ZSHINE Motorized Roller Shades ZM25-EAZ User Manual

1. Product Overview

The ZSHINE Motorized Roller Shades provide an automated solution for window coverings, featuring a rechargeable motor and solar shade fabric. These shades are designed for indoor use and offer smart control capabilities, including compatibility with Alexa for certain motor types. The ZM25-EAZ model is specifically designed for direct compatibility with Alexa.

Key features include:

• Glare-blocking solar shade fabric.
• Rechargeable motor for cordless operation.
• Customizable sizes and various fabric and headrail options.
• Smart control features for convenient operation.

Image 1.1: ZSHINE Motorized Roller Shade in a living room setting. The shade is white with horizontal stripes, providing light filtering while maintaining an outdoor view.

2. Included Components

The standard package for your ZSHINE Motorized Roller Shade includes the following items:

• Motorized Roller Shade unit
• Mounting Hardware (brackets, screws, anchors)
• Remote Control (requires CR2032 battery, usually included)
• USB Type-C Charging Cable
• User Manual (this document)

Depending on your order, additional components may include a USB charger, power bank, or solar panel (optional accessories).

3. Product Specifications

Image 3.1: Comparison of ZSHINE motor types. The ZM25-EAZ motor offers direct compatibility with Alexa, a rolling speed of 30 RPM, noise level of 30-40dB, and a battery capacity of 500+ runs.

4. Installation

This section provides instructions for installing your ZSHINE Motorized Roller Shades. All necessary mounting hardware is included. For visual guidance, refer to the provided images and consider searching for official installation videos.

4.1. Measuring Your Window

Accurate measurements are crucial for proper fit and function. Determine whether you will be performing an internal (inside mount) or external (outside mount) installation.

• Internal Installation: Measure the width at three points (top, middle, bottom) and use the minimum value. Measure the net height of the window. Ensure a minimum depth of 2.5 inches for the window frame. The manufacturer will consider installation clearance.
• External Installation: Measure the net width and add 6 inches for total order width. Measure the net height and add 8 inches for total order height.

Image 4.1: Detailed guide for measuring window dimensions for both internal and external mounting of roller shades.

4.2. Mounting the Brackets

1. Prepare the Area: Ensure the window frame is level and plumb. This is especially important for inside mounts to ensure the shade hangs correctly.
2. Mark Bracket Positions: Position the brackets according to your chosen mounting type (inside or outside mount). The width of the blind refers to the spacing between the brackets.
3. Drill Pilot Holes: Use an appropriate drill bit to create pilot holes for the screws.
4. Secure Brackets: Attach the mounting brackets securely using the provided screws and anchors. Ensure they are level with each other.

Image 4.2: Illustration of roller blind width, fabric width, and bracket dimensions for both standard and reverse roll configurations.

4.3. Attaching the Shade Unit

1. Orient the Motor: Mount the motor assembly so that the "setting" button and USB charging port are easily accessible.
2. Insert the Shade: Carefully insert the roller shade unit into the mounted brackets. Ensure it clicks securely into place.
3. Antenna Placement: The motor unit has a pigtail antenna for remote commands. It will function correctly if taped away from sight.

Image 4.3: Comparison illustrating the difference in light gaps between shades installed with and without a shading slot.

5. Setup and Configuration

After installation, the shade needs to be paired with its remote control and have its travel limits set. If you have multiple shades, careful attention is needed during programming to avoid interference.

5.1. Charging the Battery

Before initial use or setup, ensure the shade's internal battery is charged. Connect the provided USB Type-C charging cable to the charging port on the motor unit. A full charge typically takes approximately 4 hours and provides about 300 cycles of operation.

Image 5.1: Charging options for the motorized shades, including a USB-C cable with adapter, a power bank, and an optional solar panel for continuous charging.

5.2. Remote Control Pairing

Each shade comes with a remote controller. The remote requires a CR2032 battery. The "setting" button on the motor is typically a small, round plastic lens that also serves as an orange LED indicator.

1. Identify the Setting Button: Locate the "setting" button on the motor unit. It is often a small, recessed button or a plastic lens.
2. Initiate Pairing: Press and hold the "setting" button on the motor until the shade jogs slightly or the LED indicator changes.
3. Select Channel on Remote: On your remote control, select the desired channel (remotes typically have 6 channels).
4. Confirm Pairing: Press the "Up" or "Down" button on the remote. The shade should respond, indicating successful pairing.

Important Note for Multiple Shades:

If you are programming multiple shades in close proximity, it is highly recommended to power off or physically move other shades out of range during the pairing and limit setting process to prevent unintended programming. The remote's signal can be received by all motors within range.

5.3. Setting Upper and Lower Travel Limits

After pairing, you must set the upper and lower stopping points for the shade's movement.

1. Enter Limit Setting Mode: Refer to your remote's specific instructions for entering limit setting mode. This usually involves a combination of button presses.
2. Adjust Upper Limit: Use the "Up" and "Down" buttons on the remote to move the shade to your desired upper stopping position. Use the micro-adjustment buttons for fine-tuning.
3. Save Upper Limit: Confirm the upper limit according to your remote's instructions (e.g., press a "Set" or "Limit" button).
4. Adjust Lower Limit: Move the shade to your desired lower stopping position using the "Up" and "Down" buttons and micro-adjustments.
5. Save Lower Limit: Confirm the lower limit.
6. Exit Limit Setting Mode: Exit the programming mode as per your remote's instructions.

If the travel limits become incorrect after moving the shade, you may need to reset and reprogram them.

5.4. Smart Control Integration (Alexa)

The ZM25-EAZ motor is designed for direct compatibility with Alexa. This means you can control your shades using voice commands through Amazon Echo devices.

1. Ensure Alexa Device is Set Up: Make sure your Amazon Echo device (e.g., Echo Studio, Echo 4th Gen, Echo Show) is properly set up and connected to your home Wi-Fi network.
2. Open Alexa App: Launch the Amazon Alexa app on your smartphone.
3. Discover Devices: Navigate to the "Devices" section in the Alexa app. Select the "+" icon to add a new device, then choose "Shade" or "Other Device" and follow the on-screen prompts to discover your ZSHINE shades.
4. Name Your Shade: Once discovered, assign a clear and easily recognizable name to your shade (e.g., "Living Room Shade," "Bedroom Window").
5. Voice Control: You can now use voice commands such as:
   • "Alexa, open [Shade Name]."
   • "Alexa, close [Shade Name]."
   • "Alexa, set [Shade Name] to 50%."

Note:

Some ZSHINE motor types (TQL25, AM25-Matter, ZM27-E) may require a separate smart bridge (e.g., Smart Key, Broadlink) for Alexa or HomeKit compatibility. The ZM25-EAZ model is designed for direct Alexa integration.

Image 5.2: Illustration of direct Alexa compatibility with the ZM25-EAZ motor, showing connection to the Alexa app and various Amazon Echo devices.