1. Introduction
Thank you for choosing the VEHHE High-Pressure Shower Head and 1.5m Hose. This product is designed to provide an enhanced showering experience with multiple spray modes and water-saving capabilities. This manual contains important information regarding the installation, operation, maintenance, and troubleshooting of your new shower system. Please read it thoroughly before use and retain it for future reference.
Key Features:
- High-Pressure Design: Engineered for a powerful and invigorating shower.
- 5 Spray Modes: Offers versatile showering options including powerful mist, powerful rain, rain massage, pulsed massage, and rain.
- Water-Saving: Designed to optimize water usage, saving approximately 30% water during daily showers.
- 1.5m Hose: Equipped with a durable 1.5-meter hose featuring solid brass fittings for reliability.
- Anti-Clogging Silicone Nozzles: Easy to clean and maintain, preventing mineral buildup.
- Durable Construction: Black finish with corrosion protection and salt tolerance.
2. Package Contents
Please check the package to ensure all items are present and undamaged:
- VEHHE High-Pressure Shower Head (1 unit)
- 1.5-meter Shower Hose with Brass Fittings (1 unit)
- Washers/Gaskets (as required for installation)
3. Safety Information
- Ensure water supply is turned off before installation to prevent leaks or injury.
- Do not overtighten connections, as this may damage threads or gaskets.
- Use appropriate tools for installation; avoid using excessive force.
- Regularly check for leaks and address them promptly.
- Keep out of reach of children during installation.
4. Setup and Installation
The VEHHE shower head and hose are designed for easy, tool-free installation with a universal G1/2 interface.
- Prepare for Installation: Turn off the main water supply to your shower. Remove your old shower head and hose by unscrewing them counter-clockwise from the shower arm. Clean any residue from the shower arm threads.
- Attach the Hose: Take the 1.5-meter shower hose. Ensure a washer is properly seated in each end of the hose. Connect one end of the hose to your shower arm by hand-tightening it clockwise. Do not use tools for this step to avoid damage.
- Attach the Shower Head: Connect the other end of the hose to the VEHHE shower head. Hand-tighten clockwise until secure.
- Check for Leaks: Turn the main water supply back on. Check all connections for any leaks. If leaks occur, gently tighten the connections further by hand. If leaks persist, ensure washers are correctly seated.
5. Operating Instructions
Your VEHHE shower head features 5 distinct spray modes, easily adjustable to suit your preference.
- Adjusting Spray Modes: Locate the selector switch or dial on the shower head. Rotate or slide this mechanism to cycle through the available spray patterns.
- Available Spray Modes:
- Powerful Mist: A fine, wide spray for gentle rinsing.
- Powerful Rain: A strong, full-body rain-like spray.
- Rain Massage: Combines the full rain spray with a pulsating massage.
- Pulsed Massage: A concentrated, invigorating pulsating spray.
- Rain: A classic, steady rain shower experience.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your VEHHE shower head.
- Cleaning Silicone Nozzles: The anti-clogging silicone nozzles are designed for easy cleaning. Simply wipe the nozzles with your finger or a soft cloth to dislodge any mineral deposits or debris. This should be done regularly, especially in hard water areas.
- General Cleaning: Clean the exterior of the shower head and hose with a soft cloth and mild soap or a non-abrasive bathroom cleaner. Avoid harsh chemicals or abrasive scrubbers, as these can damage the finish.
- Hose Inspection: Periodically inspect the hose for any signs of wear, kinks, or damage. Replace the hose if any issues are found to prevent leaks.
7. Troubleshooting
If you encounter any issues with your VEHHE shower head, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure | Clogged nozzles; low household water pressure. | Clean silicone nozzles by wiping them. Check if other faucets in your home have low pressure. |
| Leaking connections | Loose connections; improperly seated washers; damaged threads. | Hand-tighten all connections. Ensure washers are correctly placed. If threads are damaged, contact support. |
| Inconsistent spray pattern | Clogged nozzles; debris inside the shower head. | Clean the silicone nozzles. Detach the shower head and flush it with water to remove internal debris. |
| Hose is stiff or kinked | Normal wear; improper storage. | Ensure the hose hangs freely. If severely kinked or damaged, consider replacement. |
8. Specifications
- Model Number: WDHSTZ-BLK
- Product Dimensions (L x W x H): 12 x 6.5 x 12.7 cm (Shower Head); 1.5 meters (Hose Length)
- Weight: 440 grams
- Brand: VEHHE
- Material: Acrylonitrile Butadiene Styrene (ABS) with Silicone nozzles
- Finish Type: Painted (Black)
- Installation Type: Wall Mount
- Number of Spray Settings: 5
- Special Features: Water-saving, High-pressure, Anti-clogging silicone nozzles
9. Warranty and Support
VEHHE is committed to providing valuable products and customer satisfaction. If you encounter any problems during the use of our products, please do not hesitate to contact us. We are dedicated to actively assisting you and providing satisfactory solutions.
For support, please refer to the contact information provided with your purchase or visit the official VEHHE website.