.

Safety Information

• This product is intended for children under adult supervision.
• Do not expose the camera to water or excessive moisture.
• Avoid dropping the camera or subjecting it to strong impacts.
• Use only the provided USB cable for charging.
• Keep small parts, such as the MicroSD card, away from young children to prevent choking hazards.

2. Package Contents

Ensure all items are present in the package:

• Denver KPC-1370P Kids Digital Camera
• USB Charging Cable
• MicroSD Card (pre-installed or separate)
• Thermal Print Paper Rolls (quantity may vary, typically 3 rolls)
• Instruction Manual (this document)

Image 2.1: Camera with included accessories (MicroSD card and thermal paper rolls).

3. Product Overview

Familiarize yourself with the camera's components and controls.

Image 3.1: Front view of the camera with an instant print example.

Image 3.2: The camera's compact design and instant print capability.

Key Components:

• Lens: Main camera lens for capturing photos and videos.
• LCD Screen: 2.8-inch display for viewing photos, videos, and navigating menus.
• Shutter Button: Press to take a photo or start/stop video recording.
• Navigation Buttons: Used to move through menus and select options.
• Power Switch: Located on the side for turning the camera on/off.
• USB Port: For charging the camera and transferring data.
• MicroSD Card Slot: For inserting the memory card.
• Thermal Printer Output: Slot where printed photos emerge.

Image 3.3: Side view showing the SD card slot, USB port, and ON/OFF switch.

4. Setup

4.1 Charging the Camera

1. Locate the USB port on the side of the camera.
2. Connect the provided USB cable to the camera's USB port.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer's USB port.
4. The charging indicator light will illuminate. Allow approximately 2-3 hours for a full charge. The light will change or turn off when charging is complete.

4.2 Inserting the MicroSD Card

1. Ensure the camera is powered off.
2. Locate the MicroSD card slot on the side of the camera.
3. Gently insert the MicroSD card (gold contacts facing down or as indicated by the slot diagram) until it clicks into place.
4. To remove, gently push the card in again until it springs out.

4.3 Loading Thermal Print Paper

1. Locate the paper compartment on the side of the camera.
2. Open the compartment cover.
3. Insert a roll of thermal print paper (57x30mm) according to the loading direction diagram inside the compartment. Ensure the paper feeds smoothly.
4. Pull a small length of paper out of the compartment and close the cover, ensuring the paper protrudes from the printing slot.

Image 4.1: Thermal paper loading instructions.

5. Operating Instructions

5.1 Power On/Off

• To power on, slide the ON/OFF switch to the "ON" position. The screen will illuminate.
• To power off, slide the ON/OFF switch to the "OFF" position.

5.2 Taking Photos

1. Turn on the camera. It will typically start in photo mode.
2. Frame your shot using the LCD screen.
3. Press the Shutter Button to capture the image. The photo will be saved to the MicroSD card.

5.3 Recording Videos

1. From photo mode, use the navigation buttons to switch to video mode (look for a video camera icon).
2. Press the Shutter Button once to start recording. A timer or indicator will show recording is active.
3. Press the Shutter Button again to stop recording. The video will be saved to the MicroSD card.

Image 5.1: The camera supports video recording.

5.4 Using Filters and Frames

• While in photo mode, use the navigation buttons to access the filter/frame options.
• Select from 7 available filters and 28 frames to customize your photos.
• Confirm your selection before taking the photo.

Image 5.2: Examples of filters and frames available.

5.5 Instant Printing

1. After taking a photo, or when viewing a saved photo in playback mode, look for a print icon or option in the menu.
2. Select the print option. The camera will print the image onto the thermal paper.
3. Gently tear off the printed photo from the camera's output slot.

5.6 Playing Games

• Navigate to the games menu using the navigation buttons.
• Select from the 4 pre-installed games.
• Use the navigation buttons to control gameplay.

6. Maintenance

6.1 Cleaning the Camera

• Wipe the camera body with a soft, dry cloth.
• For the lens and screen, use a specialized lens cleaning cloth to avoid scratches.
• Do not use liquid cleaners or solvents.

6.2 Battery Care

• Charge the camera regularly, even if not in frequent use, to maintain battery health.
• Avoid fully discharging the battery for extended periods.
• Do not expose the camera to extreme temperatures.

6.3 Storage

• Store the camera in a cool, dry place away from direct sunlight.
• If storing for a long period, ensure the battery is partially charged (around 50%).

7. Troubleshooting

8. Specifications

9. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Denver website. If you encounter any issues not covered in this manual, please contact Denver customer support for assistance.

You can find more information and support at the Denver Brand Store.